DIR-825 Router Wireless N Quadband

[wawacco]

- Il comportamento delle reti wireless sembrerebbe anomalo rispetto al firmware 2.01 EU: Sui 5 Ghz (con DWA-160) se impostato sui 20 Mhz consente connessioni stabili a 130 Mbit; se impostato su Auto 20\40 Mhz la connessione cala a 108 Mbit nelle stesse condizioni (con il firmware 2.01EU era oltre 260 Mbit).
Sui 2.4 Ghz sembrerebbe tutto a posto, dato che la DWA-140 si connette a 243 Mbit.

Senz'altro questa è la cosa più "rilevante" in termini di "stranezze", purtroppo dovrò comunque aggiornarlo perchè avendo l'HAG di fastweb non posso fare altrimenti  . Una domanda (stupida  ): Ma tra il firmware pubblicato da poco sul sito d-link e quello preso dall'ftp tedesco c'è qualche differenza ?

[Carciofone]

No, sono perfettamente uguali.
In questo istante la scheda wireless si connette sui 5 Ghz a 162 Mbit, il che sembrerebbe indicare che la connessione avviene effettivamente a 40 Mhz, avendo superato la soglia del 130\150 Mbit, ma in genere è fissa sui 108.

[wawacco]

Grazie  , strano il comportamento, prima comunque stavo leggendo su un forum USA che qualcuno aveva problemi con il 2.02NA, ovvero settava sempre sui 5 Ghz Auto 20/40 Mhz e automaticamente il router lo riportava a 20 Mhz O_o, non so se le cose posson essere correlate bho..

[Carciofone]

Grazie  , strano il comportamento, prima comunque stavo leggendo su un forum USA che qualcuno aveva problemi con il 2.02NA, ovvero settava sempre sui 5 Ghz Auto 20/40 Mhz e automaticamente il router lo riportava a 20 Mhz O_o, non so se le cose posson essere correlate bho..

Eh sì, direi di sì, sembra esattamente quello che riscontro io. Però a volte su 20\40 5Ghz arriva anche a 260 Mbit (ma normalmente è 108Mbit), mentre non è così se metto 20 che va fisso a 130.

[wawacco]

Arrivato stamani il router + DWA-160, uppato a 2.02 e ho fatto qualche test, allora in primis il problema esposto da carciofone lo riscontro al contrario, a 2,4Ghz và peggio che a 5Ghz (saranno le interferenze  ) ma in generale secondo me la soluzione è piuttosto semplice, come dice Alby il segnale è diminuito   e di conseguenza a una distanza effimera (3-4 metri) con 1 sola parete (NON in cemento armato anzi piuttosto "frolla) prendo 3 tacche su 5 (corrispondenti sul router al 60-70% di segnale O_o) e la situazione è questa:

2.4 Ghz = Impostato 20/40, protezione wpa 2, 802.11N only, da 108 a 130 Mbps e 3MB/s nel trasferimento file MAI di più, ho provato anche a installare la chiavetta su un pc a 1 metro dal router, 5 tacche ma 130Mbps fisso comunque O_O, sul forum d-link consigliano di seguire tutti questi punti:

Codice Seleziona Espandi

300Mbps Connection Requirements! Please Read!
« on: December 30, 2008, 09:08:54 AM »

--------------------------------------------------------------------------------

To have your Draft N wireless network connect at 300Mbps as it should, ensure that the following requirements are met.


1) The router and adapter are both D-Link 802.11N products and are using the latest firmeware/drivers. Ensure that the 802.11 Mode of the router has a 802.11N mode selected. Also if you have issues with mixed mode, try locking the 802.11Mode to either 802.11N Only or 802.11G/N.

2) If you are using encryption the router must be configured to use AES cipher. In some firmware versions/models, the only way to get the AES cipher is to run WPA2. If you can not select the Cipher, selecting WPA2 only will force this cipher type.

3) The channel width needs to be set to 20/40Auto, if it is not, the adapter will report a connection speed of 130Mbps. This is a feature that was added for compatibility with Intel 802.11N adapters, as they only operate on a channel width of 20.

D-Link reccomends that you use the D-Link Wireless utility, however the Windows Zero Config will also work.

Assuming you have met all of these conditions, you should see a 300Mbps connection speed with either the D-Link Utility or WZC.

Note: Not all Intel adapters are the same as D-Links' N line. Some Intel adapters do not support the broader 40 Channel Width option. This (by design) limits their connection speed to 130. Check the specifications of your Intel adapter to ensure that it is capable of bonding on the 40Mhz range to achieve the full 300Mbps.
ma non và comunque, fisso sempre sui 130 Mbps, velocità tra un pc (gigaethernet) e l'altro(quello con la dwa-160 a 1 metro di distanza) provando il trasferimento di un mkv è in media di 7-8 MB/s.

5 Ghz = Impostato 20/40, protezione wpa 2, 802.11N e 802.11A, nell'altra stanza (ricordo muro + 3-4 metri) si sta sui 130Mbps e 4MB/s nel trasferimento file, ma mettendo una prolunga usb ho avvicinato la chiavetta a 1 metro e mezzo dal router, risultato = 24x Mbps, provata poi sul pc a 1 metro di distanza = 300 Mbps e 5 tacche, la velocità media tra i pc di cui sopra con il solito mkv è intorno ai 11,5 MB/s in questo caso.

Questa è la situazione. Diciamo che sono soddisfatto in parte, in confronto al vecchio netgear wgt624 da 30 euro il boost c'è stato (passavo file a 2MB/s) ma neanche più di tanto, mi aspettavo almeno di toccare la velocità di un ethernet 100 nella stanza più lontana, tra l'altro pensavo che a 1 metro ci fossero valori più alti di 8 o 11 Mb/s passando file, ma probabilmente son io che mi aspetto sempre troppo..

[Carciofone]

Aggiornati i link in prima pagina relativi alle nuove versioni di Shareport utility per Windows e MAC con il rinvio all'apposita discussione.

[Carciofone]

Nuovo firmware beta 2.05WWB01 per DIR-825: DOWNLOAD
Changelog:

Codice Seleziona Espandi

DIR-825WWB1 Firmware Release Note  

Firmware: v2.05WW Build: 01 Beta01
Hardware: B1
Date: 30, Sep, 2010

Firmware Version: ver2.05WWb01Beta01
Firmware Date: Thu, 30, Sep, 2010
hecksum: 0x07E456B2
Problems Resolved & Enhancements:
1. Fixed DIR-825_B1_v2.01WWB07Beta01-Multicast issue with enabled NETWORK FILTER.


Firmware: v2.05WW Build: 01
Hardware: B1
Date: 29, Sep, 2010

Firmware Version: ver2.05WWb01
Firmware Date: Wed, 29, Sep, 2010
checksum: 0x07E52ABA
Problems Resolved & Enhancements:
1. Fixed WEP Key only support one key.
2. Enable option 33/121 for Russia
3. Support DWM-152/156 A3
4. Support IPv6 to V1.12R. (Do not support IPv6 firewall).


Firmware: v2.04WW Build: 01 Beta01
Hardware: B1
Date: 23, Sep, 2010

Firmware Version: ver2.04WWb01Beta01
Firmware Date: Thu, 23, Sep, 2010
checksum: 0x07E4A39B
Problems Resolved & Enhancements:
1. Fixed that beacon stuck caused by some STA can send action frame to inform AP to switch to HT20 which is not necessary.


