DSL-2640R - Modem Router ADSL2+ Wireless G 54

[nomodeset]

Credo che tu intendessi dire il firmware "EU_1.17" giusto? Cmq ho provveduto ad aggiornarlo a questa versione e l'aggiornamento è andato a buon fine ma non ha risolto il problema...
É come se non inserissi il cavetto telefonico quindi al 90% sarà un guasto hardware... non si potrebbe far nulla?
In caso negativo il modem funziona perfettamente (a parte questo problema) non potrei riutilizzarlo in qualche modo come Repeater con qualche firmware modificato oppure creato apposte per lui tipo OpenWRT, DD-WRT etc.? è un peccato buttarlo, ma non posso usarlo come switch Lan o AP, mi piacerebbe rigenerarlo come Repeater che ne avrei bisogno per 1000 usi!

[bovirus]

Si ho corretto. 1.17.

[nomodeset]

Grazie tante "bovirus"
Allora cosa si potrebbe fare? A me interessa, ormai, il lato WIFI non mi interessa la parte di gestione ADSL. Come lo possiamo flashare il ragazzo?

[cooler]

Ciao spero qualcuno qui in grado di parlare inglese

I have DSL-2640R router and had firmware 1.11 on it but was having problems, I thought Flash old firmware and then flash back to the 1.11uk firmware.

Howerver I am now having the problem of flashing back the firmware, I get this error

Codice Seleziona Espandi

Server Error
A file system error was detected on the RomPager server.

Return to last page

My question is can I rename the file downloaded from dlink for this router to bin as it does not have any extension at the end of it.

and then use tftp method to flsh back?

Does Anyone with this router have backup in a bin please?

grazie

[bovirus]

For the Realink chipset the firmware filename doesn't have .bin extension.

The standard firmware file name is "ras".

Get the firmware file form first post.

Can use tftp to backup the firmware. I believe that you cannot use to write the firmware.

[Pondera]

@cooler
Probably you have a TalkTalk firmware. Sometime to upgrade to D-Link firmware and viceversa is possible only via TFTP.

[cooler]

@cooler
Probably you have a TalkTalk firmware. Sometime to upgrade to D-Link firmware and viceversa is possible only via TFTP.

Hi Pondera

Yes I had talktalk firmware then I updated to 1.11 from dlink download and flash fine and was working fine too untill I had some issues,  I then downloaded 1.06 also from dlink site and flashed and the problem was fixed but its old with missing features so when I tried to go back to 1.11 I keep getting the error above.

I also tried flash with tftp

Please note I can flash old 1.06 1.1mb firmware again fine, only the new 1.11 1.4mb fails.

Like this

tftp -i 192.168.1.1 put (EU_1.11) (EU_1.11)
I get erro RMbuff error

Does anyone here have tftp firmware.bin backup please this router.

Thanks

[Pondera]

Aggiornamento firmware DSL-2640R via TFTP (TrendChip/Ralink)
Utilizzare il client TFTP!

Aprire una finestra DOS (start>Esegui>"cmd") e connettersi via telnet alla BusyBox:

Codice Seleziona Espandi

telnet 192.168.1.1

Aprire un'altra finestra DOS e nella cartella di tftp.exe digitare:

Codice Seleziona Espandi

tftp -i 192.168.1.1 put ras c:\newras.bin

Fonte Stefan Kaiser
tftp -i [DeviceIP] put ras [localfile]

[cooler]

Pondera

That is what I did, followed the guide in the first and second post, above was example just from top of my head.

If I do this for example then it works, but with oldras

Codice Seleziona Espandi

telnet 192.168.1.1
tftp -i 192.168.1.1 get ras c:\oldras.bin

then

tftp -i 192.168.1.1 put ras c:\oldras.bin


But with 1.11 still the same error, Can I please have newras.bin file backup for 1.11_EU for this router from someone, the one in the first post forumbackup not downloading.

not working this method

Codice Seleziona Espandi


telnet 192.168.1.1
rename EU_1.11 to EU_1.11.bin

tftp -i 192.168.1.1 put ras c:\EU_1.11.bin

Thanks

[Pondera]

Yep! Beacause with this:

If I do this for example then it works, but with oldras

Codice Seleziona Espandi


telnet 192.168.1.1
tftp -i 192.168.1.1 get ras c:\oldras.bin

then

tftp -i 192.168.1.1 put ras c:\oldras.bin



first you backup your firmware and then you re-upgrade with the same one!

Remember that TFTP method is necessary only if browser upgrade method doesn't work. In that case try first with EU_1.06 via TFTP then to EU_1.17 via browser.

[cooler]

Yep! Beacause with this:

If I do this for example then it works, but with oldras

Codice Seleziona Espandi

telnet 192.168.1.1
tftp -i 192.168.1.1 get ras c:\oldras.bin

then

tftp -i 192.168.1.1 put ras c:\oldras.bin



first you backup your firmware and then you re-upgrade with the same one!

Remember that TFTP method is necessary only if browser upgrade method doesn't work. In that case try first with EU_1.06 via TFTP then to EU_1.17 via browser.

Ok I tried this from UK_1.06 to> EU_1.06 with tftp = worked good flash the firmware is now EU_1.06 router reboot, then web try for EU_1.17 fails with
error

Codice Seleziona Espandi

Server Error
A file system error was detected on the RomPager server.

Return to last page
 
Try EU_1.11 and EU_1.17 with tftp get this error

Codice Seleziona Espandi

Write Error with Error on server : Allocate  MBuf error
I think it's to do with the size 1.06 is 1.1mb and others are 1.4mb file sizes.

