DAP-1320: Range Extender Wireless N 300

[Pondera]

D-Link DAP-1320
ripetitore senza fili 802.11n a 300 Mbps su 2,4 GHz
Rev. H/W: Ax, Bx, Cx


DAP-1320 Ax (Atheros AR9341) & Bx (Qualcomm Atheros QCA9533)

Panoramica
Il Range Extender Wireless N300 DAP-1320 è un prodotto portatile che ti permette di aumentare la copertura del tuo network wireless esistente. Puoi collegare questo device in una qualsiasi presa elettrica di casa tua per estendere il campo della tua rete senza fili. Tanto piccolo da poter stare nel palmo di una mano, ma così potente da raggiungere velocità wireless N fino a 300 Mbps.

Facile da configurare ed utilizzare
Configurare il DAP-1320 è semplice e veloce. Puoi usare l'app gratuita QRS Mobile sul tuo iPhone®, iPad® o device Android™ per installarlo senza utilizzare un computer; o puoi utilizzare il pulsante WPS per un associarlo rapidamente al router in tuo possesso.

Design compatto
Il DAP-1320 è pensato per l'utilizzo in qualsiasi ambiente, e disegnato per funzionare in qualsiasi presa a muro senza la necessità di cavi di alimentazione aggiuntivi. Le sue dimensioni ridotte gli consentono di occupare soltanto lo spazio della presa in cui è inserito, senza bloccare le prese adiacenti. Il suo aspetto discreto lo rende in grado di adattarsi ad ogni contesto senza risultare invadente.

Specifiche (traduzione da D-Link IT)
Interfacce dispositivo
Rete senza fili 802.11n/g/b
Pulsante configurazione protetta Wi-Fi (WPS)
Pulsante reimpostazione (reset)

LED
Stato/WPS

Standard
IEEE 802.11n/g/b

Gamma di frequenza della rete senza fili
Da 2,4 a 2,4835 GHz

Antenne
Due antenne interne

Tipo di spina
CEI 23-16/VII da 10 A con 2 poli

Sicurezza
Accesso protetto Wi-Fi (WPA/WPA2)
Crittografia WEP 64/128 bit
Pulsante WPS su circuito stampato (PBC, Printed Circuit Board)

Caratteristiche avanzate
Supporto app QRS (iOS, Android)

Gestione dispositivo
Interfaccia utente Web (Web UI)

Dimensioni
48 x 42 x 53.5 mm

Peso
69 grammi

Alimentazione
Ingresso: da 110 a 240 V CA, 50/60 Hz

Temperatura
Funzionamento: da 0 a 40 °C
Conservazione: da -20 a 65 °C

Umidità
Funzionamento: 10-90% senza condensa
Conservazione: 5-95% senza condensa

Certificazioni
FCC
IC
CE
UL
EMI/EMC
Certificato Wi-Fi

Documentazione
Rev. H/W: Ax
Scheda tecnica
Guida installazione
Manuale utente

Rev. H/W: Bx
Guida installazione
Manuale utente

Rev. H/W: Cx
Guida installazione
Manuale utente

Domande frequenti (Frequently Asked Questions - FAQ)
D-Link Italia
D-Link Canada

Emulatore

H/W:A1 F/W:1.00 2012/10/2 & 1.10 2013/6/19

Firmware
Rev. H/W: Ax
DAP-1320 Ax FIRMWARE PATCH v1.23B01 BETA 20180416 Note versione
DAP-1320 Ax 1.23B01 20180128
DAP-1320 Ax 1.22 build 01 20160620, Nota edizione
DAP-1320 Ax 1.21 build 05 20140807 con nota edizione
DAP-1320 Ax 1.21 build 01 20140517 con nota edizione
DAP-1320 Ax 1.20 build 07 beta 04 20141002 con nota edizione cumulativa
DAP-1320 Ax 1.20 build 07 20140318 con nota edizione

Rev. H/W: Bx
DAP-1320 Bx v2.04B02 20180429 Note versione
DAP-1320 Bx 2.04B02 20180105
DAP-1320 Bx 2.03 build 02 20141125 con nota edizione cumulativa
DAP-1320 Bx 2.02 build 01 20140828 con nota di edizione
DAP-1320 Bx 2.01 build 03 20140728 con nota di edizione

Rev. H/W: Cx
DAP-1320 Cx v3.02B01 20180429 Note versione
DAP-1320 Cx 3.02B01 20171225
DAP-1320 Cx 3.01 build 10 20161006 con nota edizione | Con nota edizione cumulativa
DAP-1320 Cx 3.00 build 08 20151210 con nota edizione

Istruzioni per l'aggiornamento
Una volta collegati al DAP via wireless mediante i dati reperibili nell'apposita targhetta allegata alla confezione (oppure quelli personalizzati se il DAP è già connesso ad un router wireless principale), digitare nel proprio browser gli indirizzi:
http://dlinkap.local
oppure
http://dlinkapwxyz.local (nel caso di più DAP-1320 già connessi allo stesso router wireless)
dove "wxyz" sono le ultime quattro cifre dell'indirizzo MAC del DAP-1320 indicate nella targhetta di configurazione Wi-Fi.

In alternativa assegnare prima un IP fisso al DAP-1320 da collegare a un router wireless con accesso da PC tramite l'ultima versione del vostro programma di navigazione su Internet preferito con Java aggiornato.

Approfondimenti
WikiDevi: D-Link DAP-1320 rev A1
WikiDevi: D-Link DAP-1320 rev B1

Supporto internazionale D-Link
Pagina prodotto: Italia, Russia, Brasile
Sito FTP: Europa, Germania, Russia, Canada, Stati Uniti, America Latina, Australia
Supporto tecnico: Taiwan TSD, Germania

[Pondera]

Documentazione multimediale
Video:
Cerca con Google

Presentazione

Configurazione

[AINEMORF]

Ciao a tutti,
ho visto questo bellissimo extender wireless della D-Link standard 300N  ma non riesco a trovarlo in vendita da nessuna parte...
Per caso deve ancora essere introdotto sul mercato italiano?
Mi sapete dire qualche cosa?

Vi ringrazio

[Pondera]

Si tratta di un nuovo modello di range extender (estensore di portata) in standard Wireless N 300 presente sul sito US e pronto per la vendita sul mercato statunitense in promozione a $49.99.
Per il mercato europeo non si trovano ancora valutazioni in euro, anche se è presente sul sito UK e IT e pure sulle altre consociate europee, ma lo hanno inserito nella categoria Powerline mentre andrebbe nella categoria Access Point, è evidente anche dalla serie del dispositivo cioé DAP e non DHP.

Spostiamo questa discussione nella giusta sezione e, appena uscirà sul mercato italiano, la trasformeremo nella discussione principale dedicata al dispositivo.

Nel frattempo se hai fretta e non necessiti dello standard N 300 potresti orientarti sul DIR-505 in standard wireless N 150 con molte più funzionalità oltre a quella di extender: router, access point e Hotspot Wi-Fi.

[arohi]

Ciao,
Ho un AP a 2,4 Ghz alla distanza di 150 mt e nell'appartamento arriva un debole segnale WI-FI. Lo potrei amplificare con un repeater? Questo dispositivo ha una porta ethernet? Potrei iniettare il segnale amplificato nella LAN in modo da alimentare altri AP ?