Firmware: v2.04WW Build: 01
Hardware: B1
Date: 03, Sep, 2010

Firmware Version: ver2.04WWb01
Firmware Date: Fri, 03, Sep, 2010
checksum: 0x07E42241
Problems Resolved & Enhancements:
1. Revised firmware version to 2.04


Firmware: v2.02WW Build: 14
Hardware: B1
Date: 26, Aug, 2010

Firmware Version: ver2.02WWb14
Firmware Date: Thu, 26, Aug, 2010
CheckSum: 0x07E250B7
Problems Resolved & Enhancements:
1. Fixed when user only change Lan settings, pop change IP address message.
2. Support DLink DNSSEC Spec.


Firmware: v2.02WW Build: 13
Hardware: B1
Date: 5, Jul, 2010

Firmware Version: ver2.02WWb13
Firmware Date: Mon, 5, Jul, 2010
CheckSum: 0x07E34E5C
Problems Resolved & Enhancements:
1.Fixed: When we change the DUT's password and save it.It can't back to login GUI page.
2.Fixed: [Status - Devices Info - LAN Computers] WLAN PCs' information does not be displayed. Fixed display WAN site network IP address at LAN computer list.

Firmware: v2.02WW Build: 12
Hardware: B1
Date: 2, Jul, 2010

Firmware Version: ver2.02WWb12
Firmware Date: Fri, 2, Jul, 2010
CheckSum: 0x07E30502
Problems Resolved & Enhancements:
1. Fixed: [WebUI] It is incorrect. Please refer to the screenshot attached.(IE7)
2. Fixed: When we change the DUT's password and save it.It can't back to login GUI page.
3. Fixed: [Status - Devices Info - LAN Computers] WLAN PCs' information does not be displayed.

Firmware: v2.02WW Build: 11
Hardware: B1
Date: 17, Jun, 2010

Firmware Version: ver2.02WWb11
Firmware Date: Thu, 17, Jun, 2010
CheckSum: 0x07E37801
Problems Resolved & Enhancements:
1. Verify: IPv6 DHCPv6 mode isse.
2. Fixed: When the My USB type is: "WCN Configuration" and "3G USB Adapter", the "Shareport for guest zone" should NOT display.
3. Fixed: When user input Invalids IP Address in Virtual Server page as below. (Invalids IP: 0.0.0.0 and 255.255.255.255)
4. Fixed: Russia PPPoE  error message issue.
5. Verify: [WebUI] It is incorrect. Please refer to the screenshot attached.(IE7)


Firmware: v2.02WW Build: 10
Hardware: B1
Date: 3, Jun, 2010

Firmware Version: ver2.02WWb10
Firmware Date: Wed, 03, Jun, 2010
CheckSum: 0x07E259D6
Problems Resolved & Enhancements:
1. Verify PureNetwork HNAP testing.


Firmware: v2.02WW Build: 09
Hardware: B1
Date: 24, May, 2010

Firmware Version: ver2.02WWb09
Firmware Date: Mon, 24, May, 2010
CheckSum: 0x07F60CCB        
Problems Resolved & Enhancements:
1. Removed USB 3G phone option.
2. Fixed 3G USB Adapter function can't work.


Firmware: v2.02WW Build: 08
Hardware: B1
Date: 21, Apr, 2010

Firmware Version: ver2.02WWb08
Firmware Date: Wed, 21, Apr, 2010
CheckSum: 0x07F5670F        
Problems Resolved & Enhancements:
1. Fixed Status-IPv6 page – LAN Computer IPv6 Address display issue
2. Fixed LAN PC in IPv6 PPPoE mode can't access to IPv6 network.
3. Fixed IPv6 PPPoE page – LAN IPv6 Address field MUST NOT display 6to4 IPv6 Address by default
4. Fixed LAN IPv6 Address field MUST NOT allow user set 6to4 address
5. Fixed IPv6 PPPoE reconnect function – each connection mode MUST be work
6. Fixed Remote manage function MUST work for WAN IPv6 Address
7. Fixed 6to4 relay field MUST allow set IPv4 address and Domain Name
8. Fixed Subnet Prefix Length SHOULD verify more types. Example, /8, /16, /32, /48, /64, /72, /127, IPv6 Address SHOULD verify more types.
9. Updated firmware version to 2.02


Firmware: v2.01WW Build: 07Beta02
Hardware: B1
Date: 19, Apr, 2010

Firmware Version: ver2.01WWb07Beta02
Firmware Date: Mon, 19, Apr, 2010
CheckSum: 0x07F6A550        
Problems Resolved & Enhancements:
1. Fixed when user doesn't set schedule page and link to other option webpage, then pop warning message.
2. Fixed Qos(mbandwidth) send broadcast ICMP Echo Request.


Firmware: v2.01WW Build: 07Beta01
Hardware: B1
Date: 14, Apr, 2010

Firmware Version: ver2.01WWb07Beta01
Firmware Date: Wed, 14, Apr, 2010
CheckSum: 0x07F6596F        
Problems Resolved & Enhancements:
1. Fixed when user doesn't set schedule page and link to other option webpage, then pop warning message.
2. Fixed when setting wireless schedule, if schedule time has not arrived yet, the wireless radio should be off, but it's not.
3. Ipv6 clients can't be shown in list of status.
4. 6in4 with dhcp-pd mode ,client pc can't get IP from stateful lan mode.
5. When assign ipv6 over ipv4 mode dns should in dynamic mode as default mode.(ipv6_6in4_dns_enable=0)
6. Fixed log texts is too long to break table.
7. Fixed when 3G USB + PPTP Pass Through, PPTP Pass Through easily disconnect.


Firmware: v2.01WW Build: 07
Hardware: B1
Date: 31, Mar, 2010

Firmware Version: ver2.01WWb07
Firmware Date: Mar, 31, Mar, 2010
CheckSum: 0x07F552EF        
Problems Resolved & Enhancements:
1. Wireless Function. (Performance, IOT, Reliability, WPS)
2. DDNS (DynDNS) Function.
3. Enable check IPv6 DNS address.
4. Set IPv6_pppoe_mtu default value is 1492.
5. Disable check ipv6 wan proto on wan page.
6. Fixed PPPoEv6 Static IP is fail.
7. Fixed IPv6 6in4 don't work.
8. Fixed IPv6 Network Status: Modify the text "connect" to "connected".
9. Fixed when apply IPv6 6in4 and IPv6 6to4 will display warning message.
10. Fixed correcting the DHCP Reservation List of Expires misspelling, it should be "Never".
11. Removed if DHCP-PD is enabled, DNS server must be obtained automatically under this mode.
12. Merge 12/24 time format issue.


Firmware: v2.01WW Build: 06Beta02
Hardware: B1
Date: 22, Mar, 2010

Firmware Version: ver2.01WWb06Beta02
Firmware Date: Mon, 22, Mar, 2010
CheckSum: 0x07F4E9C7        
Problems Resolved & Enhancements:
1. Fixed Home Network Administration Protocol (HNAP) vulnerabilities.


Firmware: v2.01WW Build: 06Beta01
Hardware: B1
Date: 02, Mar, 2010

Firmware Version: ver2.01WWb06Beta01
Firmware Date: Tue, 02, Mar, 2010
CheckSum: 0x07F519A4        
   
Problems Resolved & Enhancements:
1. Fixed IOT issue with Singapore iBurst RJ45 modem in 10Half mode.

Firmware: v2.01WW Build: 06
Hardware: B1
Date: 04, Feb, 2010

Firmware Version: ver2.01WWb06
Firmware Date: Thu, 04, Feb, 2010
CheckSum: 0x07F42FBB        
   
Problems Resolved & Enhancements:
1.    Added 404 error spec v1.02.
2.    Support httpd ipv6.
3.    Support LLMNR support.
4.    Add WAN 3G phone option.
5.    Fixed doesn't check WAN Physical netmask, gateway IP of Russia PPPoE.
6.    Fixed doesn't check PPTP netmask IP address of Static Russia PPTP.
7.    Add 12/24 time format on schedule.
8.    Fixed 5GHz ? SSID is [dlink_media"'~!@#$%^&*'`~!@#$%` ], then Wireless Network Name of wireless network setting 5GHz is empty.
9.    Fixed 2.4G / 5G wireless bssid of main & guest_zone are the same.

