DIR-880L: Router Gigabit Cloud Dual Band AC 1900

[Pondera]

Pubblicato firmware DIR-880L Ax 1.07 build 4 20160121.

Codice Seleziona Espandi


DIR-880L Firmware Release Notes
===============================

Hardware: A1
Firmware: v1.07b04
Date:     04/04/2016


Enhancements:

1. Added VLAN tagging
2. Improved Smart Connect functionality


N.B. La data nel documento fa riferimento alla pubblicazione sull'FTP AU e non alla data di rilascio del firmware.

[Pondera]

Nota edizione firmware DIR-880L Ax 1.07beta build 06_g2je 20160219.

Codice Seleziona Espandi


DIR-880L Release Note


Firmware: 1.07b06_g2je
Hardware: Ax
Date: 2016/02/19

Problems Resolved:
1. Fixed dispayed connected clients issue.
2. Fixed special characters issue in schedule setup.

Enhancements:
1. Add VLAN setup for WAN setup Static IP, Dynamic IP and PPPoE.
2. 1. Supporting hardware version A2.

Known Issues:
1. DHCP Reservation max. number issue. Will be fixed in next firmware.

----------------------

Firmware: FW1.05b01
Hardware: A1
Date: 2015/07/16

Problems Resolved:
1. Fixed Security vulnerability
- UPnP Buffer Overflow
- HTTP Buffer Overflow
For details visit: http://securityadvisories.dlink.com

Enhancements:
None

----------------------

Firmware: FW1.04b01
Hardware: A1
Date: 2015/04/19

Problems Resolved:
1. Fixed Security vulnerabilities as described on [SAP10054]
- HNAP Privilege Escalation
- Command Injection

For details visit:
http://securityadvisories.dlink.com/security/publication.aspx?name=SAP10054

Enhancements:
None

----------------------

Firmware: DIR880A1_FW103WWb02_ f1je.bin
Date: 2015/01/19

Problems Resolved:
1. Based on svn server version 405 for DRU request
2. Implement "offline information"
3. Let GUI do DF this query every "one minute" from USB drive.

----------------------

Firmware: DIR880A1_FW103b01_ecnh.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is similar as DIR880A1_FW103WWb01_ecnd.bin and just modifies the firmware name.

----------------------

Firmware: DIR880A1_FW103WWb01_ecnd.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is the same as DIR880A1_FW103b01fb_ecjk.bin without FaceBook WiFi function
2. The firmware name includes "WW" means worldwide.

----------------------

Firmware: DIR880A1_FW102b14_eci9.bin(Beta)
Date: 2014/12/18

Problems Resolved:
1. Fix when use DSP-W215 connect to ap. will cause kernel wifi panic

----------------------

Firmware: DIR880A1_FW102b13_ ebbe.bin
Date: 2014/11/11

Problems Resolved:
1. D-Link Yillin requests the behavior of enable or disable "Reserve IP" in client Edit Rule of Home.html should be followed the latest D-Link new GUI. When "Reserve IP" is disabled, it would show the current client IP address in "IP Address" item. When "Reserve IP" is enabled, it would show the input item with client reserved IP in "IP Address (Reserved)".
2. This firmware is base on DIR880A1_FW102b12_ ebae.bin and modified the files of Home.html and ConnectedClients.js without commit.

----------------------

Firmware: DIR880A1_FW102b12_ ebae.bin
Date: 2014/11/10

Problems Resolved:
1. D-Link Yillin request to contain three functions of "For manually input DDNS server address, we now support NO-IP (DDNS server)",  "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd" base on DIR880A1_FW102b11_ eb3i.bin.
2. For "For manually input DDNS server address, we now support NO-IP (DDNS server)" Refer DIR880A1_FW102b04_beta.bin (Without Commit).
3. For "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd", refer
 DIR880A1_FW102b02_e7sa.bin(1.IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.),
 DIR880A1_FW102b01_e7ge.bin(6.WAN ipv6 address should be none if wan type is auto detection with 6rd.),
 DIR880A1_FW101b11_e6p9.bin(when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not), and
 DIR880A1_FW101b10_e6hg.bin(1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address. 2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.). All of them are not Commit.

----------------------

Firmware: DIR880A1_FW102b11_ eb3i.bin
Date: 2014/11/03

Problems Resolved:
1. D-Link Yillin request to contain two functions of wireless 20/40Hz coexistence and new DHCP reservation base on DIR880A1_FW102b10_ eavk.bin.
2. For wireless 20/40Hz coexistence, refer DIR880A1_FW102b01_e7ge.bin, SVN version r48118 and SVN version r47749 (Without Commit).
3. For new DHCP reservation, refer DIR880A1_FW102b05_e8rh.bin, DIR880A1_FW102b03_e7ve.bin, SVN version r49254, SVN version, SVN version r49091 and SVN version r48362 and modify /js/ConnectedClients.js (Without Commit).
4. Show the MAC information in client info. Modify Home.html and /js/ConnectedClients.js (Without Commit).

----------------------

Firmware: DIR880A1_FW102b10_ eavk.bin
Date: 2014/10/31

Problems Resolved:
1. D-Link request release a normal firmware.
2. Recovery to SVN version r47396 which is the last normal firmware (DIR880A1_FW101b09_e6ck.bin)
3. Solve the issue that port input field of port forwarding could not be 64536 ~ 64999 (version r47396 already done)
4. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password (Without Commit)

----------------------

Firmware: DIR880A1_FW102b09_ eauh.bin
Date: 2014/10/30

Problems Resolved:
1. D-Link request release a normal firmware.
2. WEB is followed SVN r49417.
3. Webfile access and other code are latest SVN version.
4. Disable Facebook WiFi, Modify GUI to get the session storage of currneDevice
5. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password

----------------------

Firmware: DIR880A1_FW102b08_eaek.bin(Beta fw for DRU)
Date: 2014/10/14

Problems Resolved:
1. For DRU, remove RC4-128 on MPPE encryption from web, only support RC4-40 when setting quick VPN

----------------------

Firmware: DIR880A1_FW102b07_e9c8.bin
Date: 2014/09/12

Problems Resolved:
1. Update power table for FCC new rule (WRGAC16_Power Table_20140909)

----------------------

Firmware: DIR880A1_FW102b06_e99m.bin
Date: 2014/09/09

Problems Resolved:
1. Sync. to main trunk followed D-Link WEB GUI SVN server with version r362

----------------------

Firmware:DIR880A1_FW102b05_e8rh.bin(Beta)
Date: 2014/08/27

Problems Resolved:
1. Solve the problem the hostname of client which used DHCP reservation IP would be empty after reboot.
2. Solve the problem the popup message would show "IP address can't be the same" if the DHCP IP of client was reservation and then set the nick name.

----------------------

Firmware: DIR880A1_FW102b04_beta.bin (beta firmware)
Date: 2014/08/15

Problems Resolved:
1. For manually input DDNS server address, we now support NO-IP (DDNS server).