[Ammy]

Salve! ho appena comprato il range extender DAP-1320.  
Cercando su internet ho notato che non ci sono troppe informazioni su quest' apparecchio... mi stavo chiedendo " o funziona troppo bene... o al contrario è risaputo che non sia il massimo e io ho fatto un acquisto a caso". Non riesco a colegarlo con la smart tv. O meglio la smatv tv vede il DAP-1320 ci accede tramite password (come gatewey e dns ho impostato l' ip del DAP-1320) ma dal DAP-1320 riesce a connettersi ad internet.
Attraverso l' applicazione QRS da android  ho potuto cambiare nome e password, ma non posso entrare nelle impostazioni e provare a verificare i settaggi......  con il telefono non riesco ad accedere via browser al link indicato sul cartoncino per la configurazione......  mi dice pagina non trovata.
Portate pazienza... non sono un genio della tecnologia.......

[m4ss1]

(come gatewey e dns ho impostato l' ip del DAP-1320)

Ciao, devi mettere l'ip del router wireless.
Hai provato con il tasto WPS? Marca, modello e indirizzo ip del router principale?

[Pondera]

Discussione in rilievo e modificata in principale dedicata al DAP-1320.

[Ammy]

(come gatewey e dns ho impostato l' ip del DAP-1320)

Ciao, devi mettere l'ip del router wireless.
Hai provato con il tasto WDS? Marca, modello e indirizzo ip del router principale?

il router è quello fornito da infostrada Huawei HG532s indirizzo ip 192.168.1.1. Ho provato ad inserirlo come dns ma non funziona.
Il bello è che gli altri apparecchi, android, iphone.... si conettono ad internet tramite il dap 1320.... la smart tv.. no  

[Pondera]

Versione firmware del DAP-1320?
Modello Smart TV? Ha IP fisso o DHCP?

[Pondera]

Ho un AP a 2,4 Ghz alla distanza di 150 mt e nell'appartamento arriva un debole segnale WI-FI. Lo potrei amplificare con un repeater?

Certo! I ripetitori (repeater/range extender) sono fatti apposta!

Questo dispositivo ha una porta ethernet?

Dall'analisi su immagini e manuale pare proprio di no.

Potrei iniettare il segnale amplificato nella LAN in modo da alimentare altri AP ?

Non puoi farlo via cavo (wired), dato che pare manchi la porta Ethernet LAN, ma solo via senza fili (wireless).

[giov0910]

Ciao a tutti.
Ho Appena acquistato il wireless range extender N300 dap 1320 per potenziare il segnale della mia vodafone station 2.
Ho eseguito tutto quanto richiestomi nel manuale d'installazione fino a creare la rete dlink che però risulta essere limitata senza accesso ad internet.
Essendo un neofita sarei eternamente grato a chi volesse suggerirmi la soluzione. Grazie

[Pondera]

Pubblicato nel 1° messaggio di questa discussione firmware DAP-1320 A1/A2 1.11 build 10 Beta 01 20131024.

Codice Seleziona Espandi


Project Name: DAP-1320
HW version: A2
Region/OEM code: NA
WLAN Domain: 0x3A/FCC
Channel List:
2.4GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11
5GHz: none
Firmware Query URL:
http://wrpd.dlink.com.tw/router/firmware/query.asp?model=DAP-1320_Ax_Default
Flash size: 8MB
DRAM size: 64MB
Firmware Version: ver1.11b10beta01
Firmware Date: Thu, 24, Oct, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2528, Date: Wed, 23 Oct 2013
WLAN Version:  SVN Revision: 2539, Date: Thu, 24 Oct 2013
CheckSum: 0xE04719E5

Fixed bugs:
1. Samsung TV can't connect to internet when it gets ip






===============================================
 

Firmware Version: ver1.11b10
Firmware Date: Mon, 16, Sep, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2422, Date: Mon, 16 Sep 2013
WLAN Version:  SVN Revision: 2420, Date: Mon, 16 Sep 2013
CheckSum: 0xEF31B3B6

Fixed bugs:
2. Can't remove the password at iOS Mobile QRS.
Update:
1. Don't show ULA address at GUI, which is not support at router, too.
2. Support HNAP 1.09 instead GetOperationMode, SetOperationMode, SetAPClientSettings, GetSiteSurvey, which is not support at current Mobile QRS (Android 1.2, iOS 1.1 )






===============================================
 

Firmware Version: ver1.11b09
Firmware Date: Tue, 10, Sep, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2413, Date: Tue, 10 Sep 2013
WLAN Version:  SVN Revision: 2410, Date: Tue, 10 Sep 2013
CheckSum: 0x1F88DD1F

Fixed bugs:
1. Add Radius server to   GetWLanRadioSecurity
2. Remove  support some HNAP Version 2.00 command
3. support iOS6 Mobile QRS 1.11,iOS7 Mobile QRS 1.2.0.1, Android Mobile QRS V1.2





===============================================
 

Firmware Version: ver1.11b08
Firmware Date:Fri, 06, Sep, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2404, Date: Fri, 06 Sep 2013
WLAN Version:  SVN Revision: 2390, Date: Wed, 04 Sep 2013
CheckSum: 0x53660F0A

Fixed bugs:
4. When restore to default, don't connect to any rootap.
5. Mac OSx Safari 6.1 upgrade fw fail
6. Fix Default can't doing Mobile QRS

Update:
1. Support IOS 7 app.
2. Support HNAP V1.00 before new Mobile QRS app release.




===============================================

 

Firmware Version: ver1.11b07
Firmware Date: Tue, 03, Sep, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2387, Date: Tue, 03 Sep 2013
WLAN Version: SVN Revision: 2382, Date: Mon, 02 Sep 2013
CheckSum: 0x0EB7F0F0

Fixed bugs:
7. HNAP setapclientsettings not check key is invalid (ex, wpa key input less then 8 or greater then 63 character)
8. HNAP getsitesurvey response loss some string (channel / signalstrength)
9. HNAP getavailablelanguagelist tool  result fail
10. HNAP getwlanradiosetting sequence error
11. HNAP setwlanradiosetting  success will not reboot
12. HNAP getipv6status response error unknow

Update:
1. When restore to default, don't connect to any rootap.



===============================================
 

Firmware Version: ver1.11b06
Firmware Date: Tue, 27, Aug, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2357, Date: Mon, 26 Aug 2013
WLAN Version: SVN Revision: 2359, Date: Mon, 26 Aug 2013
CheckSum: 0x8B3DBAFD

Fixed bugs:
1. Fixed site survey can't show channel 10 SSID issue.
2. Modified GUI to meet customer's request.