Firmware: v2.01WW Build: 05
Hardware: B1
Date: 28, Jan, 2010

Firmware Version: ver2.01WWb05
Firmware Date: Thu, 28, Jan, 2010
CheckSum: 0x07F4F63A                                
   
Problems Resolved & Enhancements:
1. Fixed #19: Website Filter function check warning message display incorrect language in Espanol.
2. Fixed #10: 5G Guest Zone will not display WPA-Enterprise settings.
3. Fixed #2: No check WAN Physical settings of Russia PPPoE.
4. Fixed #1: No check PPTP Gateway IP address of Static Russia PPTP.
5. Fixed #11: Change WAN Type settings cause Router reboot.
6. Fixed #7: Login account issue.
7. Added a feature for dlink 404 error spec v1.01.

Firmware: v2.01WW Build: 04Beta01
Hardware: B1
Date: 20, Jan, 2010

Firmware Version: ver2.01WWb04Beta01
Firmware Date: Wed, 20, Jan, 2010
CheckSum: 0x07F4DFF9                                
   
Problems Resolved & Enhancements:
1.    Fixed tcp port scan fail in port 0 and 1.


Firmware: v2.01WW Build: 04
Hardware: B1
Date: 06, Jan, 2010

Firmware Version: ver2.01WWb04
Firmware Date: Wed, 06, Jan, 2010
CheckSum: 0x07F36607                                
   
Problems Resolved & Enhancements:
1. Fixed PPPoE re-connect issue.
2. Fixed BT issue.

Firmware: v2.01WW Build: 03Beta02
Hardware: B1
Date: 10, Dec, 2009

Firmware Version: ver2.01WWb03beta02
Firmware Date: Thu, 10, Dec, 2009
CheckSum: 0x07F4F4CC                                
   
Problems Resolved & Enhancements:
1. Updated displaying 5 GHz wireless client list by xml.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed DIR-825_A1_v2.01-DCS-5220 and DCS-2120 failed to connect to DIR-825 VIA wireless connection.

Firmware: v2.01WW Build: 03Beta01
Date: 1, Dec, 2009

Firmware Version: ver2.01WWb03beta01
Firmware Date: Tue, 1, Dec, 2009
CheckSum: 0x07F26F70                                    
   
Problems Resolved & Enhancements:
1. Login privilege will be changed by another user login.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed Channel Width 2040 won't saved when configured to 802.11n (Only on 5 GHz)
4. Fixed when add new schedule, wireless will use the newest schedule rule.
5. Fixed  Transmit power function does not work for 5 GHz.

Firmware: v2.01WW Build: 03
Date: 20, Nov, 2009

Firmware Version: ver2.01WWb03
Firmware Date: Fri, 20, Nov, 2009
CheckSum: 0x07F30704                                    
   
Problems Resolved & Enhancements:
1. Fixed Transmit power function does not work.
2. Fixed Channel Width 2040 won't saved when configured to 802.11n (Only on 5GHz)


Firmware: v2.01WW Build: 02
Hardware: B1
Date: 4, Nov, 2009

Firmware Version: ver2.01WWb02
Firmware Date: Wed, 4, Nov, 2009
   
Problems Resolved & Enhancements:
1. Support FQDN function.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed when use "user" account, it still can select language.

Firmware: v2.01WW Build: 01
Hardware: B1
Date: 20, Oct, 2009

Firmware Version: ver2.01WWb01
Firmware Date: Tue, 20, Oct, 2009
CheckSum: 0x07F313C9                                        
   
Problems Resolved & Enhancements:

1. Update Kcode module.
2. Support E220, DWA-152/156
3. DIR-825_B1_v2.00b12-May be flood issue.
4. Fixed Previous configured Port range is still valid to protocol of "Any".
5. Fixed when change computer name in DHCP reservation will occur error.
6. Fixed QoS priority range is 1 to 8, but the Qos help description page is 1~255.
7. Fixed No priority field on Status- Internet Sessions page for confirm Qos setting s priority.
8. Fixed when enable 3G USB adapter function, it should not access Qos Engine and Routing function pages.(Follow Ubicom)
9. Fixed QOS: Message wording error when the end port range value less than start port range in remote port range.
10. Fixed Access Control doesn't check rule name duplicate.( Protocol or Port duplicate follow Ubicom when Protocol="Any")
11. Fixed Behavior is different for IPv4 & IPv6 PING test.
12. Fixed https://aaa.bbb.ccc becomes https:/ after clicking save settings.
13. Fixed Set NetBIOS Scope to "abc,123", setting CAN be saved but the announced NetBIOS scope becomes "abc".
14. GUI admin/user behaviors. When use "user" account login, then web pages should be gray.
15. GUI Login Fail Alert Message for Dlink model (follow UbiCom)
16. Fixed Status->Device Info Page issue:
    Do not allow users to press the "connect" or "DHCP Renew" button after PPPoE/PPTP/L2TP/DHCP connection, and press the "disconnect" or " DHCP Release" button after PPPoE/PPTP/L2TP/DHCP disconnection.
17. Wireless domain for Russia: Modify Russia 5GHz channel list for Dlink Spec.
18. Fixed when change Router LAN IP and add DHCP reservation at the same time, the DHCP reservation rules can't be saved.
19. Fixed schedules rule can not be edit when the rule is used.
20. Fixed Inbound filter rule in use can not be edited.
21. Fixed website filtering rules do not work if the website URL/Domain is prefixed "http://" .Prefixed rules will disappear.
22. Fixed MAC address starting with 08:00:46:EE:D1:C8 won't be accepted. (MAC can not accept 08 at beginning).
23. Firmware version is 2.01WW
24. Disable graph_auth_enable in default.
                   
=========================================================================
Firmware: v2.00WW Build: 12
Hardware: B1
Date: 15, May, 2009

Firmware Version: ver2.00WWb12
Firmware Date: Fri, 15, May, 2009
CheckSum: 0x07F0EA2E    
                                       
   
Problems Resolved & Enhancements:

1.Fixed TSD#38:The "Server name/IP" field for PPTP/L2TP and Russia PPTP/L2TP should avoid user to input illegal IP. Only Russia PPTP no check field.
2.Fixed TSD#35:When Enable "Turn MAC Filtering ON and ALLOW computers listed to access the network" function and no input any MAC Address rule, it should appear warning message.
3.Fixed TSD#34:Help page don't need "BigPond Connection" description.
4.Fixed TSD#33:Help Page no have "Advanced DNS service" description.
5.Fixed TSD#32:Help Page does not have "Russia PPTP", "Russia PPPoE" and "3G USB Adapter" descriptions and titles. But no Russia PPTP/PPPoE Internet page help texts. Need PM to provide.
6.Close TSD#31:no texts file.Help Page no have "ROUTING" and "IPv6" descriptions and Hyper-Link Title. Need PM to provide.
7.Fixed TSD#30:Help Page no have "USB SETTINGS" description and Hyper-Link Title.
8.Fixed TSD#14:USB Settings Language description issue.
9.Add HTTPS option.
10.Hide Advanced DNS Option.

=========================================================================

Firmware: v2.00WW Build: 11
Hardware: B1
Date: 7, May, 2009

Firmware Version: ver2.00WWb11
Firmware Date: Thu, 7, May, 2009
CheckSum: 0x07F18EA2    
                                       
   
Problems Resolved & Enhancements:
1. Modify CONFIG_AG7100_LEN_PER_TX_DS=512
2. Support Mac Safari can display autograph pictures.
3. Support Advanced DNS.
4. Fixed the Time zone incorrect for Newfoundland that should be GMT -03:30
5. Support Schedule cannot over 24HR issue.