This is what is in the syslog = File too large<2> 1346425

[cooler]

OK, finally I got the router to take the fimware and this how I did.

1. Flash EU_1.06
2 reboot
3 login and with web-browser do restore defaults auto reboot.
4 now defaults all settings to D-link connect to d-link
5 telnet 192.168.1.1
6 type "sys romreset" will auto reboot
7 telnet 192.168.1.1 again
8 type "sys default" auto reboot
9 connect again and go to web browser then flash the firmware EU_1.11
10 from now on it can flash any other no problems just don't flash 1.06

I note before hardware 1.06 was B1 and with updated firmware hardware is B2!

Caio

[bovirus]

Hi colloer

Thanks for the guide.
The reset to default before & after a flashing is the right way to make a safe job

sys romreset - telnet comamnd to reset
sys default - telnet command to reload defalt valuse

[the dark79]

ciao ragazzi riscrivo perchè mi servirebbero gentilmente delle dritte,vorrei sbloccare le porte del mio router  DSL-2640R ma girando in rete vedo troppi video e tanti video diversi non sò quale seguire o quale sia il più attendibile.....grazie in anticipo....

[bovirus]

Indica per favore nello specifco sempre i dettagli.

Modello router revisione hardware/versione firmware
Sistema operativo client.

Esiste anche la funzione uPnp nel modem che non richiede se il programam che usi ha l'uPOnp di aprire le porte automaticamente.
Per usare il port forwarding l'IP del client deve essere fisso (non dinamico).

[Pondera]

Pubblicato nuovo firmware versione 1.17 build 02 data 20110408!

Codice Seleziona Espandi


Release Filename: DLinkEU_DSL-2640R_ 2.12.34.0(SREZ.E2)3.9.4.150_20110408 VT_1.17b02
Bootloader Version: VTC1.15 | 2007/11/12 17:18:52
Firmware Version: VT_1.17 (2.12.34.0(SREZ.E2)3.9.4.150)
Hardware Version: 8ASL261552A2G (B1)
Flash / Memory Size: 2M / 16M
Hardware Compatibility: TC3162P2H + TC3085
Software Compatibility: 2.12.34.0
ADSL Compatibility: ATM Driver 3.9.4.154_TC3085 Annex A
General Description: ADSL2+ Wireless Router



Change List
20110408 Modify firmware version to VT_1.17



Bugs Fixed History
20110325 Modify firmware version to VT_1.17b01

20110323 Recover multiple PVC feature.

20110224 Fixed DHCP server router setting subnet mask cannot work.
Issuer procedure:
a) Setup → Lan Setup
b) Configure router IP : 192.168.10.1/255.0.0.0
c) Configure DHCP IP range : 192.168.10.100 ~ 192.168.10.200
d) Apply and reboot
e) LAN PC gets IP 192.168.10.101 with subnet mask 255.255.255.0 from DHCP server

20101111 Add Parental Control feature in the web GUI.

20100301 Feature enhancement for BIT Torrent :
a) NATSession is modified to be 768
b) Command in the autoexec.net is modified "ip nat sessionrsv on 400 0 80" to be "ip nat sessionrsv on 76 0 8080".

20100208 For BIT Torrent verification


[giamrivo]

Qualcuno può indicare quali miglioramenti includa la nuova versione del firmware rispetto alla precedente EU_1.17. L'avete provato ?

[bovirus]

Se esistono i changelog dei firmware sono indicati vicono al firmware (ma non esistono quasi mai).

Non è necessariuo aggiornare se non si hanno specifici problemi.

[giamrivo]

Ho un DSL-2640R con firmware EU1.17 e nel system log del router trovo sempre questi errori anche se la linea funziona perfettamente. Qualcuno sa come risolvere il problema ?

System Log

Date/Time   Message
12/06/2012 23:27:10   PPP secondary DNS:213.205.36.70
12/06/2012 23:27:10   SNMP TRAP 3: link up
12/06/2012 23:27:10   Accept() fail
12/06/2012 23:27:10   Accept() fail
12/06/2012 23:27:15   netMakeChannDial: err=-3000 rn_p=80508ce8
12/06/2012 23:29:14   Last errorlog repeat 365 Times
12/06/2012 23:29:14   netMakeChannDial: err=-3000 rn_p=80508ce8
12/06/2012 23:32:18   Last errorlog repeat 477 Times
12/06/2012 23:32:25   netMakeChannDial: err=-3000 rn_p=80508ce8
12/06/2012 23:32:29   Last errorlog repeat 2 Times
12/06/2012 23:32:52   netMakeChannDial: err=-3000 rn_p=80508ce8
12/06/2012 23:32:56   Last errorlog repeat 2 Times
12/06/2012 23:32:56   netMakeChannDial: err=-3000 rn_p=80508ce8
12/06/2012 23:32:56   Last errorlog repeat 2 Times

[Pondera]

Prova con l'ultima versione VT_1.17b02.

Questa è la spiegazione:

Fonte ZyNOS System Error Log
-3000
Message: PINI ERROR netMakeChannDial: err=-3000, rn_p=576de0
Meaning: remote node is connecting already. (rn_p refers remote node point, it may change for different version, and different remote node number)
Solution: ask remote node to dial to you, then if you drop, you can dial; or reboot.


Che provider hai? Che tipo di abbonamento e fino a che velocità?
Parametri di connessione?
Pubblica i valori di linea misurati dal tuo dispositivo nella sezione Statistics.