Update:
1. Support HNAP 1.09 spec
2. Support D-Link Router Firmware Version Query and Download 1.14 spec


===============================================
Firmware Version: ver1.11b05
Firmware Date: Tue, 30, Jul, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2254, Date: Fri, 26 Jul 2013
WLAN Version: SVN Revision: 2227, Date: Thu, 18 Jul 2013
CheckSum: 0xD3DCE110

Fixed bugs:
1. 0025714: The warning message for Gateway setting is incorrect. When Gateway is different from DUT's LAN subnet, Web UI will show "must be within the WAN subnet".
2. 0025745: After WPS is failed or cancel the ongoing Wizard, Web UI would not show uplink side is disconnected. Based on the specification, Web UI should show Uplink side is disconnected.
3. Fix Wi-Fi clients ip show 0.0.0.0

Update:
1. Support mDNS 1.07
2. Change upgrade firmware UI



 
Firmware Version: ver1.11b04
Firmware Date: Tue, 23, Jul, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2231, Date: Fri, 19 Jul 2013
WLAN Version: SVN Revision: 2227, Date: Thu, 18 Jul 2013
CheckSum: 0x7BC64F9B

Fixed bugs:
1. fix ipv6 some setting will be empty after setting wireless
 
Firmware Version: ver1.11b03
Firmware Date: Fri, 19, Jul, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2231, Date: Fri, 19 Jul 2013
WLAN Version: SVN Revision: 2227, Date: Thu, 18 Jul 2013
CheckSum: 0xB5478E10

Fixed bugs:
1. fix when check new firmware will show 01.00 instead 1.00
 

Firmware Version: ver1.11b02
Firmware Date: Wed, 17, Jul, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2215, Date: Wed, 17 Jul 2013
WLAN Version: SVN Revision: 2205, Date: Tue, 16 Jul 2013
CheckSum: 0x9B18E769

Fixed bugs:
1. fix device name can save empty name.
2. default setup wizard cancel  will show page error
3. default setup wizard manual scan finished not show countdown and refresh page will redirect to setup wizard
 

Firmware Version: ver1.11b01
Firmware Date: Wed, 17, Jul, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2211, Date: Tue, 16 Jul 2013
WLAN Version: SVN Revision: 2205, Date: Tue, 16 Jul 2013
CheckSum: 0x9FDA47CE

Fixed bugs:
1. fix device name can save empty name.
Update:
1. remove unnecessary program for security issue.
2. when wpa_supplicant out of service, make it re-process again automatically.

 

Firmware Version: ver1.10b14
Firmware Date: Wed, 19, Jun, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2121, Date: Wed, 19 Jun 2013
WLAN Version: SVN Revision: 2075, Date: Thu, 06 Jun 2013
CheckSum: 0x647579BB

Fixed bugs:
1. fix can't save key at wireless page

Firmware Version: ver1.10b13
Firmware Date: Wed, 19, Jun, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2117, Date: Tue, 18 Jun 2013
WLAN Version: SVN Revision: 2075, Date: Thu, 06 Jun 2013
CheckSum: 0x77B5D21F

Fixed bugs:
1. update HNAP wrong tag.

Update:
1. update MP issue

 

Firmware Version: ver1.10b12
Firmware Date: Mon, 10, Jun, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2083, Date: Mon, 10 Jun 2013
WLAN Version: SVN Revision: 2075, Date: Thu, 06 Jun 2013
CheckSum: 0xB645390F

Fixed bugs:
1. fix Wizard can't enable WPS. When Web UI counts down 120 seconds WPS process, the LED of DUT doesn't blink. This issue happens in default or non-default settings.
2. fix When the SSID of Root AP include character &, Web UI of DUT would show incorrect. e.g. The SSID of Root AP is SSID&12345, DUT would show SSID only.
3. fix setup wizard run PBC when overlapping  , close countdown page , then repeat setup wizard PBC  will cause error page
4. fix GetIPV6status -show 500 error , GetsitSurvey/GetAPclientSettings ESSID should MacAddress ,SetAPClientSettings on WEP and WPA mode not set
 

Firmware Version: ver1.10b11
Firmware Date: Mon, 3, Jun, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2045, Date: Mon, 03 Jun 2013
WLAN Version: SVN Revision: 2014, Date: Tue, 28 May 2013
CheckSum: 0x9A2C25FC

Update:
1. support HNAP Extension V1.05
Fixed bugs:
1.#229: when from RootA to RootB use pbc fail , use HW PBC success ,subnet not be change , ssid became RootB (different subnet and channel)
2. #228 ipad on setup wizard page typesetting via safari browser when rotate the page

 
Firmware Version: ver1.10b10
Firmware Date: Thu, 30, May, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2027, Date: Thu, 30 May 2013
WLAN Version: SVN Revision: 2014, Date: Tue, 28 May 2013
CheckSum: 0xA6BC2312

Fixed bugs:
1.#225: when from RootA to RootB fail via PBC fail , wi-fi ssid and channel  
           be change to RootB  (differend subnet and channel)
2.#226: when from RootA to RootB fail via PBC , HW LED still fix green
3.#227: when from RootA to RootB success via PBC  and reboot
          countdown finished , WebUI still show disconnect , LED blinking
          orange


 

Firmware Version: ver1.10b09
Firmware Date: Tue, 28, May, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2015, Date: Tue, 28 May 2013
WLAN Version: SVN Revision: 2014, Date: Tue, 28 May 2013
CheckSum: 0xD285BC10

Fixed bugs:
1: change wps behavior when DAP-1320 connect rootap-A to rootap-B via wizard wps, it will disconnect from rootap-A.


 

Firmware Version: ver1.10b08
Firmware Date: Date: Thu, 23, May, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1987, Date: Wed, 22 May 2013
WLAN Version: SVN Revision: 1985, Date: Wed, 22 May 2013
CheckSum: 0x9AC0BC55

Fixed bugs:
1. #223: use HW PBC connect uplink router success, wi-fi ssid and password has been change, but need manual reboot.

Support
1. add local storage function for Multi-Language.


 

Firmware Version: ver1.10b07
Firmware Date: Mon, 20, May, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1960, Date: Fri, 17 May 2013
WLAN Version: SVN Revision: 1962, Date: Fri, 17 May 2013
CheckSum: 0x3C9C7E5A

Fixed bugs:
2. #219: setup wizard issue:
    0. Setup a Wi-Fi channel analyzer and monitor the channel of DUT, Router_X and Router_Y
1. [Client] connects to DUT upon CH1, and DUT connects to uplink Router_X upon CH1.
2. Run DUT setup wizard and select WPS PBC for an uplink connection.
3. Trigger WPS PBC in uplink Router_Y where Router_Y is on CH11.
(fix wps change rootap-a to rootap-b wps issue.)
3. #220: setup wizard manual at uplink password field input special character  issue

 

Firmware Version: ver1.10b06
Firmware Date: Wed, 15, May, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1929, Date: Wed, 15 May 2013
WLAN Version: SVN Revision: 1907, Date: Mon, 13 May 2013
CheckSum: 0xA4321261

Fixed bugs:
1. #211: Macbook use chrome on default setup wizard repeat reload
2. #212: wi-fi scan ssid  '/.,~!@#$%^&*()_+]['/}{"?>3. #213: wi-fi password input '/.,~!@#$%^&*()_+]['/}{"?>4. #214: extended wi-fi password input '/.,~!@#$%^&*()_+][
'/}{"?>5. #215: default setup wizard on IE9/10 issue
6. #216: default setup wizard on IE7 issue
7. Fix other UI display issue on EL, SV, TW, CN, RU and KR

Changes
1. Modify the popup message box's layout by D-Link's request


 
Firmware Version: ver1.10b05
Firmware Date: Fri, 10, May, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1895, Date: Fri, 10 May 2013
WLAN Version: SVN Revision: 1854, Date: Tue, 07 May 2013
CheckSum: 0x6C56FD8B

Fixed bugs:
1. Apply new UI spec by D-Link request-Fix the additional UI issues under the language PL and language KR.
2. #210: when setup wizard WPS fail , HW LED still  fix green, DUT not release ip.