----------------------

Firmware:DIR880A1_FW102b03_e7ve.bin(Beta)
Date: 2014/07/31

Problems Resolved:
1. The dhcpd daemon could not be executed if the hostname of DHCP reservation is empty.
2. Sync. to D-Link WEB SVN server with version r351

----------------------

Firmware:DIR880A1_FW102b02_e7sa.bin
Date: 2014/07/28

Problems Resolved:
1. IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.

----------------------

Firmware:DIR880A1_FW102b01_e7ge.bin(DIR880A1_FW102b01nc_e7ge.bin)(Beta)
Date: 2014/07/16

Problems Resolved:
1. Sync. to D-Link WEB GUI SVN server with version 344.
2. Modify online help to http://dcms.dlink.com.tw/....
3. HT20/40 MHz Co-Exist Enable/Disable feature.
4. Add one return value for SetClientInfo HNAP action "ERROR_RESERVEIP_CONFLICT". If the GUI gets the return value, tell the user reservation IP is repeated.
5. OUI "C0-A0-BB" is not Cameo but D-Link. Modify MacList.js.
6. WAN ipv6 address should be none if wan type is auto detection with 6rd.
7. Solve the problem that happen kernel panic if enable guest zone when host zone is disabled. The guest zone use wrong profile to set host zone.

----------------------

Firmware:DIR880A1_FW101b11_e6p9.bin(DIR880A1_FW101b11nc_e6p9.bin)(Beta)
Date: 2014/06/25

Problems Resolved:
1. when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not
2. Sync. the D-Link WEB SVN server with version r328.

----------------------

Firmware:DIR880A1_FW101b10_e6hg.bin(DIR880A1_FW101b10nc_e6hg.bin)(Beta)
Date: 2014/06/17

Problems Resolved:
1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address.
2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.

----------------------

Firmware:DIR880A1_FW101b09_e6ck.bin(DIR880A1_FW101b09nc_e6ck.bin)
Date: 2014/06/12

Problems Resolved:
1. Sync to D-Link SVN server with GUI.
2. Fix lease time issue when WAN port is DHCP
3. Fix IP reserved issue

Enhancements:
1. VPN support for windows system without editing registry.
2. Support 2.4G implicit tx beamforming
3. Support Russia dual access
4. Update SG and CN power table


[Pondera]

Incrementare la velocità di trasmissione e ricezione della rete senza fili a 2,4 GHz del DIR-880L col firmware DD-WRT

Fonte Super User: dd wrt - How to increase Wireless Tx and Rx Rate

if I change to Mixed mode I can't use the 40MHz channel width. Changing it to use N/G allows me to choose the 40MHz channel width.

P.S. Impostando la selezione del canale di trasmissione manualmente.

Nota: i led blu delle due reti senza fili sembrano spenti (o non funzionare nel modo canonico).

[Pondera]

Pubblicato firmware DIR-880L Ax 1.07 build 08 20160401.

Codice Seleziona Espandi


DIR-880L Release Note


Firmware: 1.07b08
Hardware: Ax
Date: 2016/04/01

Problems Resolved:
1. Fix DHCP Reservation and Parental Corntrol.
Max number of DHCP Reservation rules = 24
Max number of Paretal Corntrol rules = 24

Enhancements:
1. Add WPS-PBC on/off function. Default is on.
2. Add WPS-PIN lock/unlock function. Lock is off - Unlock is on. Default is off.

----------------------

Firmware: 1.07b06_g2je
Hardware: Ax
Date: 2016/02/19

Problems Resolved:
1. Fixed dispayed connected clients issue.
2. Fixed special characters issue in schedule setup.

Enhancements:
1. Add VLAN setup for WAN setup Static IP, Dynamic IP and PPPoE.
2. 1. Supporting hardware version A2.

----------------------

Firmware: FW1.05b01
Hardware: A1
Date: 2015/07/16

Problems Resolved:
1. Fixed Security vulnerability
- UPnP Buffer Overflow
- HTTP Buffer Overflow
For details visit: http://securityadvisories.dlink.com

Enhancements:
None

----------------------

Firmware: FW1.04b01
Hardware: A1
Date: 2015/04/19

Problems Resolved:
1. Fixed Security vulnerabilities as described on [SAP10054]
- HNAP Privilege Escalation
- Command Injection

For details visit:
http://securityadvisories.dlink.com/security/publication.aspx?name=SAP10054

Enhancements:
None

----------------------

Firmware: DIR880A1_FW103WWb02_ f1je.bin
Date: 2015/01/19

Problems Resolved:
1. Based on svn server version 405 for DRU request
2. Implement "offline information"
3. Let GUI do DF this query every "one minute" from USB drive.

----------------------

Firmware: DIR880A1_FW103b01_ecnh.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is similar as DIR880A1_FW103WWb01_ecnd.bin and just modifies the firmware name.

----------------------

Firmware: DIR880A1_FW103WWb01_ecnd.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is the same as DIR880A1_FW103b01fb_ecjk.bin without FaceBook WiFi function
2. The firmware name includes "WW" means worldwide.

----------------------

Firmware: DIR880A1_FW102b14_eci9.bin(Beta)
Date: 2014/12/18

Problems Resolved:
1. Fix when use DSP-W215 connect to ap. will cause kernel wifi panic

----------------------

Firmware: DIR880A1_FW102b13_ ebbe.bin
Date: 2014/11/11

Problems Resolved:
1. D-Link Yillin requests the behavior of enable or disable "Reserve IP" in client Edit Rule of Home.html should be followed the latest D-Link new GUI. When "Reserve IP" is disabled, it would show the current client IP address in "IP Address" item. When "Reserve IP" is enabled, it would show the input item with client reserved IP in "IP Address (Reserved)".
2. This firmware is base on DIR880A1_FW102b12_ ebae.bin and modified the files of Home.html and ConnectedClients.js without commit.

----------------------

Firmware: DIR880A1_FW102b12_ ebae.bin
Date: 2014/11/10

Problems Resolved:
1. D-Link Yillin request to contain three functions of "For manually input DDNS server address, we now support NO-IP (DDNS server)",  "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd" base on DIR880A1_FW102b11_ eb3i.bin.
2. For "For manually input DDNS server address, we now support NO-IP (DDNS server)" Refer DIR880A1_FW102b04_beta.bin (Without Commit).
3. For "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd", refer
 DIR880A1_FW102b02_e7sa.bin(1.IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.),
 DIR880A1_FW102b01_e7ge.bin(6.WAN ipv6 address should be none if wan type is auto detection with 6rd.),
 DIR880A1_FW101b11_e6p9.bin(when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not), and
 DIR880A1_FW101b10_e6hg.bin(1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address. 2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.). All of them are not Commit.