=========================================================================

Firmware: v2.00WW Build: 10
Hardware: B1
Date: 27, Apr, 2009

Firmware Version: ver2.00WWb10
Firmware Date: Mon, 27, Apr, 2009
CheckSum: 0x07F0BC5E    
                                       
   
Problems Resolved & Enhancements:
1. Fixed ISP's name issue in WAN 3G mode settings page, ChunghuaChunghwa.
2. Fixed BT issue.
3. Fixed igmp snooping.
=========================================================================

Firmware: v2.00WW Build: 09
Hardware: B1
Date: 2, Apr, 2009

Firmware Version: ver2.00WWb09
Firmware Date: Thu, 2, Apr, 2009
CheckSum: 0x7F3E8ED    
                                       
   
Problems Resolved & Enhancements:
1. Fixed Wireless client site survey will get none security when router set Channel Width auto(20/40) in wpa2-AES and WPS not disable..
2. Fixed Setting EAP does not warning messenger when WPS enable.

=========================================================================
Firmware: v2.00WW Build: 08
Hardware: B1
Date: 2, Apr, 2009

Firmware Version: ver2.00WWb08
Firmware Date: Thu, 2, Apr, 2009
CheckSum: 0x7F3CB03    
                                       
   
Problems Resolved & Enhancements:
1. Fixed #No.16- Network Filter warning message issue.
2. Fixed #No.11- password setting of WAN wizard can't keep issue.
3. Fixed #No.15 - When set QoS Priority over 1~ 8 ranges, and then click "Save Settings" button. It will appear the warning message, but click "OK" button that it change to saving windows page.
4. Fixed #No.20- Incorrect warning message when login.
5. Fixed #No.23- Email Now function fail on Language Espanol.
6. Fixed #No.6 - When DUT Internet type is Static IP, the pull-down menu display error.

=========================================================================

Firmware: v2.00WW Build: 07
Hardware: B1
Date: 27, Mar, 2009

Firmware Version: ver2.00WWb07
Firmware Date: Fri, 27, Mar, 2009
CheckSum: 0x7F315F8        
                                       
   
Problems Resolved & Enhancements:
1. Fixed #No.24- Firmware Help page error.
2. Verify #No.23- Email Now function fail on Language Espanol.
3. Verify #No.22- IPv6 - DHCPv6 Stateful failed at PPPoE Mode.
4. Verify #No.21- IPv6 Auto configuration menu error of 6 in 4 Tunnel Mode.
5. Verify #No.20- Incorrect warning message when login.
6. Fixed #No.18- 5G Guest WEP-128 bit Key issue
7. Fixed #No.17 - Status button display error
8. Fixed #No.15 - When set QoS Priority over 1~ 8 ranges, and then click "Save Settings" button. It will appear the warning message, but click "OK" button that it change to saving windows page.
9. Fixed #No.10 - Static IP settings of WAN wizard display location issue.
10. Verify #No.6 - When DUT Internet type is Static IP, the pull-down menu display error.
11. Verify #No.5 - Pop-up a Espanol warning message as below in English UI when the Virtural Server Port Setting conflict with Port Forwarding rules.
12.Fixed #No.2 - Change option to either one in drop-down menu then click save setting will occur a "Not thing changed" warning message.  If click "Yes" to continue, settings are saved and working properly.
13. Verify #No.1 - 3G USB Adaptor display error.
14. Fixed #No.13 - PPPoE service name cause connection to Internet failed.
15. Fixed #No.12 - PPPoE service name can't display.
16. Support igmp snoopy function.
17. Modify the count down time is 40s when setting wan page.
=========================================================================
Firmware: v2.00WW Build: 06
Hardware: B1
Date: 23, Mar, 2009

Firmware Version: ver2.00WWb06
Firmware Date: Mon, 23, Mar, 2009
CheckSum: 0x7DFE535            
                                       
   
Problems Resolved & Enhancements:
1. Removed the WPS warning message when setting WPA-TKIP/AES.

=========================================================================

Firmware: v2.00WW Build: 05
Hardware: B1
Date: 23, Mar, 2009

Firmware Version: ver2.00WWb05
Firmware Date: Mon, 23, Mar, 2009
CheckSum: 0x7DFA8DB            
                                       
   
Problems Resolved & Enhancements:
1. Removed the WPS warning message when setting WPA-TKIP/AES.
2. Fixed USB 3G drop menu error.
3. Fixed Russia PPTP can't save.
4. Fixed Static Routing doesn't have wan physical.
5. Fixed Login pop warning message always display.
6. Fixed wording error on 802.11 n only.
7. Fixed the NAME of LAN Computers sometimes display empty on device information.
=========================================================================

Firmware: v2.00WW Build: 04
Hardware: B1
Date: 16, Mar, 2009

Firmware Version: ver2.00WWb04
Firmware Date: Mon, 16, Mar, 2009
CheckSum: 0x7E04CD4            
                                       
   
Problems Resolved & Enhancements:
1. Fixed sometimes on different config pages, the frames are a little bit too wide.
2. Fixed The DIR-825 shows its time as "NaN" or the time will not be changed regarding the set time zone, the DIR-825 shows the NTP time.
3. Fixed On this config page in wireless wizard there is a page error.
4. Fixed there is a page error when user try to change the Cipher Type to "TKIP and AES" on wireless setting.
5. Fixed when I configure an Access control rule there are three not named buttons.
6. Fixed WAN Port Speed to Auto 10/100/1000Mbps.
7. Remove "Transmission Rate" information of "Wireless" support page
8. Fixed Floating message error of "Schedule Rules List"(Both "Edit" and "Delete" are incorrect).
9. Fixed Button name error of Access Control.
10. Fixed UI message error of "Load configuration File" (Both messages for "Failed" and "Success" loading are disappeared.)
11. Remove GuestWPS, WISH option on st_device.asp.
12. Add USB 3G country and ISP drop menu.        
13. Fixed Configure the Router LAN IP to different IP subnet will not change the "DHCP IP range" IP subnet.
14. Fixed Russia mode when PPP/PPPoE does not connect to server, the status page should display physical IP.    
Detail          
15. Fixed status->routing show up disabled static routing rules.
16. Fixed: 802.11n only not support security WEP or TKIP
17. Fixed: 5G WEP/GuestZone default key display error.

=========================================================================
Firmware: v2.00WW Build: 03
Hardware: B1
Date: 26, Feb, 2009

Firmware Version: ver2.00WWb03
Firmware Date: Thu, 26, Feb, 2009
CheckSum: 0x7DF5C8E            
                                       
   
Problems Resolved & Enhancements:

1. Fixed firmware query cannot download.
2. Removed the empty option on Web UI 5G channel list.
3. Add shareport option on usb setting.
4. Please verify Widget and Gadget.

=========================================================================

Firmware: v2.00WW Build: 02
Hardware: B1
Date: 26, Feb, 2009

Firmware Version: ver2.00WWb02
Firmware Date: Thu, 26, Feb, 2009
CheckSum: 0x7DD8416        
                                       
   
Problems Resolved & Enhancements:

1. Fixed firmware query cannot download.
2. Fixed 3G warning message error.
3. Fixed change language error on status page.
4. Fixed DDNS cannot save Server Address.
5. Fixed language list error on login page.
6. Fixed some web pages display error when change language.
7. Fixed Russia mode when PPP/PPPoE does not connect to server, the status page should display physical IP.
8. Please verify Widget and Gadget.