Support
1. Apply the "Language auto detected" feature


 
Firmware Version: ver1.10b04
Firmware Date: Wed, 8, May, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1875, Date: Wed, 08 May 2013
WLAN Version: SVN Revision: 1854, Date: Tue, 07 May 2013
CheckSum: 0xE93D8929

Fixed bugs:
1. Apply new UI spec by D-Link request-Fix the bugs

 

Firmware Version: ver1.10b03
Firmware Date: Mon, 29, Apr, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1792, Date: Mon, 29 Apr 2013
WLAN Version: SVN Revision: 1722, Date: Tue, 16 Apr 2013
CheckSum: 0x8700551D

Support
1. Apply the Multi-Language switch function for the UI
2. Apply new UI spec by D-Link request

Fixed bugs:
1. IPv6 DNS provision issue-The DUT can get the IPv6 address, but the DNS value is incorrect (the value shows NULL)
2. WPS UI information issue-when the WPS process by UI wizard incomplete, the status shows disconnected but the topology shows connected.


 
Firmware Version: ver1.10b02
Firmware Date: Tue, 16, Apr, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1723, Date: Tue, 16 Apr 2013
WLAN Version: SVN Revision: 1722, Date: Tue, 16 Apr 2013
CheckSum: 0x6C53AA21

Changes:
1. Change the IPv6 default connection configuration from the link-list to auto-configuration


 
Firmware Version: ver1.10b01
Firmware Date: Mon, 15, Apr, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1714, Date: Fri, 12 Apr 2013
WLAN Version: SVN Revision: 1711, Date: Thu, 11 Apr 2013
CheckSum: 0x8CC1F6A4

Changes:
1. Change the release information to v1.10b01 (By D-Link Request)


 
Firmware Version: ver1.01b03beta22
Firmware Date: Thu, 11, Apr, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1701, Date: Wed, 10 Apr 2013
WLAN Version: SVN Revision: 1645, Date: Tue, 02 Apr 2013
CheckSum: 0x5887F5FF

Fixed bugs:
1. #205: use safari in setup wizard / topology / upgrade firmware show count down graph very slowly via ipad
2. #206: use safari in upgrade firmeare show broken figure issue via ipad


 
Firmware Version: ver1.01b03beta21
Firmware Date: Wed, 10, Apr, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1688, Date: Tue, 09 Apr 2013
WLAN Version: SVN Revision: 1645, Date: Tue, 02 Apr 2013
CheckSum: 0x0EE2CE7A

Changes:
1. Add an "OK" button for the pop up box when showing the non- forwarding message that will close the pop-up box when clicked.
2. Modify the page return behavior when user click the "Save" -> "Reboot Now" button for the Admin.htm.
3. Fix the login no response bug when the station is safari on iOS device which open the private browsing mode.
4. Turn off the auto capitalize behavior for all text fields on the GUI when the station is iOS device.
5. Replace the wording "unknow" with "unknown" for the wireless client list.


 
Firmware Version: ver1.01b03beta20
Firmware Date: Mon, 1, Apr, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1618, Date: Mon, 01 Apr 2013
WLAN Version: SVN Revision: 1610, Date: Mon, 01 Apr 2013
CheckSum: 0x071051DB

Fixed bugs:
1. #198: when extended wi-fi name input "'/.,~!@#$%^&*()_+]['/}{"?>
2. #199: setup wizard use manually , when input "'/.,~!@#$%^&*()_
+]['/}{"?>


 
Firmware Version: ver1.01b03beta19
Firmware Date: Mon, 1, Apr, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1611, Date: Mon, 01 Apr 2013
WLAN Version: SVN Revision: 1610, Date: Mon, 01 Apr 2013
CheckSum: 0xC1B3CBA1

Fixed bugs:
1. #197: broken UI issue when DUT is under factory default and user try to access URL which is included sub directory (ex: http://www.google.com /layer1/layer2)




 
Firmware Version: ver1.01b03beta18
Firmware Date: Fri, 29, Mar, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 1598, Date: Fri, 29 Mar 2013
WLAN Version: SVN Revision: 1482, Date: Thu, 21 Mar 2013
CheckSum: 0xD4120CF8

Fixed bugs:
1. #151: break graph issue -1
2. #195: upgrade firmware typesetting issue
3. #196: when uplink is already connected, and try to connect to another uplink with different channel,after enter wi-fi password, wi-fi client will be disconnected before UI pop out any message




 

Firmware Version: ver1.01b03beta17
Firmware Date: Tue, 26, Mar, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1541, Date: Tue, 26 Mar 2013
WLAN Version: SVN Revision: 1482, Date: Thu, 21 Mar 2013
CheckSum: 0x99822BCC

Fixed bugs:
1. #193:
(1) After a 100% firmware upload, the WebUI goes blank and empty for a while and then shows the count down.  
(2) Make an uplink connection directly from the topology to a uplink router that is in a different channel, I see blank/empty WebUI.  
I should see warming message first, right?
(3) After a firmware upgrade count down, the WebUI doesn't take me to http://dlinkrouter.local or whatever the device name is,
but redirect me to 192.168.0.50 as I first used to login the WebUI.
2.#195: upgrade firmware typesetting issue


Changes:
1. Apply new wording
2. Move the remove language pack button to firmware page


 
Firmware Version: ver1.01b03beta16
Firmware Date: Fri, 15, Mar, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1416, Date: Fri, 15 Mar 2013
WLAN Version: SVN Revision: 1371, Date: Tue, 12 Mar 2013
CheckSum: 0x56FED9F3

Fixed bugs:
1.#190: ie7 setup wizard  back button fail
2.#191: ie7 reboot countdown issue
3.#192: ie7 ipv4 device management interface issue
4.#193:
(1) After a 100% firmware upload, the WebUI goes blank and empty for a while and then shows the count down.  
(2) Make an uplink connection directly from the topology to a uplink router that is in a different channel, I see blank/empty WebUI.  
I should see warming message first, right?
(3) After a firmware upgrade count down, the WebUI doesn't take me to http://dlinkrouter.local or whatever the device name is,
but redirect me to 192.168.0.50 as I first used to login the WebUI.
5.#194: statistics unit issue




 
Firmware Version: ver1.01b03beta15
Firmware Date: Mon, 11, Mar, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1365, Date: Mon, 11 Mar 2013
WLAN Version: SVN Revision: 1331, Date: Fri, 08 Mar 2013
CheckSum: 0xB5257A05

Fixed bugs:
1.#175:upgrade firmware issue
2.#176:ipad upgrade firmware sometime stop in Downloading page
3.#177:setup wizard in setup complete step show wi-fi name incomplete when ssid is (!@#$%^&*()_+|-=\{}":<>?,/;'][`~)
4.#179:ie7 admin issue
5.#180:ie7 countdown issue
6.#181:ie7 network ipv6 autoconfigure not choose issue
7.#183:ie7 scan ssid issue
8.#184:ie7 setup wireleass security mode issue
9.#185:ie7 setup wizard issue
10.#186:ie7 statistics issue
11.#187:ie7 upgrade firmware issue
12.#188:"DUT's AP SSID: No Coffee No Work I upgraded the FW from Beta13 to Beta14, and then login into the DUT. DUT connected to uplink router well.  And then I changed the device name (mDNS) from default (dlinkap) to dap1320.  And then it reboots and then I see below SSID. "
13.#189:upgrade firmware broken figure

Changes.:
1.Apply 7-day auto firmware check feature

P.S.:
1. #182:ie7 reboot issue -> It's not a bug



 


Firmware Version: ver1.01b03beta14
Firmware Date: Fri, 1, Mar, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1266, Date: Wed, 27 Feb 2013
WLAN Version: SVN Revision: 1123, Date: Tue, 15 Jan 2013
CheckSum: 0x7F426615