----------------------

Firmware: DIR880A1_FW102b11_ eb3i.bin
Date: 2014/11/03

Problems Resolved:
1. D-Link Yillin request to contain two functions of wireless 20/40Hz coexistence and new DHCP reservation base on DIR880A1_FW102b10_ eavk.bin.
2. For wireless 20/40Hz coexistence, refer DIR880A1_FW102b01_e7ge.bin, SVN version r48118 and SVN version r47749 (Without Commit).
3. For new DHCP reservation, refer DIR880A1_FW102b05_e8rh.bin, DIR880A1_FW102b03_e7ve.bin, SVN version r49254, SVN version, SVN version r49091 and SVN version r48362 and modify /js/ConnectedClients.js (Without Commit).
4. Show the MAC information in client info. Modify Home.html and /js/ConnectedClients.js (Without Commit).

----------------------

Firmware: DIR880A1_FW102b10_ eavk.bin
Date: 2014/10/31

Problems Resolved:
1. D-Link request release a normal firmware.
2. Recovery to SVN version r47396 which is the last normal firmware (DIR880A1_FW101b09_e6ck.bin)
3. Solve the issue that port input field of port forwarding could not be 64536 ~ 64999 (version r47396 already done)
4. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password (Without Commit)

----------------------

Firmware: DIR880A1_FW102b09_ eauh.bin
Date: 2014/10/30

Problems Resolved:
1. D-Link request release a normal firmware.
2. WEB is followed SVN r49417.
3. Webfile access and other code are latest SVN version.
4. Disable Facebook WiFi, Modify GUI to get the session storage of currneDevice
5. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password

----------------------

Firmware: DIR880A1_FW102b08_eaek.bin(Beta fw for DRU)
Date: 2014/10/14

Problems Resolved:
1. For DRU, remove RC4-128 on MPPE encryption from web, only support RC4-40 when setting quick VPN

----------------------

Firmware: DIR880A1_FW102b07_e9c8.bin
Date: 2014/09/12

Problems Resolved:
1. Update power table for FCC new rule (WRGAC16_Power Table_20140909)

----------------------

Firmware: DIR880A1_FW102b06_e99m.bin
Date: 2014/09/09

Problems Resolved:
1. Sync. to main trunk followed D-Link WEB GUI SVN server with version r362

----------------------

Firmware:DIR880A1_FW102b05_e8rh.bin(Beta)
Date: 2014/08/27

Problems Resolved:
1. Solve the problem the hostname of client which used DHCP reservation IP would be empty after reboot.
2. Solve the problem the popup message would show "IP address can't be the same" if the DHCP IP of client was reservation and then set the nick name.

----------------------

Firmware: DIR880A1_FW102b04_beta.bin (beta firmware)
Date: 2014/08/15

Problems Resolved:
1. For manually input DDNS server address, we now support NO-IP (DDNS server).

----------------------

Firmware:DIR880A1_FW102b03_e7ve.bin(Beta)
Date: 2014/07/31

Problems Resolved:
1. The dhcpd daemon could not be executed if the hostname of DHCP reservation is empty.
2. Sync. to D-Link WEB SVN server with version r351

----------------------

Firmware:DIR880A1_FW102b02_e7sa.bin
Date: 2014/07/28

Problems Resolved:
1. IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.

----------------------

Firmware:DIR880A1_FW102b01_e7ge.bin(DIR880A1_FW102b01nc_e7ge.bin)(Beta)
Date: 2014/07/16

Problems Resolved:
1. Sync. to D-Link WEB GUI SVN server with version 344.
2. Modify online help to http://dcms.dlink.com.tw/....
3. HT20/40 MHz Co-Exist Enable/Disable feature.
4. Add one return value for SetClientInfo HNAP action "ERROR_RESERVEIP_CONFLICT". If the GUI gets the return value, tell the user reservation IP is repeated.
5. OUI "C0-A0-BB" is not Cameo but D-Link. Modify MacList.js.
6. WAN ipv6 address should be none if wan type is auto detection with 6rd.
7. Solve the problem that happen kernel panic if enable guest zone when host zone is disabled. The guest zone use wrong profile to set host zone.

----------------------

Firmware:DIR880A1_FW101b11_e6p9.bin(DIR880A1_FW101b11nc_e6p9.bin)(Beta)
Date: 2014/06/25

Problems Resolved:
1. when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not
2. Sync. the D-Link WEB SVN server with version r328.

----------------------

Firmware:DIR880A1_FW101b10_e6hg.bin(DIR880A1_FW101b10nc_e6hg.bin)(Beta)
Date: 2014/06/17

Problems Resolved:
1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address.
2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.

----------------------

Firmware:DIR880A1_FW101b09_e6ck.bin(DIR880A1_FW101b09nc_e6ck.bin)
Date: 2014/06/12

Problems Resolved:
1. Sync to D-Link SVN server with GUI.
2. Fix lease time issue when WAN port is DHCP
3. Fix IP reserved issue

Enhancements:
1. VPN support for windows system without editing registry.
2. Support 2.4G implicit tx beamforming
3. Support Russia dual access
4. Update SG and CN power table


Note
Finalmente hanno aggiunto la gestione del WPS nella nuova interfaccia per poterlo disattivare!
Si sono dimenticati di far cambiare il LED della WAN da arancio a blu quando connesso.
Sembra avere problemi di connessione PPPoE col modem in bridge: bisogna riavviare per farlo connettere.
Non riesce a leggere i dati del server NTP D-Link o impostato manualmente.

[Pondera]

Pubblicato firmware DIR-880L Ax 1.07 build 08 20160226.

Codice Seleziona Espandi


DIR-880L Firmware Release Notes

Firmware: FW1.07.B08 (Release)
Hardware: A1
Date: 2016/04/26

Notes:
None

Problems Resolved:
None

Enhancements:
1. Support basic VLAN tagging on WAN (Internet Port) for special Internet accessing, using Static IP, DHCP or PPPoE
2. Wireless multicast improvement
3. Edge browser compatibility improvement
4. Support MAC clone for PPPoE
5. Support Schedule Reboot
6. Adding HT20/40 Coexistence for 2.4GHz wireless on management UI
7. Extends the number of rules from 15 to 24. (Static Route IPv4 and v6, Port Forwarding, Firewall IPv4 and v6, Virtual Server, Website Filter)
8. Parental control in Connected Client page can now be manually assigned to unconnected clients

Known Issues:
None
_______________________________________________________________________________________________________________________________________________

Firmware: FW1.05.B02 (Release)
Hardware: A1
Date: 2015/09/02

Notes:
None

Problems Resolved:
1. Resolve login UI issue while captcha is enabled
2. Resolve multicast issue
3. Fixed the following Security Vulnerabilities:
- HNAP Privilege Escalation
- Command Injection

Enhancements:
1. Improve Smart Connect Functionality
2. QoS Maximum bandwidth is now configurable

Known Issues:
None


Note
Nessun dei problemi rilevati con la stessa versione avente data 20160401 pubblicata precedentemente.
Non è presente la disattivazione WPS.
Quindi al momento consigliamo questa versione.