=========================================================================

Firmware: v2.00WW Build: 01
Hardware: B1
Date: 20, Feb, 2009

Firmware Version: ver2.00EUb02
Firmware Date: Fri, 20, Feb, 2009
CheckSum: 0x7DDEF46

Problems Resolved & Enhancements:

1.First Release.


[sam81]

Nuovo firmware beta 2.05WWB01 per DIR-825: DOWNLOAD
Changelog:

Codice Seleziona Espandi

DIR-825WWB1 Firmware Release Note  

Firmware: v2.05WW Build: 01 Beta01
Hardware: B1
Date: 30, Sep, 2010

Firmware Version: ver2.05WWb01Beta01
Firmware Date: Thu, 30, Sep, 2010
hecksum: 0x07E456B2
Problems Resolved & Enhancements:
1. Fixed DIR-825_B1_v2.01WWB07Beta01-Multicast issue with enabled NETWORK FILTER.


Firmware: v2.05WW Build: 01
Hardware: B1
Date: 29, Sep, 2010

Firmware Version: ver2.05WWb01
Firmware Date: Wed, 29, Sep, 2010
checksum: 0x07E52ABA
Problems Resolved & Enhancements:
1. Fixed WEP Key only support one key.
2. Enable option 33/121 for Russia
3. Support DWM-152/156 A3
4. Support IPv6 to V1.12R. (Do not support IPv6 firewall).


Firmware: v2.04WW Build: 01 Beta01
Hardware: B1
Date: 23, Sep, 2010

Firmware Version: ver2.04WWb01Beta01
Firmware Date: Thu, 23, Sep, 2010
checksum: 0x07E4A39B
Problems Resolved & Enhancements:
1. Fixed that beacon stuck caused by some STA can send action frame to inform AP to switch to HT20 which is not necessary.


Firmware: v2.04WW Build: 01
Hardware: B1
Date: 03, Sep, 2010

Firmware Version: ver2.04WWb01
Firmware Date: Fri, 03, Sep, 2010
checksum: 0x07E42241
Problems Resolved & Enhancements:
1. Revised firmware version to 2.04


Firmware: v2.02WW Build: 14
Hardware: B1
Date: 26, Aug, 2010

Firmware Version: ver2.02WWb14
Firmware Date: Thu, 26, Aug, 2010
CheckSum: 0x07E250B7
Problems Resolved & Enhancements:
1. Fixed when user only change Lan settings, pop change IP address message.
2. Support DLink DNSSEC Spec.


Firmware: v2.02WW Build: 13
Hardware: B1
Date: 5, Jul, 2010

Firmware Version: ver2.02WWb13
Firmware Date: Mon, 5, Jul, 2010
CheckSum: 0x07E34E5C
Problems Resolved & Enhancements:
1.Fixed: When we change the DUT's password and save it.It can't back to login GUI page.
2.Fixed: [Status - Devices Info - LAN Computers] WLAN PCs' information does not be displayed. Fixed display WAN site network IP address at LAN computer list.

Firmware: v2.02WW Build: 12
Hardware: B1
Date: 2, Jul, 2010

Firmware Version: ver2.02WWb12
Firmware Date: Fri, 2, Jul, 2010
CheckSum: 0x07E30502
Problems Resolved & Enhancements:
1. Fixed: [WebUI] It is incorrect. Please refer to the screenshot attached.(IE7)
2. Fixed: When we change the DUT's password and save it.It can't back to login GUI page.
3. Fixed: [Status - Devices Info - LAN Computers] WLAN PCs' information does not be displayed.

Firmware: v2.02WW Build: 11
Hardware: B1
Date: 17, Jun, 2010

Firmware Version: ver2.02WWb11
Firmware Date: Thu, 17, Jun, 2010
CheckSum: 0x07E37801
Problems Resolved & Enhancements:
1. Verify: IPv6 DHCPv6 mode isse.
2. Fixed: When the My USB type is: "WCN Configuration" and "3G USB Adapter", the "Shareport for guest zone" should NOT display.
3. Fixed: When user input Invalids IP Address in Virtual Server page as below. (Invalids IP: 0.0.0.0 and 255.255.255.255)
4. Fixed: Russia PPPoE  error message issue.
5. Verify: [WebUI] It is incorrect. Please refer to the screenshot attached.(IE7)


Firmware: v2.02WW Build: 10
Hardware: B1
Date: 3, Jun, 2010

Firmware Version: ver2.02WWb10
Firmware Date: Wed, 03, Jun, 2010
CheckSum: 0x07E259D6
Problems Resolved & Enhancements:
1. Verify PureNetwork HNAP testing.


Firmware: v2.02WW Build: 09
Hardware: B1
Date: 24, May, 2010

Firmware Version: ver2.02WWb09
Firmware Date: Mon, 24, May, 2010
CheckSum: 0x07F60CCB        
Problems Resolved & Enhancements:
1. Removed USB 3G phone option.
2. Fixed 3G USB Adapter function can't work.


Firmware: v2.02WW Build: 08
Hardware: B1
Date: 21, Apr, 2010

Firmware Version: ver2.02WWb08
Firmware Date: Wed, 21, Apr, 2010
CheckSum: 0x07F5670F        
Problems Resolved & Enhancements:
1. Fixed Status-IPv6 page – LAN Computer IPv6 Address display issue
2. Fixed LAN PC in IPv6 PPPoE mode can't access to IPv6 network.
3. Fixed IPv6 PPPoE page – LAN IPv6 Address field MUST NOT display 6to4 IPv6 Address by default
4. Fixed LAN IPv6 Address field MUST NOT allow user set 6to4 address
5. Fixed IPv6 PPPoE reconnect function – each connection mode MUST be work
6. Fixed Remote manage function MUST work for WAN IPv6 Address
7. Fixed 6to4 relay field MUST allow set IPv4 address and Domain Name
8. Fixed Subnet Prefix Length SHOULD verify more types. Example, /8, /16, /32, /48, /64, /72, /127, IPv6 Address SHOULD verify more types.
9. Updated firmware version to 2.02


Firmware: v2.01WW Build: 07Beta02
Hardware: B1
Date: 19, Apr, 2010

Firmware Version: ver2.01WWb07Beta02
Firmware Date: Mon, 19, Apr, 2010
CheckSum: 0x07F6A550        
Problems Resolved & Enhancements:
1. Fixed when user doesn't set schedule page and link to other option webpage, then pop warning message.
2. Fixed Qos(mbandwidth) send broadcast ICMP Echo Request.


Firmware: v2.01WW Build: 07Beta01
Hardware: B1
Date: 14, Apr, 2010

Firmware Version: ver2.01WWb07Beta01
Firmware Date: Wed, 14, Apr, 2010
CheckSum: 0x07F6596F        
Problems Resolved & Enhancements:
1. Fixed when user doesn't set schedule page and link to other option webpage, then pop warning message.
2. Fixed when setting wireless schedule, if schedule time has not arrived yet, the wireless radio should be off, but it's not.
3. Ipv6 clients can't be shown in list of status.
4. 6in4 with dhcp-pd mode ,client pc can't get IP from stateful lan mode.
5. When assign ipv6 over ipv4 mode dns should in dynamic mode as default mode.(ipv6_6in4_dns_enable=0)
6. Fixed log texts is too long to break table.
7. Fixed when 3G USB + PPTP Pass Through, PPTP Pass Through easily disconnect.