Fixed bugs:
1.# 142: IE8 log in page is blank
2.#143:wi-fi ssi typesetting issue
3.#144:setup wizard choose WEP , text descript issue
4.#145:
(1).sometime setup wizard process WPS-PBC, connect firest RootAP success. Then  Connect another RootAP cause connect fail , bug in shield-room test not problem , attach capture file ->dap1320capture.rar
(2).we have copy the ssid and password is blank issue, happen in connect second RootAP fail .
(3).sometime happen countdown stop webui not any reponse issue
device info==>,client mac:ac:f1:df:7d:0f:e4 rootap1:1c:7e:e5:33:1e:8c , rootap2: 1c:af:f7:da:0c:db dut:c8:be:19:e5:13:cb
5.#146:setup wizard sometime can show break graph
6.#148:setup wizard show blank ssid and password
7.#150:"I cliecked ""Check for new FW"" and it takes me like 20 seconds before it tells me the fw is the newest. Do you think we can make it faster or at least show the progress for users to know it is still working.Otherwise, it looks like a malfunction to me"
8.#152:break graph issue -2
9.#155:wrong text description on firmware upgrade
10.#156:ipad in setup wizard mamually save finished not show countdown icon
11.#157:after ipad upgrade firmware show broken figure
12.#158:ipad countdown icon broken figure
13.#160:when scan ssid failed , press retry cause wrong typesetting  
14.#169:After change devicename e.g abcde ,then choose setup wizard , devicename become default dlinkap
15.#170:"After change devicename e.g abcde ,then  choose ""connect to an uplink router"" button , devicename become default dlinkap"
16.#171:setup wizard  select wps fail and retry again , cause broken figure
17.#172:setup wizard ->uplink router typesetting display issue
18.#173:"setup wizard ,select wps  and uplink router ssid is special character(!@#$%^&*()_+|-=\{}"":<>?,/;'][`~) , but WebUI show (!@#$%^&*()_+|-=\{}"":<>?, /;'][`~) , cause uplink router connect fail and run setup wizard wps HW LED light off."

P.S.:
1.#153:"I ran site survey and I can see my own SSID of AP, what will happen if I select the SSID for my AP-Clinet?  A loop will occur?? Please please do filter out the SSID of the device itself." -> It's not a bug
2.#154:Every step of the wizard (only in IE9, Chrome and Firefox are okay) -> It's not a bug

 

Firmware Version: ver1.01b03beta13
Firmware Date: Thu, 7, Feb, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1247, Date: Thu, 07 Feb 2013
WLAN Version: SVN Revision: 1123, Date: Tue, 15 Jan 2013
CheckSum: 0x0DC23285

Fixed bugs:
1.#138: "掃到相同的 SSID 應該只秀一個出來.  意思是, 如果掃到兩個相同的 SSID 且他們各自都有加密,則只秀訊號強的那個出來. 如果掃到兩個相同的 SSID 一個有加密一個沒有, 則兩個都秀出來"
2.#139: "Issue:
Log in UI takes too long time
It doesn't seem time out when I stay in the same UI page doing nothing after 3 mins"
3.#140:steup wizard not detect WEP  mode
4.#141: DUT connect RootAP via PBC  first. Then connect client via PBC  , cause DUT connect fail with RootAP

 

Firmware Version: ver1.01b03beta12
Firmware Date: Fri, 1, Feb, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1216, Date: Fri, 01 Feb 2013
WLAN Version: SVN Revision: 1123, Date: Tue, 15 Jan 2013
CheckSum: 0x05AF68CF

Change:
1.Support the "Auto upgrade firmware" feature

 
Firmware Version: ver1.01b03beta11
Firmware Date: Wed, 30, Jan, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1199, Date: Tue, 29 Jan 2013
WLAN Version: SVN Revision: 1123, Date: Tue, 15 Jan 2013
CheckSum: 0xD73E5B86

Fixed bugs:
1.#122: client use DWA-140 ,DWA-160 connect Dap1320 open WebUI too slow
2.#123: Macbook client connect Dap1320 , open WebUI too slow
3.#124: Macbook client connect Dap1320 use wep security , fail to get ip
4.#129: wi-fi ->"connect to another uplink router" issue

 

Firmware Version: ver1.01b03beta09
Firmware Date: Thu, 24, Jan, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1164, Date: Tue, 22 Jan 2013
WLAN Version: SVN Revision: 1123, Date: Tue, 15 Jan 2013
CheckSum: 0xAC5159C7

Fixed bugs:
1. #119:sometime click wi-fi "Connect to another uplink router"button  input wrong password ,cause DUT crash
2. #125:When device in unconfig mode, login UI should go wizard directly
3. #126:extended network default option issue
4. #127:network status issue
5. #128:wi-fi setup page issue
6. #129:wi-fi ->"connect to another uplink router" issue
7. #130:WebUI typesetting issue
8. #131:WebUI select ssid typesetting issue
9. #132:extender typesetting issue
10. #133:wi-fi setup issue
11. #134:wep password length issue
12. #135:remove hw version and fw version information
13. #136:system button issue
14. #137:statistic issue

 
Firmware Version: ver1.01b03beta08
Firmware Date: Fri, 18, Jan, 2013
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1146, Date: Fri, 18 Jan 2013
WLAN Version: SVN Revision: 1123, Date: Tue, 15 Jan 2013
CheckSum: 0x1B028C51

Fixed bugs:
1. #80:log in word was wrong
2. #84:Wi-Fi Settings Scan button check , show Scanning graph ,but no reponse with IE9
3. #92:enable graphical  authentication and passwd  authentication cause login fail
4. #93:"When setup wizard use WPS or manual setup finished ,WebUI show password should be the same uplink router  and not default password"
5. #98:Wi-Fi connect setup wizard  button show blank with IE browser and not  procedure
6. #99:When input wrong password in login page cause WebUI not login with  IE and opera browser
7. #100:wi-fi typesetting with IE8
8. #101:opera browser typesetting issue
9. #102:when wi-fi setup finished ,reboot now  button  invalid  with IE8
10. #103:Manegement -> statistics  no show graphic with IE8
11. #104:"橘色部分字很模糊; 紅色部分字體太細小; 藍色部分可以看出整個位置跑掉了;"
12. #105:"Red section, in this page, show 20 characters prefix of each SSID including space(null) and then ..., if the total length of the SSID is more than 20 characters. Blue sections, broken image under retina display"
13. #106:Red section, broken image
14. #107:"
(1). Red Section, No need Warming icons for all IPv6 thing.
(2). Orange Section, no space is needed between a word and a "":""
(3). Blue Section, If None, no need to break into new line. Keep the same line.  Only break into a new line if it is too long to be displayed in a single line. When break into two lines, please keep the following style as the screenshot, move the entire thing (ie. IPv6 Address or SSID) but not a partial of the thing.
(4). Red line, please follow our design exactly.  A tab space is needed"
15. #108:"As mentioned!! And please check with Betty and Claire for the final position. We have our 排版 defined in our documents"
16. #109:"
(1). Red sections, broken image. I can find it easily on my MacBook Air, and of course can find it in New iPad (Retina Display)
(2). Blue section, 位置跑掉了
(3). Orange section, 字太小太細
(4). Black section, please follow our design.  A empty line is needed between ""A password is required ..."" and ""Password:""
(5). Black section, no need a "":"" after the selected SSID "
17. #110:Cannot click "connect"   functional fail!!
18. #111:Under topology, site survey, show 17 characters prefix of an long SSID and then ... , only 3 dots
19. #112:Discover the Source Field .... the "e" of the was cut
20. #113:Something wrong with the background of site survey result and sometimes we can see an empty list.
21. #114:"My password is not WDB8WvbXdH!!  I can login WebUI using the correct password. No matter what the real Admin password is, it seems showing the same thing on UI"
22. #115:"Can't duplicate it all the time, but sometimes when enter a wrong admin password, I see below page which goes normal login and captcha login. "
23. #116:"I tried two devices, both of them cannot list ""Starship Enterprise"". Starship Enterprise is another DAP-1320 sample running MP FW. (Starship Enterprise can scan/list DAP-1320-Hans, so does my MacBook. My MacBook can scan/list and connect to Starship Enterprise without any problem)"
24. #117:The dropdown menu for language shifted
25. #118:Setup Wizard , select non-security ssid  still need input password