[Pondera]

Dalla versione DD-WRT 05-19-2016-r29739 webflash alla 06-02-2016-r29816 webflash dopo l'aggiornamento il firmware resta su 05-19-2016-r29739; probabilmente per via delle nuove dimensioni maggiori del file firmware.
Risolto da Recovery aggiornando alla 06-02-2016-r29816 factory e poi dall'interfaccia alla 06-02-2016-r29816 webflash.

[Pondera]

Pubblicato firmware DIR-880L Ax 1.08 build 01 20160425.

Codice Seleziona Espandi


DIR-880L Change Note


Firmware: 1.08b01
Hardware: Ax
Date: 2016/04/25

Enhancements:
1. Supports character $ @ ! % # in Admin password.
2. Add VLAN support in internet setup Router mode: Static IP, Dynamic IP and PPPoE

----------------------

Firmware: 1.07b08
Hardware: Ax
Date: 2016/04/01

Problems Resolved:
1. Fix DHCP Reservation and Parental Corntrol.
Max number of DHCP Reservation rules = 24
Max number of Paretal Corntrol rules = 24

Enhancements:
1. Add WPS-PBC on/off function. Default is on.
2. Add WPS-PIN lock/unlock function. Lock is off - Unlock is on. Default is off.

----------------------

Firmware: 1.07b06_g2je
Hardware: Ax
Date: 2016/02/19

Problems Resolved:
1. Fixed dispayed connected clients issue.
2. Fixed special characters issue in schedule setup.

Enhancements:
1. Add VLAN setup for WAN setup Static IP, Dynamic IP and PPPoE.
2. 1. Supporting hardware version A2.

----------------------

Firmware: FW1.05b01
Hardware: A1
Date: 2015/07/16

Problems Resolved:
1. Fixed Security vulnerability
- UPnP Buffer Overflow
- HTTP Buffer Overflow
For details visit: http://securityadvisories.dlink.com

Enhancements:
None

----------------------

Firmware: FW1.04b01
Hardware: A1
Date: 2015/04/19

Problems Resolved:
1. Fixed Security vulnerabilities as described on [SAP10054]
- HNAP Privilege Escalation
- Command Injection

For details visit:
http://securityadvisories.dlink.com/security/publication.aspx?name=SAP10054

Enhancements:
None

----------------------

Firmware: DIR880A1_FW103WWb02_ f1je.bin
Date: 2015/01/19

Problems Resolved:
1. Based on svn server version 405 for DRU request
2. Implement "offline information"
3. Let GUI do DF this query every "one minute" from USB drive.

----------------------

Firmware: DIR880A1_FW103b01_ecnh.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is similar as DIR880A1_FW103WWb01_ecnd.bin and just modifies the firmware name.

----------------------

Firmware: DIR880A1_FW103WWb01_ecnd.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is the same as DIR880A1_FW103b01fb_ecjk.bin without FaceBook WiFi function
2. The firmware name includes "WW" means worldwide.

----------------------

Firmware: DIR880A1_FW102b14_eci9.bin(Beta)
Date: 2014/12/18

Problems Resolved:
1. Fix when use DSP-W215 connect to ap. will cause kernel wifi panic

----------------------

Firmware: DIR880A1_FW102b13_ ebbe.bin
Date: 2014/11/11

Problems Resolved:
1. D-Link Yillin requests the behavior of enable or disable "Reserve IP" in client Edit Rule of Home.html should be followed the latest D-Link new GUI. When "Reserve IP" is disabled, it would show the current client IP address in "IP Address" item. When "Reserve IP" is enabled, it would show the input item with client reserved IP in "IP Address (Reserved)".
2. This firmware is base on DIR880A1_FW102b12_ ebae.bin and modified the files of Home.html and ConnectedClients.js without commit.

----------------------

Firmware: DIR880A1_FW102b12_ ebae.bin
Date: 2014/11/10

Problems Resolved:
1. D-Link Yillin request to contain three functions of "For manually input DDNS server address, we now support NO-IP (DDNS server)",  "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd" base on DIR880A1_FW102b11_ eb3i.bin.
2. For "For manually input DDNS server address, we now support NO-IP (DDNS server)" Refer DIR880A1_FW102b04_beta.bin (Without Commit).
3. For "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd", refer
 DIR880A1_FW102b02_e7sa.bin(1.IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.),
 DIR880A1_FW102b01_e7ge.bin(6.WAN ipv6 address should be none if wan type is auto detection with 6rd.),
 DIR880A1_FW101b11_e6p9.bin(when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not), and
 DIR880A1_FW101b10_e6hg.bin(1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address. 2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.). All of them are not Commit.

----------------------

Firmware: DIR880A1_FW102b11_ eb3i.bin
Date: 2014/11/03

Problems Resolved:
1. D-Link Yillin request to contain two functions of wireless 20/40Hz coexistence and new DHCP reservation base on DIR880A1_FW102b10_ eavk.bin.
2. For wireless 20/40Hz coexistence, refer DIR880A1_FW102b01_e7ge.bin, SVN version r48118 and SVN version r47749 (Without Commit).
3. For new DHCP reservation, refer DIR880A1_FW102b05_e8rh.bin, DIR880A1_FW102b03_e7ve.bin, SVN version r49254, SVN version, SVN version r49091 and SVN version r48362 and modify /js/ConnectedClients.js (Without Commit).
4. Show the MAC information in client info. Modify Home.html and /js/ConnectedClients.js (Without Commit).

----------------------

Firmware: DIR880A1_FW102b10_ eavk.bin
Date: 2014/10/31

Problems Resolved:
1. D-Link request release a normal firmware.
2. Recovery to SVN version r47396 which is the last normal firmware (DIR880A1_FW101b09_e6ck.bin)
3. Solve the issue that port input field of port forwarding could not be 64536 ~ 64999 (version r47396 already done)
4. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password (Without Commit)

----------------------

Firmware: DIR880A1_FW102b09_ eauh.bin
Date: 2014/10/30

Problems Resolved:
1. D-Link request release a normal firmware.
2. WEB is followed SVN r49417.
3. Webfile access and other code are latest SVN version.
4. Disable Facebook WiFi, Modify GUI to get the session storage of currneDevice
5. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password

----------------------

Firmware: DIR880A1_FW102b08_eaek.bin(Beta fw for DRU)
Date: 2014/10/14

Problems Resolved:
1. For DRU, remove RC4-128 on MPPE encryption from web, only support RC4-40 when setting quick VPN

----------------------

Firmware: DIR880A1_FW102b07_e9c8.bin
Date: 2014/09/12

Problems Resolved:
1. Update power table for FCC new rule (WRGAC16_Power Table_20140909)

----------------------

Firmware: DIR880A1_FW102b06_e99m.bin
Date: 2014/09/09

Problems Resolved:
1. Sync. to main trunk followed D-Link WEB GUI SVN server with version r362

----------------------

Firmware:DIR880A1_FW102b05_e8rh.bin(Beta)
Date: 2014/08/27

Problems Resolved:
1. Solve the problem the hostname of client which used DHCP reservation IP would be empty after reboot.
2. Solve the problem the popup message would show "IP address can't be the same" if the DHCP IP of client was reservation and then set the nick name.