Firmware: v2.01WW Build: 07
Hardware: B1
Date: 31, Mar, 2010

Firmware Version: ver2.01WWb07
Firmware Date: Mar, 31, Mar, 2010
CheckSum: 0x07F552EF        
Problems Resolved & Enhancements:
1. Wireless Function. (Performance, IOT, Reliability, WPS)
2. DDNS (DynDNS) Function.
3. Enable check IPv6 DNS address.
4. Set IPv6_pppoe_mtu default value is 1492.
5. Disable check ipv6 wan proto on wan page.
6. Fixed PPPoEv6 Static IP is fail.
7. Fixed IPv6 6in4 don't work.
8. Fixed IPv6 Network Status: Modify the text "connect" to "connected".
9. Fixed when apply IPv6 6in4 and IPv6 6to4 will display warning message.
10. Fixed correcting the DHCP Reservation List of Expires misspelling, it should be "Never".
11. Removed if DHCP-PD is enabled, DNS server must be obtained automatically under this mode.
12. Merge 12/24 time format issue.


Firmware: v2.01WW Build: 06Beta02
Hardware: B1
Date: 22, Mar, 2010

Firmware Version: ver2.01WWb06Beta02
Firmware Date: Mon, 22, Mar, 2010
CheckSum: 0x07F4E9C7        
Problems Resolved & Enhancements:
1. Fixed Home Network Administration Protocol (HNAP) vulnerabilities.


Firmware: v2.01WW Build: 06Beta01
Hardware: B1
Date: 02, Mar, 2010

Firmware Version: ver2.01WWb06Beta01
Firmware Date: Tue, 02, Mar, 2010
CheckSum: 0x07F519A4        
   
Problems Resolved & Enhancements:
1. Fixed IOT issue with Singapore iBurst RJ45 modem in 10Half mode.

Firmware: v2.01WW Build: 06
Hardware: B1
Date: 04, Feb, 2010

Firmware Version: ver2.01WWb06
Firmware Date: Thu, 04, Feb, 2010
CheckSum: 0x07F42FBB        
   
Problems Resolved & Enhancements:
1.    Added 404 error spec v1.02.
2.    Support httpd ipv6.
3.    Support LLMNR support.
4.    Add WAN 3G phone option.
5.    Fixed doesn't check WAN Physical netmask, gateway IP of Russia PPPoE.
6.    Fixed doesn't check PPTP netmask IP address of Static Russia PPTP.
7.    Add 12/24 time format on schedule.
8.    Fixed 5GHz ? SSID is [dlink_media"'~!@#$%^&*'`~!@#$%` ], then Wireless Network Name of wireless network setting 5GHz is empty.
9.    Fixed 2.4G / 5G wireless bssid of main & guest_zone are the same.

Firmware: v2.01WW Build: 05
Hardware: B1
Date: 28, Jan, 2010

Firmware Version: ver2.01WWb05
Firmware Date: Thu, 28, Jan, 2010
CheckSum: 0x07F4F63A                                
   
Problems Resolved & Enhancements:
1. Fixed #19: Website Filter function check warning message display incorrect language in Espanol.
2. Fixed #10: 5G Guest Zone will not display WPA-Enterprise settings.
3. Fixed #2: No check WAN Physical settings of Russia PPPoE.
4. Fixed #1: No check PPTP Gateway IP address of Static Russia PPTP.
5. Fixed #11: Change WAN Type settings cause Router reboot.
6. Fixed #7: Login account issue.
7. Added a feature for dlink 404 error spec v1.01.

Firmware: v2.01WW Build: 04Beta01
Hardware: B1
Date: 20, Jan, 2010

Firmware Version: ver2.01WWb04Beta01
Firmware Date: Wed, 20, Jan, 2010
CheckSum: 0x07F4DFF9                                
   
Problems Resolved & Enhancements:
1.    Fixed tcp port scan fail in port 0 and 1.


Firmware: v2.01WW Build: 04
Hardware: B1
Date: 06, Jan, 2010

Firmware Version: ver2.01WWb04
Firmware Date: Wed, 06, Jan, 2010
CheckSum: 0x07F36607                                
   
Problems Resolved & Enhancements:
1. Fixed PPPoE re-connect issue.
2. Fixed BT issue.

Firmware: v2.01WW Build: 03Beta02
Hardware: B1
Date: 10, Dec, 2009

Firmware Version: ver2.01WWb03beta02
Firmware Date: Thu, 10, Dec, 2009
CheckSum: 0x07F4F4CC                                
   
Problems Resolved & Enhancements:
1. Updated displaying 5 GHz wireless client list by xml.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed DIR-825_A1_v2.01-DCS-5220 and DCS-2120 failed to connect to DIR-825 VIA wireless connection.

Firmware: v2.01WW Build: 03Beta01
Date: 1, Dec, 2009

Firmware Version: ver2.01WWb03beta01
Firmware Date: Tue, 1, Dec, 2009
CheckSum: 0x07F26F70                                    
   
Problems Resolved & Enhancements:
1. Login privilege will be changed by another user login.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed Channel Width 2040 won't saved when configured to 802.11n (Only on 5 GHz)
4. Fixed when add new schedule, wireless will use the newest schedule rule.
5. Fixed  Transmit power function does not work for 5 GHz.

Firmware: v2.01WW Build: 03
Date: 20, Nov, 2009

Firmware Version: ver2.01WWb03
Firmware Date: Fri, 20, Nov, 2009
CheckSum: 0x07F30704                                    
   
Problems Resolved & Enhancements:
1. Fixed Transmit power function does not work.
2. Fixed Channel Width 2040 won't saved when configured to 802.11n (Only on 5GHz)


Firmware: v2.01WW Build: 02
Hardware: B1
Date: 4, Nov, 2009

Firmware Version: ver2.01WWb02
Firmware Date: Wed, 4, Nov, 2009
   
Problems Resolved & Enhancements:
1. Support FQDN function.
2. Fixed GUI show allowed char for setting of hostname.
3. Fixed when use "user" account, it still can select language.

Firmware: v2.01WW Build: 01
Hardware: B1
Date: 20, Oct, 2009

Firmware Version: ver2.01WWb01
Firmware Date: Tue, 20, Oct, 2009
CheckSum: 0x07F313C9                                        
   
Problems Resolved & Enhancements:

1. Update Kcode module.
2. Support E220, DWA-152/156
3. DIR-825_B1_v2.00b12-May be flood issue.
4. Fixed Previous configured Port range is still valid to protocol of "Any".
5. Fixed when change computer name in DHCP reservation will occur error.
6. Fixed QoS priority range is 1 to 8, but the Qos help description page is 1~255.
7. Fixed No priority field on Status- Internet Sessions page for confirm Qos setting s priority.
8. Fixed when enable 3G USB adapter function, it should not access Qos Engine and Routing function pages.(Follow Ubicom)
9. Fixed QOS: Message wording error when the end port range value less than start port range in remote port range.
10. Fixed Access Control doesn't check rule name duplicate.( Protocol or Port duplicate follow Ubicom when Protocol="Any")
11. Fixed Behavior is different for IPv4 & IPv6 PING test.
12. Fixed https://aaa.bbb.ccc becomes https:/ after clicking save settings.
13. Fixed Set NetBIOS Scope to "abc,123", setting CAN be saved but the announced NetBIOS scope becomes "abc".
14. GUI admin/user behaviors. When use "user" account login, then web pages should be gray.
15. GUI Login Fail Alert Message for Dlink model (follow UbiCom)
16. Fixed Status->Device Info Page issue:
    Do not allow users to press the "connect" or "DHCP Renew" button after PPPoE/PPTP/L2TP/DHCP connection, and press the "disconnect" or " DHCP Release" button after PPPoE/PPTP/L2TP/DHCP disconnection.
17. Wireless domain for Russia: Modify Russia 5GHz channel list for Dlink Spec.
18. Fixed when change Router LAN IP and add DHCP reservation at the same time, the DHCP reservation rules can't be saved.
19. Fixed schedules rule can not be edit when the rule is used.
20. Fixed Inbound filter rule in use can not be edited.
21. Fixed website filtering rules do not work if the website URL/Domain is prefixed "http://" .Prefixed rules will disappear.
22. Fixed MAC address starting with 08:00:46:EE:D1:C8 won't be accepted. (MAC can not accept 08 at beginning).
23. Firmware version is 2.01WW
24. Disable graph_auth_enable in default.
                   