Changes:
1. support PBC5 method, DUT push button can connect rootap or station

 
Firmware Version: ver1.01b03beta05
Firmware Date: Fri, 28, Dec, 2012
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1063, Date: Fri, 28 Dec 2012
WLAN Version: SVN Revision: 1026, Date: Fri, 07 Dec 2012
CheckSum: 0x0D600367

Fixed bugs:
1. #80: log in word was wrong
2. #81: wi-fi network typesetting issue
3. #82: chrome typesetting with WEP security
4. #83: WebUI Setup Wizard invalid
5. #84: Wi-Fi Settings Scan button check , show Scanning graph but no reponse with IE9
6. #85: Extended Wi-Fi Setting security choose WEP not be saved
7. #86: Enable/Disable should be a "word" not an image
8. #87: Please use iPad 3 or iPad 4 to verify your WebUI. A retina display does helps
9. #88: Please once again provide the "lock" image in a higher resolution. Thanks!
10. #89: (1) Security的 drop down menu 沒對齊
(2) Security 的 drop down menu 左邊是圓角右邊是直角
(3) Site Survey 按鈕沒對齊
11. #90: Quick refresh the web page, I see below  (1) --(2).   Why load all images even when a connection is successfully and device is under a perfect condition?
12. #90: (1) DAP-1320 device 圈圈燈沒亮
(2) 當網路不順慢一點出來可以發現DAP-1320 和 Clients 兩個圈圈中間的連現過長，會長到Client下面。如果網路順，沒問題，但不順時就會先看到長長一條線，然後才看到client的圈圈蓋住多出來的線的部份
 
Firmware Version: ver1.01b03beta04
Firmware Date: Mon, 24, Dec, 2012
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1058, Date: Tue, 25 Dec 2012
WLAN Version: SVN Revision: 1026, Date: Fri, 07 Dec 2012
CheckSum: 0xB75BDA11

Change:
1. Apply new UI and related style
 
Firmware Version: ver1.01b03beta02
Firmware Date: Thu, 30, Nov, 2012
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 1015, Date: Fri, 30 Nov 2012
WLAN Version: SVN Revision: 1015, Date: Fri, 30 Nov 2012
CheckSum: 0x3E162AF1

Change:
1. Add Proxy station patch

Firmware Version: ver1.01b03beta01
Firmware Date: Thu, 15, Nov, 2012
KERNEL: 2.6.31, SVN Revision: 896, Date: Fri, 09 Nov 2012
Application: SVN Revision: 961, Date: Thu, 15 Nov 2012
WLAN Version: SVN Revision: 891, Date: Fri, 09 Nov 2012
CheckSum: 0xE45AFD7D

Fixed bugs:
1. Fix incorrect description in Help page.

Firmware Version: ver1.01b03
Firmware Date: Wed, 24, Oct, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 736, Date: Wed, 24 Oct 2012
WLAN Version: SVN Revision: 708, Date: Mon, 15 Oct 2012
CheckSum: 0xDB8FC57D

Change:
   1. Remove WPS patch from QCA and recover PBC/PBC5 and LED behavior.

Fixed bugs:
1. Extend wi-fi create a new name should not input over 32 characters.
   2. upnp and mdns spec 1.03 hnap mac should is upper case [0-9A-F].

Firmware Version: ver1.01b02
Firmware Date: Fri, 19, Oct, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 726, Date: Fri, 19 Oct 2012
WLAN Version: SVN Revision: 708, Date: Mon, 15 Oct 2012
CheckSum: 0x753D595F

Fixed bugs:
1. WI-FI use WEP 64/128bit hex/ascii, client not obtain ip from DUT(uplink not connected)
   2. QRS Mobile do second connect often fail , mdns show v6 address
   3. User can not see WSC icon at Windows 7  Sometimes user still can not see the icon but we think it is caused by client side because after restart the wireless interface then user can see the icon again.

Firmware Version: ver1.01b01
Firmware Date: Tue, 16, Oct, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 714, Date: Tue, 16 Oct 2012
WLAN Version: SVN Revision: 708, Date: Mon, 15 Oct 2012
CheckSum: 0x649941DF

Change:
   1. When push DUT physical WPS button, DUT can check it is AP-Client or AP by itself to finish following WPS procedure.
Fixed bugs:
    1. DUT can not get IP from DSL-3680 when security mode is WPA, WPA2 or WPA/WPA2.

Firmware Version: ver1.00b25
Firmware Date: Tue, 9, Oct, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 697, Date: Tue, 09 Oct 2012
WLAN Version: SVN Revision: 682, Date: Wed, 03 Oct 2012
CheckSum: 0xA8C8A20B

Change:
   1. Follow "D-Link AP and Router UPnP and mDNS Specification v1.03" to add text fields in mDNS messages.

Fixed bugs:
   1. Long connection time with RootAPs whose security mode is WEP/OPEN  In v1.00b25, the connection could be established in 90 seconds.
   2. If DUT connect to RootAP by WPS, the password is shown as 64 HEX characters.
   3. MACBOOK use google chrome in WebUI setup wizard Typesetting error

Firmware Version: ver1.00b24
Firmware Date: Tue, 2, Oct, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 671, Date: Mon, 01 Oct 2012
WLAN Version: SVN Revision: 676, Date: Tue, 02 Oct 2012
CheckSum: 0x34CE5EBD

Fixed bugs:
   1. IPv6 ICMP issue: Client could not get ICMP reply (ping) from the server which is located at Root AP WAN side unless it sends ICMP request to Root AP's LAN global IP address first.

Firmware Version: ver1.00b23
Firmware Date: Tue, 2, Oct, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 671, Date: Mon, 01 Oct 2012
WLAN Version: SVN Revision: 673, Date: Tue, 02 Oct 2012
CheckSum: 0xC2EE60EF

Fixed bugs:
   1. DUT takes 4 minutes to establish uplink DAP-1320 after QRS Mobile / UI finish setup successfully (WPA/WPA2 mode).
   2. DUT do not relay IPv6 RA packets if Root AP send it with unicast MAC address

Firmware Version: ver1.00b22
Firmware Date: Fri, 28, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 669, Date: Fri, 28 Sep 2012
WLAN Version: SVN Revision: 635, Date: Thu, 20 Sep 2012
CheckSum: 0x145DB0A5

Fixed bugs:
   1. Sometimes QRS Mobile can not work.