----------------------

Firmware: DIR880A1_FW102b04_beta.bin (beta firmware)
Date: 2014/08/15

Problems Resolved:
1. For manually input DDNS server address, we now support NO-IP (DDNS server).

----------------------

Firmware:DIR880A1_FW102b03_e7ve.bin(Beta)
Date: 2014/07/31

Problems Resolved:
1. The dhcpd daemon could not be executed if the hostname of DHCP reservation is empty.
2. Sync. to D-Link WEB SVN server with version r351

----------------------

Firmware:DIR880A1_FW102b02_e7sa.bin
Date: 2014/07/28

Problems Resolved:
1. IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.

----------------------

Firmware:DIR880A1_FW102b01_e7ge.bin(DIR880A1_FW102b01nc_e7ge.bin)(Beta)
Date: 2014/07/16

Problems Resolved:
1. Sync. to D-Link WEB GUI SVN server with version 344.
2. Modify online help to http://dcms.dlink.com.tw/....
3. HT20/40 MHz Co-Exist Enable/Disable feature.
4. Add one return value for SetClientInfo HNAP action "ERROR_RESERVEIP_CONFLICT". If the GUI gets the return value, tell the user reservation IP is repeated.
5. OUI "C0-A0-BB" is not Cameo but D-Link. Modify MacList.js.
6. WAN ipv6 address should be none if wan type is auto detection with 6rd.
7. Solve the problem that happen kernel panic if enable guest zone when host zone is disabled. The guest zone use wrong profile to set host zone.

----------------------

Firmware:DIR880A1_FW101b11_e6p9.bin(DIR880A1_FW101b11nc_e6p9.bin)(Beta)
Date: 2014/06/25

Problems Resolved:
1. when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not
2. Sync. the D-Link WEB SVN server with version r328.

----------------------

Firmware:DIR880A1_FW101b10_e6hg.bin(DIR880A1_FW101b10nc_e6hg.bin)(Beta)
Date: 2014/06/17

Problems Resolved:
1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address.
2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.

----------------------

Firmware:DIR880A1_FW101b09_e6ck.bin(DIR880A1_FW101b09nc_e6ck.bin)
Date: 2014/06/12

Problems Resolved:
1. Sync to D-Link SVN server with GUI.
2. Fix lease time issue when WAN port is DHCP
3. Fix IP reserved issue

Enhancements:
1. VPN support for windows system without editing registry.
2. Support 2.4G implicit tx beamforming
3. Support Russia dual access
4. Update SG and CN power table


[Pondera]

Pubblicato firmware DIR-880L Ax 1.08 build 03 20160714.

Codice Seleziona Espandi


DIR-880L Change Note


Firmware: 1.08b03
Hardware: Ax
Date: 2016/07/14

Problems Resolved:
1. Fix issue of Change WAN mode from DHCP to PPPoE, PPPoE dail will stuck few minutes

Enhancements:
1. Default disable WPS-PIN function

----------------------

Firmware: 1.08b02
Hardware: Ax
Date: 2016/06/07

Problems Resolved:
1. Fix issue of PPPoE connection fail
2. Fix bug : when guest zone is enabled, all primary wifi clients will become LAN clients on connected client page
3. Fix PPPoE NAT low throughput issue

----------------------

Firmware: 1.08b01
Hardware: Ax
Date: 2016/04/25

Enhancements:
1. Supports character $ @ ! % # in Admin password.
2. Add VLAN support in internet setup Router mode: Static IP, Dynamic IP and PPPoE

----------------------

Firmware: 1.07b08
Hardware: Ax
Date: 2016/04/01

Problems Resolved:
1. Fix DHCP Reservation and Parental Corntrol.
Max number of DHCP Reservation rules = 24
Max number of Paretal Corntrol rules = 24

Enhancements:
1. Add WPS-PBC on/off function. Default is on.
2. Add WPS-PIN lock/unlock function. Lock is off - Unlock is on. Default is off.

----------------------

Firmware: 1.07b06_g2je
Hardware: Ax
Date: 2016/02/19

Problems Resolved:
1. Fixed dispayed connected clients issue.
2. Fixed special characters issue in schedule setup.

Enhancements:
1. Add VLAN setup for WAN setup Static IP, Dynamic IP and PPPoE.
2. 1. Supporting hardware version A2.

----------------------

Firmware: FW1.05b01
Hardware: A1
Date: 2015/07/16

Problems Resolved:
1. Fixed Security vulnerability
- UPnP Buffer Overflow
- HTTP Buffer Overflow
For details visit: http://securityadvisories.dlink.com

Enhancements:
None

----------------------

Firmware: FW1.04b01
Hardware: A1
Date: 2015/04/19

Problems Resolved:
1. Fixed Security vulnerabilities as described on [SAP10054]
- HNAP Privilege Escalation
- Command Injection

For details visit:
http://securityadvisories.dlink.com/security/publication.aspx?name=SAP10054

Enhancements:
None

----------------------

Firmware: DIR880A1_FW103WWb02_ f1je.bin
Date: 2015/01/19

Problems Resolved:
1. Based on svn server version 405 for DRU request
2. Implement "offline information"
3. Let GUI do DF this query every "one minute" from USB drive.

----------------------

Firmware: DIR880A1_FW103b01_ecnh.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is similar as DIR880A1_FW103WWb01_ecnd.bin and just modifies the firmware name.

----------------------

Firmware: DIR880A1_FW103WWb01_ecnd.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is the same as DIR880A1_FW103b01fb_ecjk.bin without FaceBook WiFi function
2. The firmware name includes "WW" means worldwide.

----------------------

Firmware: DIR880A1_FW102b14_eci9.bin(Beta)
Date: 2014/12/18

Problems Resolved:
1. Fix when use DSP-W215 connect to ap. will cause kernel wifi panic

----------------------

Firmware: DIR880A1_FW102b13_ ebbe.bin
Date: 2014/11/11

Problems Resolved:
1. D-Link Yillin requests the behavior of enable or disable "Reserve IP" in client Edit Rule of Home.html should be followed the latest D-Link new GUI. When "Reserve IP" is disabled, it would show the current client IP address in "IP Address" item. When "Reserve IP" is enabled, it would show the input item with client reserved IP in "IP Address (Reserved)".
2. This firmware is base on DIR880A1_FW102b12_ ebae.bin and modified the files of Home.html and ConnectedClients.js without commit.