=========================================================================
Firmware: v2.00WW Build: 12
Hardware: B1
Date: 15, May, 2009

Firmware Version: ver2.00WWb12
Firmware Date: Fri, 15, May, 2009
CheckSum: 0x07F0EA2E    
                                       
   
Problems Resolved & Enhancements:

1.Fixed TSD#38:The "Server name/IP" field for PPTP/L2TP and Russia PPTP/L2TP should avoid user to input illegal IP. Only Russia PPTP no check field.
2.Fixed TSD#35:When Enable "Turn MAC Filtering ON and ALLOW computers listed to access the network" function and no input any MAC Address rule, it should appear warning message.
3.Fixed TSD#34:Help page don't need "BigPond Connection" description.
4.Fixed TSD#33:Help Page no have "Advanced DNS service" description.
5.Fixed TSD#32:Help Page does not have "Russia PPTP", "Russia PPPoE" and "3G USB Adapter" descriptions and titles. But no Russia PPTP/PPPoE Internet page help texts. Need PM to provide.
6.Close TSD#31:no texts file.Help Page no have "ROUTING" and "IPv6" descriptions and Hyper-Link Title. Need PM to provide.
7.Fixed TSD#30:Help Page no have "USB SETTINGS" description and Hyper-Link Title.
8.Fixed TSD#14:USB Settings Language description issue.
9.Add HTTPS option.
10.Hide Advanced DNS Option.

=========================================================================

Firmware: v2.00WW Build: 11
Hardware: B1
Date: 7, May, 2009

Firmware Version: ver2.00WWb11
Firmware Date: Thu, 7, May, 2009
CheckSum: 0x07F18EA2    
                                       
   
Problems Resolved & Enhancements:
1. Modify CONFIG_AG7100_LEN_PER_TX_DS=512
2. Support Mac Safari can display autograph pictures.
3. Support Advanced DNS.
4. Fixed the Time zone incorrect for Newfoundland that should be GMT -03:30
5. Support Schedule cannot over 24HR issue.

=========================================================================

Firmware: v2.00WW Build: 10
Hardware: B1
Date: 27, Apr, 2009

Firmware Version: ver2.00WWb10
Firmware Date: Mon, 27, Apr, 2009
CheckSum: 0x07F0BC5E    
                                       
   
Problems Resolved & Enhancements:
1. Fixed ISP's name issue in WAN 3G mode settings page, ChunghuaChunghwa.
2. Fixed BT issue.
3. Fixed igmp snooping.
=========================================================================

Firmware: v2.00WW Build: 09
Hardware: B1
Date: 2, Apr, 2009

Firmware Version: ver2.00WWb09
Firmware Date: Thu, 2, Apr, 2009
CheckSum: 0x7F3E8ED    
                                       
   
Problems Resolved & Enhancements:
1. Fixed Wireless client site survey will get none security when router set Channel Width auto(20/40) in wpa2-AES and WPS not disable..
2. Fixed Setting EAP does not warning messenger when WPS enable.

=========================================================================
Firmware: v2.00WW Build: 08
Hardware: B1
Date: 2, Apr, 2009

Firmware Version: ver2.00WWb08
Firmware Date: Thu, 2, Apr, 2009
CheckSum: 0x7F3CB03    
                                       
   
Problems Resolved & Enhancements:
1. Fixed #No.16- Network Filter warning message issue.
2. Fixed #No.11- password setting of WAN wizard can't keep issue.
3. Fixed #No.15 - When set QoS Priority over 1~ 8 ranges, and then click "Save Settings" button. It will appear the warning message, but click "OK" button that it change to saving windows page.
4. Fixed #No.20- Incorrect warning message when login.
5. Fixed #No.23- Email Now function fail on Language Espanol.
6. Fixed #No.6 - When DUT Internet type is Static IP, the pull-down menu display error.

=========================================================================

Firmware: v2.00WW Build: 07
Hardware: B1
Date: 27, Mar, 2009

Firmware Version: ver2.00WWb07
Firmware Date: Fri, 27, Mar, 2009
CheckSum: 0x7F315F8        
                                       
   
Problems Resolved & Enhancements:
1. Fixed #No.24- Firmware Help page error.
2. Verify #No.23- Email Now function fail on Language Espanol.
3. Verify #No.22- IPv6 - DHCPv6 Stateful failed at PPPoE Mode.
4. Verify #No.21- IPv6 Auto configuration menu error of 6 in 4 Tunnel Mode.
5. Verify #No.20- Incorrect warning message when login.
6. Fixed #No.18- 5G Guest WEP-128 bit Key issue
7. Fixed #No.17 - Status button display error
8. Fixed #No.15 - When set QoS Priority over 1~ 8 ranges, and then click "Save Settings" button. It will appear the warning message, but click "OK" button that it change to saving windows page.
9. Fixed #No.10 - Static IP settings of WAN wizard display location issue.
10. Verify #No.6 - When DUT Internet type is Static IP, the pull-down menu display error.
11. Verify #No.5 - Pop-up a Espanol warning message as below in English UI when the Virtural Server Port Setting conflict with Port Forwarding rules.
12.Fixed #No.2 - Change option to either one in drop-down menu then click save setting will occur a "Not thing changed" warning message.  If click "Yes" to continue, settings are saved and working properly.
13. Verify #No.1 - 3G USB Adaptor display error.
14. Fixed #No.13 - PPPoE service name cause connection to Internet failed.
15. Fixed #No.12 - PPPoE service name can't display.
16. Support igmp snoopy function.
17. Modify the count down time is 40s when setting wan page.
=========================================================================
Firmware: v2.00WW Build: 06
Hardware: B1
Date: 23, Mar, 2009

Firmware Version: ver2.00WWb06
Firmware Date: Mon, 23, Mar, 2009
CheckSum: 0x7DFE535            
                                       
   
Problems Resolved & Enhancements:
1. Removed the WPS warning message when setting WPA-TKIP/AES.

=========================================================================

Firmware: v2.00WW Build: 05
Hardware: B1
Date: 23, Mar, 2009

Firmware Version: ver2.00WWb05
Firmware Date: Mon, 23, Mar, 2009
CheckSum: 0x7DFA8DB            
                                       
   
Problems Resolved & Enhancements:
1. Removed the WPS warning message when setting WPA-TKIP/AES.
2. Fixed USB 3G drop menu error.
3. Fixed Russia PPTP can't save.
4. Fixed Static Routing doesn't have wan physical.
5. Fixed Login pop warning message always display.
6. Fixed wording error on 802.11 n only.
7. Fixed the NAME of LAN Computers sometimes display empty on device information.
=========================================================================

Firmware: v2.00WW Build: 04
Hardware: B1
Date: 16, Mar, 2009

Firmware Version: ver2.00WWb04
Firmware Date: Mon, 16, Mar, 2009
CheckSum: 0x7E04CD4            
                                       
   
Problems Resolved & Enhancements:
1. Fixed sometimes on different config pages, the frames are a little bit too wide.
2. Fixed The DIR-825 shows its time as "NaN" or the time will not be changed regarding the set time zone, the DIR-825 shows the NTP time.
3. Fixed On this config page in wireless wizard there is a page error.
4. Fixed there is a page error when user try to change the Cipher Type to "TKIP and AES" on wireless setting.
5. Fixed when I configure an Access control rule there are three not named buttons.
6. Fixed WAN Port Speed to Auto 10/100/1000Mbps.
7. Remove "Transmission Rate" information of "Wireless" support page
8. Fixed Floating message error of "Schedule Rules List"(Both "Edit" and "Delete" are incorrect).
9. Fixed Button name error of Access Control.
10. Fixed UI message error of "Load configuration File" (Both messages for "Failed" and "Success" loading are disappeared.)
11. Remove GuestWPS, WISH option on st_device.asp.
12. Add USB 3G country and ISP drop menu.        
13. Fixed Configure the Router LAN IP to different IP subnet will not change the "DHCP IP range" IP subnet.
14. Fixed Russia mode when PPP/PPPoE does not connect to server, the status page should display physical IP.    
Detail          
15. Fixed status->routing show up disabled static routing rules.
16. Fixed: 802.11n only not support security WEP or TKIP
17. Fixed: 5G WEP/GuestZone default key display error.