Firmware Version: ver1.00b21
Firmware Date: Wed, 26, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 656, Date: Wed, 26 Sep 2012
WLAN Version: SVN Revision: 635, Date: Thu, 20 Sep 2012
CheckSum: 0x180091AC

Fixed bugs:
   1. Fix broken UI issue when DUT is under factory default and user try to access URL which is included sub directory (ex: http://www.google.com/layer1/layer2)

Firmware Version: ver1.00b20
Firmware Date: Tue, 25, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 653, Date: Tue, 25 Sep 2012
WLAN Version: SVN Revision: 635, Date: Thu, 20 Sep 2012
CheckSum: 0x78125568

Change:
   1. Re-design 404-redirection-feature to meet D-Link requirement.
       While uplink is failed, if DUT is un-configured mode (default), then user would be redirected to Setup Wizard. Otherwise, user would see his own "404 Not Found" page.

Fixed bugs:
   1. The Web UI sometime can't show the available network (site survey result would be empty).
   2. When Daylight Saving is enabled, Daylight Saving Offset would always be +1:00 even if the user configures to other value (like -2:00).

Firmware Version: ver1.00b19
Firmware Date: Mon, 24, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 644, Date: Mon, 24 Sep 2012
WLAN Version: SVN Revision: 635, Date: Thu, 20 Sep 2012
CheckSum: 0x9659D8E5

Change:
   1. Remove 404-redirection-feature to prevent iOS 6 wrongly recognize the redirection.

Firmware Version: ver1.00b18
Firmware Date: Thu, 20, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 638, Date: Thu, 20 Sep 2012
WLAN Version: SVN Revision: 635, Date: Thu, 20 Sep 2012
CheckSum: 0x3D757F7A

Fixed bugs:
   1. Sometimes stations could ping DUT but could not ping Root AP
   2. Use ipad/Android can obtain IP from RootAP through dap-1320, ping RootAP fail when the period of inactivity
   3. Open DUT web UI by IPv6 and setup login password or graphical authentication, when login  web UI input incorrect value  will display invalid.

Firmware Version: ver1.00b17
Firmware Date: Thu, 20, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 631, Date: Thu, 20 Sep 2012
Application: SVN Revision: 627, Date: Wed, 19 Sep 2012
WLAN Version: SVN Revision: 630, Date: Thu, 20 Sep 2012
CheckSum: 0xE379A1DE

Fixed bugs:
   1. Sometimes stations could ping DUT but could not ping Root AP
   2. Use ipad/Android can obtain IP from RootAP through dap-1320, ping RootAP fail when the period of inactivity
   3. Open DUT web UI by IPv6 and go to maintenance page to reboot DUT, the web UI will display invalid

Firmware Version: ver1.00b16
Firmware Date: Wed, 19, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 624, Date: Wed, 19 Sep 2012
Application: SVN Revision: 627, Date: Wed, 19 Sep 2012
WLAN Version: SVN Revision: 622, Date: Tue, 18 Sep 2012
CheckSum: 0x99F7E4D2

Fixed bugs:
   1. when use WPS add device in setup wizard, Press second time virtual PUSH button, not flash green light
   2. Use ipad input correct password to connect dap-1320 ,often  show password incorrect
   3. Sometimes hard to connect to DAP-1320 via iPad/iPhone, keep showing unable to join the network

Firmware Version: ver1.00b15
Firmware Date: Mon, 17, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 515, Date: Thu, 09 Aug 2012
Application: SVN Revision: 616, Date: Mon, 17 Sep 2012
WLAN Version: SVN Revision: 612, Date: Mon, 17 Sep 2012
CheckSum: 0x13C49C5E

Change:
   1. Follow D-Link AP and Router Device Management v1.05 to remove 192.168.0.50 if DUT get IP from DHCP server.
   2. Update some UI string by D-Link request.
   
Fixed bugs:
   1. While setting DUT extended WI-FI to WEP security and push the DUT PBC, the LED will light off until reboot DUT.  Do not receive new definition for this condition until now so we just reset LED back to previous status if WPS is disabled.
   2. Sometimes stations could ping DUT but could not ping Root AP.

Firmware Version: v1.00b14
Hardware Version: A1
Date: Wed, 12, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 515, Date: Thu, 09 Aug 2012
Application: SVN Revision: 591, Date: Wed, 05 Sep 2012
WLAN Version: SVN Revision: 593, Date: Tue, 11 Sep 2012
CheckSum: 0xBF2B0A11

Fixed bugs:
   1. Stations could not connect successfully to DUT while both of the security at uplink and downlink are WEP but be set as different keys.
   2. Stations would receive 'Deauth' packets continuously while giving uplink a wrong password.
   

Firmware Version: v1.00b13
Hardware Version: A1
Date: Wed, 5, Sep, 2012
KERNEL: 2.6.31, SVN Revision: 515, Date: Thu, 09 Aug 2012
Application: SVN Revision: 591, Date: Wed, 05 Sep 2012
WLAN Version: SVN Revision: 548, Date: Fri, 24 Aug 2012
CheckSum: 0xDC09BD4D

Change:
   1. Rearrange UI layout in index.htm
   2. Update the formula to convert RSSI to signal strength percentage.
   3. Add MP-related functions.
   

Firmware Version: v1.00b12
Hardware Version: A1
Date: Fri, 31, Aug, 2012
KERNEL: 2.6.31, SVN Revision: 515, Date: Thu, 09 Aug 2012
Application: SVN Revision: 573, Date: Fri, 31 Aug 2012
WLAN Version: SVN Revision: 548, Date: Fri, 24 Aug 2012
CheckSum: 0x9C3C7A4A

Change:
   1. Change the default value of uplink as SSID=dlink and security=None
2. Update UI wording by D-Link new request
3. The signal strength of site survey list is changed from -65dbm to -80dbm.
4. For Mobile QRS, change site survey interval from 40s to 20s.

Fixed bugs:
   1. MACBOOK PRO NetBIOS name sometime can show "none"  We enhance the mechanism to avoid it would be "none for a long time but it might be "none" for a short time.

Firmware Version: v1.00b11
Hardware Version: A1
Date: Tue, 28, Aug, 2012
KERNEL: 2.6.31, SVN Revision: 515, Date: Thu, 09 Aug 2012
Application: SVN Revision: 561, Date: Tue, 28 Aug 2012
WLAN Version: SVN Revision: 548, Date: Fri, 24 Aug 2012
CheckSum: 0x85A90029

Change:
   1. Update GUI by SPEC v1.05 – Move HT 20/40 Coexistence from Wi-Fi Setup to Extended Wi-Fi Setup.

Fixed bugs:
   1. Mobile QRS V1.1 on iphone4 setup connect WEP/WPA2-sha connect  fail(password incorrect)
   2. Mobile QRS V1.1 on android mobile open fail (show connect fail)
3. Mobile QRS V1.1 Under Install page, FW still reports too many SSID. Many SSID are too weak to make a connection, but DAP-1320 still reports them to App.  Follow DIR-505, do not display those APs which RSSI are under -65dbm.
4. The behavior of HT20/40 Coexistence is contrary
5. When Network Name is empty, Device Info can't show any information

Firmware Version: v1.00b10
Hardware Version: A1
Date: Thu, 23, Aug, 2012
KERNEL: 2.6.31, SVN Revision: 515, Date: Thu, 09 Aug 2012
Application: SVN Revision: 536, Date: Thu, 23 Aug 2012
WLAN Version: SVN Revision: 532, Date: Thu, 16 Aug 2012
CheckSum: 0x225216ED

Change:
   1. Support Mobile QRS V1.1

Firmware Version: v1.00b09
Hardware Version: A1
Date: Thu, 16, Aug, 2012
KERNEL: 2.6.31, SVN Revision: 515, Date: Thu, 09 Aug 2012
Application: SVN Revision: 528, Date: Wed, 15 Aug 2012
WLAN Version: SVN Revision: 532, Date: Thu, 16 Aug 2012
CheckSum: 0xAF4973B8

Change:
   1. Update GUI by SPEC v1.04
   
Fixed bugs:
   1. If there is a space or spaces within Root AP's SSID, DUT could not connect successfully to Root AP. (Setting by Wizard is failed but Wi-Fi Setup is fine)
   2. IPV6 autoconfigureation mode  status page show "none"

Might be fixed bugs:
   1. Uplink failed issue: If there is no data between DUT and Root AP for a long time, the uplink would not work anymore.
    We just received Atheros's patch and then apply it. It could not be duplicated in about one hour test and now need your help to double confirm.