----------------------

Firmware: DIR880A1_FW102b12_ ebae.bin
Date: 2014/11/10

Problems Resolved:
1. D-Link Yillin request to contain three functions of "For manually input DDNS server address, we now support NO-IP (DDNS server)",  "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd" base on DIR880A1_FW102b11_ eb3i.bin.
2. For "For manually input DDNS server address, we now support NO-IP (DDNS server)" Refer DIR880A1_FW102b04_beta.bin (Without Commit).
3. For "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd", refer
 DIR880A1_FW102b02_e7sa.bin(1.IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.),
 DIR880A1_FW102b01_e7ge.bin(6.WAN ipv6 address should be none if wan type is auto detection with 6rd.),
 DIR880A1_FW101b11_e6p9.bin(when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not), and
 DIR880A1_FW101b10_e6hg.bin(1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address. 2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.). All of them are not Commit.

----------------------

Firmware: DIR880A1_FW102b11_ eb3i.bin
Date: 2014/11/03

Problems Resolved:
1. D-Link Yillin request to contain two functions of wireless 20/40Hz coexistence and new DHCP reservation base on DIR880A1_FW102b10_ eavk.bin.
2. For wireless 20/40Hz coexistence, refer DIR880A1_FW102b01_e7ge.bin, SVN version r48118 and SVN version r47749 (Without Commit).
3. For new DHCP reservation, refer DIR880A1_FW102b05_e8rh.bin, DIR880A1_FW102b03_e7ve.bin, SVN version r49254, SVN version, SVN version r49091 and SVN version r48362 and modify /js/ConnectedClients.js (Without Commit).
4. Show the MAC information in client info. Modify Home.html and /js/ConnectedClients.js (Without Commit).

----------------------

Firmware: DIR880A1_FW102b10_ eavk.bin
Date: 2014/10/31

Problems Resolved:
1. D-Link request release a normal firmware.
2. Recovery to SVN version r47396 which is the last normal firmware (DIR880A1_FW101b09_e6ck.bin)
3. Solve the issue that port input field of port forwarding could not be 64536 ~ 64999 (version r47396 already done)
4. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password (Without Commit)

----------------------

Firmware: DIR880A1_FW102b09_ eauh.bin
Date: 2014/10/30

Problems Resolved:
1. D-Link request release a normal firmware.
2. WEB is followed SVN r49417.
3. Webfile access and other code are latest SVN version.
4. Disable Facebook WiFi, Modify GUI to get the session storage of currneDevice
5. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password

----------------------

Firmware: DIR880A1_FW102b08_eaek.bin(Beta fw for DRU)
Date: 2014/10/14

Problems Resolved:
1. For DRU, remove RC4-128 on MPPE encryption from web, only support RC4-40 when setting quick VPN

----------------------

Firmware: DIR880A1_FW102b07_e9c8.bin
Date: 2014/09/12

Problems Resolved:
1. Update power table for FCC new rule (WRGAC16_Power Table_20140909)

----------------------

Firmware: DIR880A1_FW102b06_e99m.bin
Date: 2014/09/09

Problems Resolved:
1. Sync. to main trunk followed D-Link WEB GUI SVN server with version r362

----------------------

Firmware:DIR880A1_FW102b05_e8rh.bin(Beta)
Date: 2014/08/27

Problems Resolved:
1. Solve the problem the hostname of client which used DHCP reservation IP would be empty after reboot.
2. Solve the problem the popup message would show "IP address can't be the same" if the DHCP IP of client was reservation and then set the nick name.

----------------------

Firmware: DIR880A1_FW102b04_beta.bin (beta firmware)
Date: 2014/08/15

Problems Resolved:
1. For manually input DDNS server address, we now support NO-IP (DDNS server).

----------------------

Firmware:DIR880A1_FW102b03_e7ve.bin(Beta)
Date: 2014/07/31

Problems Resolved:
1. The dhcpd daemon could not be executed if the hostname of DHCP reservation is empty.
2. Sync. to D-Link WEB SVN server with version r351

----------------------

Firmware:DIR880A1_FW102b02_e7sa.bin
Date: 2014/07/28

Problems Resolved:
1. IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.

----------------------

Firmware:DIR880A1_FW102b01_e7ge.bin(DIR880A1_FW102b01nc_e7ge.bin)(Beta)
Date: 2014/07/16

Problems Resolved:
1. Sync. to D-Link WEB GUI SVN server with version 344.
2. Modify online help to http://dcms.dlink.com.tw/....
3. HT20/40 MHz Co-Exist Enable/Disable feature.
4. Add one return value for SetClientInfo HNAP action "ERROR_RESERVEIP_CONFLICT". If the GUI gets the return value, tell the user reservation IP is repeated.
5. OUI "C0-A0-BB" is not Cameo but D-Link. Modify MacList.js.
6. WAN ipv6 address should be none if wan type is auto detection with 6rd.
7. Solve the problem that happen kernel panic if enable guest zone when host zone is disabled. The guest zone use wrong profile to set host zone.

----------------------

Firmware:DIR880A1_FW101b11_e6p9.bin(DIR880A1_FW101b11nc_e6p9.bin)(Beta)
Date: 2014/06/25

Problems Resolved:
1. when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not
2. Sync. the D-Link WEB SVN server with version r328.

----------------------

Firmware:DIR880A1_FW101b10_e6hg.bin(DIR880A1_FW101b10nc_e6hg.bin)(Beta)
Date: 2014/06/17

Problems Resolved:
1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address.
2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.

----------------------

Firmware:DIR880A1_FW101b09_e6ck.bin(DIR880A1_FW101b09nc_e6ck.bin)
Date: 2014/06/12

Problems Resolved:
1. Sync to D-Link SVN server with GUI.
2. Fix lease time issue when WAN port is DHCP
3. Fix IP reserved issue

Enhancements:
1. VPN support for windows system without editing registry.
2. Support 2.4G implicit tx beamforming
3. Support Russia dual access
4. Update SG and CN power table


[Pondera]

dal firmware D-Link DIR-880L A1 1.03 build 02_f1je 20150119 non è possibile disabilitare la funzione WPS

Risolto!

Codice Seleziona Espandi


Firmware: 1.08b03
Hardware: Ax
Date: 2016/07/14

[...]

Enhancements:
1. Default disable WPS-PIN function

[...]

Firmware: 1.07b08
Hardware: Ax
Date: 2016/04/01

[...]

Enhancements:
1. Add WPS-PBC on/off function. Default is on.
2. Add WPS-PIN lock/unlock function. Lock is off - Unlock is on. Default is off.


[Pondera]

Si sono dimenticati di far cambiare il LED della WAN da arancio a blu quando connesso.
Sembra avere problemi di connessione PPPoE col modem in bridge: bisogna riavviare per farlo connettere.
Non riesce a leggere i dati del server NTP D-Link o impostato manualmente.

Risolto!

Codice Seleziona Espandi


Firmware: 1.08b02
Hardware: Ax
Date: 2016/06/07

Problems Resolved:
1. Fix issue of PPPoE connection fail


[Pondera]

Pubblicato firmware DIR-880L Ax 1.08 build 04 20161019.