=========================================================================
Firmware: v2.00WW Build: 03
Hardware: B1
Date: 26, Feb, 2009

Firmware Version: ver2.00WWb03
Firmware Date: Thu, 26, Feb, 2009
CheckSum: 0x7DF5C8E            
                                       
   
Problems Resolved & Enhancements:

1. Fixed firmware query cannot download.
2. Removed the empty option on Web UI 5G channel list.
3. Add shareport option on usb setting.
4. Please verify Widget and Gadget.

=========================================================================

Firmware: v2.00WW Build: 02
Hardware: B1
Date: 26, Feb, 2009

Firmware Version: ver2.00WWb02
Firmware Date: Thu, 26, Feb, 2009
CheckSum: 0x7DD8416        
                                       
   
Problems Resolved & Enhancements:

1. Fixed firmware query cannot download.
2. Fixed 3G warning message error.
3. Fixed change language error on status page.
4. Fixed DDNS cannot save Server Address.
5. Fixed language list error on login page.
6. Fixed some web pages display error when change language.
7. Fixed Russia mode when PPP/PPPoE does not connect to server, the status page should display physical IP.
8. Please verify Widget and Gadget.

=========================================================================

Firmware: v2.00WW Build: 01
Hardware: B1
Date: 20, Feb, 2009

Firmware Version: ver2.00EUb02
Firmware Date: Fri, 20, Feb, 2009
CheckSum: 0x7DDEF46

Problems Resolved & Enhancements:

1.First Release.


Salve rieccomi a combattere con il dir 825,
dopo aver tentato con DD-wrt, che devo dire sempre + maturo ma ancora non performante con il wirless su questo router, ho rifleshato tutto
con la 202EUb04 ... e riniziano i dolori ... come detto da altri la wi fi a 2.4 cala di potenza e di prestazioni nominali (a me win si connette max 130 M/b),
ma i problemi non mi sembrano solo questi, riscontro dei buchi di accesso verso internet abbastanza regolari su diversi pc che sono connessi al wi fi.
Visto che il problema è sicuramante FW e non ho fastweb, secondo voi è il caso che faccia il down grade ad una vecchia versione + stabile ?
Oppure mi consigliate la versione 205EUb01?? Qualcuno l'ha provata?
 

[Carciofone]

Potresti fare un test, il changelog promette bene.

[sam81]

Insomma mi devo beccare un'altra 'mucchia' di insulti in famiglia se internet non va!   ..
Va be se ho tempo ci provo  ... altre versioni FW da suggerire?
anche vecchie

[Alby]

He, he, he, magari fallo quando non c'è nessuno a casa ... :-)
Che sappia io non ci sono altri firmware più recenti del 2.05. Anzi, a guardare i changelog in mezzo ce n'è stati una caterba che non si sa dove siano.

[sam81]

Si questa notte alle 3!! A casa mia ha imparato ad usare il computer anche mia madre che ha 50 anni all'inizio pensavo fosse un bene ... ora non ne sono tanto convinto  

io ho cercato in giro altri FW ma non ho trovato nulla ... saranno state tutte versioni non rilasciate, cmq visto il salto secondo me hanno cambiato molte più cose di quelle del log ... faccio il firmerista e sapeste quanti bachi si attappano e non si crivono sulle documentazioni per i clienti!  

[Carciofone]

Sì, inizialmente la connessione avveniva a 300 full anche sui 2.4 Ghz. Forse è un problema dei driver della atheros.

[sam81]

ti ricordi con quale versione FW?

[wawacco]

Io ormai aspetto quella definitiva e sperem che risolvono ! è un po brutto vedere chiavetta e router che si "guardano" e non poter superare certe velocità >_>

[sam81]

Rieccomi
ieri ho caricato la  2.05B01 in versione beta, non ho fatto troppe prove quindi quello che dico prendetelo come prime senzazioni, ho notato una immediata maggiore reattività dell'interfaccia web del router anche tramite wifi, una più efficente e veloce connessione alla rete 2.4 da parte dei pc sia su win sua su Ubuntu metre prima con la  2.02B04 specialmente questa ultima
ci metteva un bel po' a connetersi se ci riusciva, velocità max 130 Mb/s a 2 m dal router, per il problema dei buchi di connessione forse va meglio ma
voglio tenerlo docchio per almano 7 goirni prima di 'parlare'.
Sulla rete a 5 Ghz non ho fatto prove anche perchè per me è totalmante inutile visto che il mio dir 825 è usato i outdor e fra le antenne che sono
dimensionate per reti 2.4 e i muri di casa mia la rilevo con difficoltà e quindi l'ho disattivata.

Cmq devo dire che nonostante HW di questa macchina sia ottimo il FW mi conmincia deludere ... lo danno per wirless N a 300 Mb/s ma mi sembra di aver capito che gli ultimi FW
non sfondano i 130 ... come direbbero a Roma 'è una sola'!
Ma io ricordo che con una vesione FW (quella con cui è arrivato) riuscivo a connetttermi a 300 anche sulla 2.4 ... qualcuno me lo conferma o mi ricordo male?

[Alby]

ti ricordi con quale versione FW?

Penso si trattasse del precedente 2.01B15

[Kjow]

Ciao a tutti, ho un paio di domande:

1) qualcuno ha provato come va il fw 2.05B01(WW) Beta su fastweb? In teoria dovrebbe inglobare le migliorie del 2.02, quindi andare uguale/meglio (salvo altri bug). Chiedo perchè in prima pagina è ancora consigliato il 2.02 per fastweb.

2) che differenza c'è tra WW ed EU? Immagino una cosa del tipo World / Europa, ma in pratica? Si può eventualmente tornare indietro in modo semplice da un WW ad un EU? (mi ricordo che con il dir-655 una volta messo un NA non si poteva tornare all'EU, solo "ultimamente" si era trovata una procedura da seguire...)

Grazie!

[Carciofone]

Io l'ho messo e va discretamente, anche se non sembra aver risolto il problema del wifi 2,4 Ghz a 150 Mbit invece di 300. Però non ho Fastweb, quindi non saprei che dirti.
Io lo proverei senza problemi, perchè i firmware World Wide di solito non hanno mai posto limiti agli aggiornamenti con altri firmware.

[Kjow]

Io l'ho messo e va discretamente, anche se non sembra aver risolto il problema del wifi 2,4 Ghz a 150 Mbit invece di 300. Però non ho Fastweb, quindi non saprei che dirti.
Io lo proverei senza problemi, perchè i firmware World Wide di solito non hanno mai posto limiti agli aggiornamenti con altri firmware.

Ho aggiornato
Sembra tutto in ordine, forse sarà la suggestione, ma sembra tutto più reattivo e stabile
Non ho neanche dovuto reimpostare nulla nelle impostazioni, regole, rete, wifi, tutto automatico

Ottimo!