Codice Seleziona Espandi


DIR-880L Firmware Patch Notes

Firmware: FW1.08b04
Hardware: A1
Date: 2016/11/10

Note:
None

Problems Resolved:
1. HNAP stack overflow :: DIR-8xx Routers Affected : All Models have Remote Admin Disabled as Default

For more detailed information, please visit: http://supportannouncement.us.dlink.com/announcement/publication.aspx?name=SAP10066

Enhancements:
None

Known Issues:
None


[Pondera]

Revisionata ed aggiornata la sezione Documentazione nel 1° messaggio.

[Pondera]

Pubblicato firmware DIR-880L Ax 1.08 build 04-01 20161027 nel 1° messaggio di questa discussione.

Codice Seleziona Espandi


DIR-880L Change Note


Firmware: 1.08b04-01
Hardware: Ax
Date: 2016/10/27

Problems Resolved:
1. Fix issue mountain time zone

Enhancements:
None

----------------------

Firmware: 1.08b04
Hardware: Ax
Date: 2016/10/19

Problems Resolved:
1. Fix HNAP Service Stack-Based Buffer Overflow Vulnerability
CWE-121 CVE-2016-6563 VU#677427
http://www.kb.cert.org/vuls/id/677427

Enhancements:
None

----------------------

Firmware: 1.08b03
Hardware: Ax
Date: 2016/07/14

Problems Resolved:
1. Fix issue of Change WAN mode from DHCP to PPPoE, PPPoE dail will stuck few minutes

Enhancements:
1. Default disable WPS-PIN function

----------------------

Firmware: 1.08b02
Hardware: Ax
Date: 2016/06/07

Problems Resolved:
1. Fix issue of PPPoE connection fail
2. Fix bug : when guest zone is enabled, all primary wifi clients will become LAN clients on connected client page
3. Fix PPPoE NAT low throughput issue

----------------------

Firmware: 1.08b01
Hardware: Ax
Date: 2016/04/25

Enhancements:
1. Supports character $ @ ! % # in Admin password.
2. Add VLAN support in internet setup Router mode: Static IP, Dynamic IP and PPPoE

----------------------

Firmware: 1.07b08
Hardware: Ax
Date: 2016/04/01

Problems Resolved:
1. Fix DHCP Reservation and Parental Corntrol.
Max number of DHCP Reservation rules = 24
Max number of Paretal Corntrol rules = 24

Enhancements:
1. Add WPS-PBC on/off function. Default is on.
2. Add WPS-PIN lock/unlock function. Lock is off - Unlock is on. Default is off.

----------------------

Firmware: 1.07b06_g2je
Hardware: Ax
Date: 2016/02/19

Problems Resolved:
1. Fixed dispayed connected clients issue.
2. Fixed special characters issue in schedule setup.

Enhancements:
1. Add VLAN setup for WAN setup Static IP, Dynamic IP and PPPoE.
2. 1. Supporting hardware version A2.

----------------------

Firmware: FW1.05b01
Hardware: A1
Date: 2015/07/16

Problems Resolved:
1. Fixed Security vulnerability
- UPnP Buffer Overflow
- HTTP Buffer Overflow
For details visit: http://securityadvisories.dlink.com

Enhancements:
None

----------------------

Firmware: FW1.04b01
Hardware: A1
Date: 2015/04/19

Problems Resolved:
1. Fixed Security vulnerabilities as described on [SAP10054]
- HNAP Privilege Escalation
- Command Injection

For details visit:
http://securityadvisories.dlink.com/security/publication.aspx?name=SAP10054

Enhancements:
None

----------------------

Firmware: DIR880A1_FW103WWb02_ f1je.bin
Date: 2015/01/19

Problems Resolved:
1. Based on svn server version 405 for DRU request
2. Implement "offline information"
3. Let GUI do DF this query every "one minute" from USB drive.

----------------------

Firmware: DIR880A1_FW103b01_ecnh.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is similar as DIR880A1_FW103WWb01_ecnd.bin and just modifies the firmware name.

----------------------

Firmware: DIR880A1_FW103WWb01_ecnd.bin
Date: 2014/12/23

Problems Resolved:
1. The firmware is the same as DIR880A1_FW103b01fb_ecjk.bin without FaceBook WiFi function
2. The firmware name includes "WW" means worldwide.

----------------------

Firmware: DIR880A1_FW102b14_eci9.bin(Beta)
Date: 2014/12/18

Problems Resolved:
1. Fix when use DSP-W215 connect to ap. will cause kernel wifi panic

----------------------

Firmware: DIR880A1_FW102b13_ ebbe.bin
Date: 2014/11/11

Problems Resolved:
1. D-Link Yillin requests the behavior of enable or disable "Reserve IP" in client Edit Rule of Home.html should be followed the latest D-Link new GUI. When "Reserve IP" is disabled, it would show the current client IP address in "IP Address" item. When "Reserve IP" is enabled, it would show the input item with client reserved IP in "IP Address (Reserved)".
2. This firmware is base on DIR880A1_FW102b12_ ebae.bin and modified the files of Home.html and ConnectedClients.js without commit.

----------------------

Firmware: DIR880A1_FW102b12_ ebae.bin
Date: 2014/11/10

Problems Resolved:
1. D-Link Yillin request to contain three functions of "For manually input DDNS server address, we now support NO-IP (DDNS server)",  "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd" base on DIR880A1_FW102b11_ eb3i.bin.
2. For "For manually input DDNS server address, we now support NO-IP (DDNS server)" Refer DIR880A1_FW102b04_beta.bin (Without Commit).
3. For "IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot" and "WAN ipv6 address should be none if wan type is auto detection with 6rd", refer
 DIR880A1_FW102b02_e7sa.bin(1.IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.),
 DIR880A1_FW102b01_e7ge.bin(6.WAN ipv6 address should be none if wan type is auto detection with 6rd.),
 DIR880A1_FW101b11_e6p9.bin(when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not), and
 DIR880A1_FW101b10_e6hg.bin(1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address. 2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.). All of them are not Commit.

----------------------

Firmware: DIR880A1_FW102b11_ eb3i.bin
Date: 2014/11/03

Problems Resolved:
1. D-Link Yillin request to contain two functions of wireless 20/40Hz coexistence and new DHCP reservation base on DIR880A1_FW102b10_ eavk.bin.
2. For wireless 20/40Hz coexistence, refer DIR880A1_FW102b01_e7ge.bin, SVN version r48118 and SVN version r47749 (Without Commit).
3. For new DHCP reservation, refer DIR880A1_FW102b05_e8rh.bin, DIR880A1_FW102b03_e7ve.bin, SVN version r49254, SVN version, SVN version r49091 and SVN version r48362 and modify /js/ConnectedClients.js (Without Commit).
4. Show the MAC information in client info. Modify Home.html and /js/ConnectedClients.js (Without Commit).

----------------------

Firmware: DIR880A1_FW102b10_ eavk.bin
Date: 2014/10/31

Problems Resolved:
1. D-Link request release a normal firmware.
2. Recovery to SVN version r47396 which is the last normal firmware (DIR880A1_FW101b09_e6ck.bin)
3. Solve the issue that port input field of port forwarding could not be 64536 ~ 64999 (version r47396 already done)
4. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password (Without Commit)

----------------------

Firmware: DIR880A1_FW102b09_ eauh.bin
Date: 2014/10/30

Problems Resolved:
1. D-Link request release a normal firmware.
2. WEB is followed SVN r49417.
3. Webfile access and other code are latest SVN version.
4. Disable Facebook WiFi, Modify GUI to get the session storage of currneDevice
5. Modify Internet.html, Wizard.html and Wizard_Manual.html to set PPPoE with empty password

----------------------

Firmware: DIR880A1_FW102b08_eaek.bin(Beta fw for DRU)
Date: 2014/10/14

Problems Resolved:
1. For DRU, remove RC4-128 on MPPE encryption from web, only support RC4-40 when setting quick VPN

----------------------

Firmware: DIR880A1_FW102b07_e9c8.bin
Date: 2014/09/12

Problems Resolved:
1. Update power table for FCC new rule (WRGAC16_Power Table_20140909)

----------------------

Firmware: DIR880A1_FW102b06_e99m.bin
Date: 2014/09/09

Problems Resolved:
1. Sync. to main trunk followed D-Link WEB GUI SVN server with version r362

----------------------

Firmware:DIR880A1_FW102b05_e8rh.bin(Beta)
Date: 2014/08/27

Problems Resolved:
1. Solve the problem the hostname of client which used DHCP reservation IP would be empty after reboot.
2. Solve the problem the popup message would show "IP address can't be the same" if the DHCP IP of client was reservation and then set the nick name.

----------------------

Firmware: DIR880A1_FW102b04_beta.bin (beta firmware)
Date: 2014/08/15

Problems Resolved:
1. For manually input DDNS server address, we now support NO-IP (DDNS server).

----------------------

Firmware:DIR880A1_FW102b03_e7ve.bin(Beta)
Date: 2014/07/31

Problems Resolved:
1. The dhcpd daemon could not be executed if the hostname of DHCP reservation is empty.
2. Sync. to D-Link WEB SVN server with version r351

----------------------

Firmware:DIR880A1_FW102b02_e7sa.bin
Date: 2014/07/28

Problems Resolved:
1. IPv6 auto detection works fine in 6rd environment, but router won't send DHCP Discover to DHCP Server after reboot.

----------------------

Firmware:DIR880A1_FW102b01_e7ge.bin(DIR880A1_FW102b01nc_e7ge.bin)(Beta)
Date: 2014/07/16

Problems Resolved:
1. Sync. to D-Link WEB GUI SVN server with version 344.
2. Modify online help to http://dcms.dlink.com.tw/....
3. HT20/40 MHz Co-Exist Enable/Disable feature.
4. Add one return value for SetClientInfo HNAP action "ERROR_RESERVEIP_CONFLICT". If the GUI gets the return value, tell the user reservation IP is repeated.
5. OUI "C0-A0-BB" is not Cameo but D-Link. Modify MacList.js.
6. WAN ipv6 address should be none if wan type is auto detection with 6rd.
7. Solve the problem that happen kernel panic if enable guest zone when host zone is disabled. The guest zone use wrong profile to set host zone.

----------------------

Firmware:DIR880A1_FW101b11_e6p9.bin(DIR880A1_FW101b11nc_e6p9.bin)(Beta)
Date: 2014/06/25

Problems Resolved:
1. when connection type is 6rd and 6rd Configuration is 6rd DHCPv4 Option, if all /64 prefix assigned to LAN, WAN will have no ip address, thus we using wangateway to determine network is connected or not
2. Sync. the D-Link WEB SVN server with version r328.

----------------------

Firmware:DIR880A1_FW101b10_e6hg.bin(DIR880A1_FW101b10nc_e6hg.bin)(Beta)
Date: 2014/06/17

Problems Resolved:
1. Select IPv6 internet connection type as 6rd, user cannot save setting without input IPv6 DNS server IP address.
2. IPv6 6rd status always show disconnected and LAN side cannot get IPv6 IP address.

----------------------

Firmware:DIR880A1_FW101b09_e6ck.bin(DIR880A1_FW101b09nc_e6ck.bin)
Date: 2014/06/12

Problems Resolved:
1. Sync to D-Link SVN server with GUI.
2. Fix lease time issue when WAN port is DHCP
3. Fix IP reserved issue

Enhancements:
1. VPN support for windows system without editing registry.
2. Support 2.4G implicit tx beamforming
3. Support Russia dual access
4. Update SG and CN power table


[andyonos]

ho questo router da un mesetto, ho installato l'ultimo fw 1.08
Dopo circa 5/6 giorni di funzionamento regolare smette di essere raggiungibile da app e da pc con http://192.168.0.1
spegnendo accendendo torna a posto.
Qualche suggerimento? (già resettato, ricaricato fw)

[Pondera]

Come hai configurato Settings>Network?

[andyonos]

[Pondera]

Prova ad impostare come segue:

Tempo di validità DHCP: 60 minuti
Esegui sempre broadcast: [Abilitato] (compatibilità per alcuni client DHCP)

Facci sapere!

[andyonos]

ti ringrazio, proverò. Mi potresti gentilmente spiegare il significato di tale impostazione?
Sono in contatto con l'assistenza Dlink, mi hanno scritto che chiedono l'autorizzazione alla sostituzione...

[Pondera]

Hai per caso la revisione hardware A2?
Per loro è più facile la sostituzione. Però passa un mese fra invio e ricevimento e se il problema si ripresentare sono cavoli amari.
Anche sul mio ho avuto una cosa del genere: in particolare se lasciato acceso tutta una notte (ma con nessun client collegato) la mattina successiva non era raggiungibile né da PC né da Android. Poi ho trovato la giusta combinazione di opzioni. Quella in particolare dovrebbe ovviare a semi-incompatibilità del genere. Poi abbassiamo al minimo il periodo di rinnovo così se ci sono eventuali problemi si riscontrano subito senza aspettare 7 giorni (10080 minuti).
Magari controlliamo questa cosa insieme prima di spedirlo.
Facci sapere!

[andyonos]

la versione è A1
Ho dovuto sostituire per problemi audio la cam DCS-5010L e ci hanno impiegato oltre 2 settimane
Ma cosa significa il periodo di rinnovo (credo tu ti riferisca al tempo DHCP)? ogni 60 minuti si riconnette ai dispositivi? (scusa la mia ignoranza)
Ho comprato questo router perchè il vecchio DIR-868L dopo qualche ora di inutilizzo perdeva il collegamento con il mio provider... (non era più in garanzia) Se dovessi restituire questo nuovo cosa uso?
Ultimamente solo problemi con Dlink!!! mi sto stufando