Known issues:
   1. NO language pack at this stage.


Firmware Version: v1.00b08
Hardware Version: A1
Date: Fri, 10, Aug, 2012
KERNEL: 2.6.31, SVN Revision: 515, Date: Thu, 09 Aug 2012
Application: SVN Revision: 518, Date: Fri, 10 Aug 2012
WLAN Version: SVN Revision: 517, Date: Fri, 10 Aug 2012
CheckSum: 0x9B7B9449

Change:
   1. Update GUI by D-Link request.
   2. Update LED behavior by D-Link new LED definition.

Fixed bugs:
   1. static/auto configuration mode: wireless client of repeater not access to router WAN site IPv6 resource.

Known issues:
   1. NO language pack at this stage.
   2. Uplink failed issue: If there is no data between DUT and Root AP for a long time, the uplink would not work anymore.


Firmware Version: v1.00b07
Hardware Version: A1
Date: Wed, 1, Aug, 2012
KERNEL: 2.6.31, SVN Revision: 475, Date: Thu, 26 Jul 2012
Application: SVN Revision: 500, Date: Wed, 01 Aug 2012
WLAN Version: SVN Revision: 499, Date: Tue, 31 Jul 2012
CheckSum: 0xB5211C42

Change:
   1. Officially add DHCP Server mechanism.

Fixed bugs:
   1. LED still solid green when repeater connected to router and router not enable DHCP server.
   2. link-local: user get "No response from host" message at D-link router IPv6 system check function UI after user at router IPv6 system check function to ping repeater link-local address.
       This issue is caused by routing at router side. Sometimes it sends the ICMP packets out through WAN not LAN and then could not find the link-local address which is physically located at LAN.
   3. auto configuration mode: sometimes not display DNS information at IPv6 status page.
   4. static/auto configuration mode: wireless client of repeater not access to router WAN site IPv6 resource.
   5. auto configuration mode: router WAN site station can't ping or access DUT web UI.

Known issues:
   1. NO language pack at this stage.
   2. Uplink failed issue: If there is no data between DUT and Root AP for a long time, the uplink would not work anymore.


Firmware Version: v1.00b06beta01
Hardware Version: A1
Date: Thu, 26, Jul, 2012
KERNEL: 2.6.31, SVN Revision: 475, Date: Thu, 26 Jul 2012
Application: SVN Revision: 479, Date: Thu, 26 Jul 2012
WLAN Version: SVN Revision: 433, Date: Wed, 18 Jul 2012
CheckSum: 0x451670A6

Change:
   1. Add DHCP Server mechanism by D-Link request


Firmware Version: v1.00b06
Hardware Version: A1
Date: Thu, 26, Jul, 2012
KERNEL: 2.6.31, SVN Revision: 475, Date: Thu, 26 Jul 2012
Application: SVN Revision: 479, Date: Thu, 26 Jul 2012
WLAN Version: SVN Revision: 433, Date: Wed, 18 Jul 2012
CheckSum: 0x10C4DC98

Change:
   1. Update GUI by SPEC v1.03R
   2. Update the pictures of Setup Wizard by D-Link request.
   3. Update LED behavior by D-Link new definition.
   4. Base on new translated string table to update some multi-language strings at Setup Wizard.

Fixed bugs:
   1. String to lack in wizard
   2. Ipad can not get IP(169.XX.XX.XX) when repeater is defalut
       iPad would disassociate every 1 minutes by itself at this condition (Could not get IP by running DHCP client). Because this behavior is initialized by iPad, this bug should not actually be a bug and please close it.

Known issues:
   1. NO language pack at this stage.
   2. IPv6 relay issue: Client's IPv6 packets to Root AP would be dropped frequently.


Firmware Version: v1.00b05
Hardware Version: A1
Date: Thu, 5, Jul, 2012
KERNEL: 2.6.31, SVN Revision: 342, Date: Thu, 21 Jun 2012
Application: SVN Revision: 414, Date: Thu, 05 Jul 2012
WLAN Version: SVN Revision: 414, Date: Thu, 05 Jul 2012
CheckSum: 0x81D82C40

Change:
   1. Change flash size from 4M to 8M
   2. Add D-Link new recovery FW
   
Fixed bugs:
   1. The next step did not respond (next button to no effect) at defalut using  wizard WPS
   2. Sometime not search SSID in wizard manual mode
   3. Sometime unable using LNMR or Bonjour login page
   4. Status page display error in browser IE8
   5. Transmit power display string and help not the same
   6. Reboot new button is always displayed on the page
   7. Status page  string to lack "Wi-Fi Clinet list :" in extended wi-fi network item
   8. When wireless clinet get ip but no display ip address in status page at extended wi-fi network item
   9. Password unlimited character at wizard manual setting exended wi-fi password  
   10. When WPS connect router finish and can go to internet but can not login repeater GUI(using IP ro LNMR)
   11. When restore to defalut, wireless client unable again connect ,must unplug power
   12. Often set finish reboot after can not login page
   13. SSID and Password is correct but Sometime can not connect and WPS(PBC) to fail

Unfixed bugs:
   1. String to lack in wizard
   2. Ipad can not get IP(169.XX.XX.XX) when repeater is defalut

Known issues:
   1. NO language pack at this stage.


Firmware Version: v1.00b04
Hardware Version: A1
Date: Wed, 13, Jun, 2012
KERNEL: 2.6.31, SVN Revision: 229, Date: Fri, 25 May 2012
Application: SVN Revision: 313, Date: Wed, 13 Jun 2012
WLAN Version: SVN Revision: 304, Date: Wed, 13 Jun 2012
CheckSum: 0xB2D457CA

Change:
   1. Correct FW naming rule.
   2. Update GUI by SPEC v1.02
   
Known issues:
   1. NO language pack at this stage.

NOTE:
   1. This FW include DHCP BROADCAST/UNICAST patch, please help verify it.


Firmware Version: v1.00NAb03
Hardware Version: A1
Date: Wed, 30, May, 2012
KERNEL: 2.6.31, SVN Revision: 229, Date: Fri, 25 May 2012
Application: SVN Revision: 239, Date: Wed, 30 May 2012
WLAN Version: SVN Revision: 66, Date: Wed, 09 May 2012
CheckSum: 0x08082F3D

Note:
   1. First release with correct HW PCB
   

Firmware Version: v1.00NAb02
Hardware Version: A1
Date: Tue, 22, May, 2012
KERNEL: 2.6.31, SVN Revision: 3, Date: Thu, 19 Apr 2012
Application: SVN Revision: 221, Date: Wed, 23 May 2012
WLAN Version: SVN Revision: 66, Date: Wed, 09 May 2012
CheckSum: 0x548CD8CF

Fixed bugs:
   1. WPS on AP Client side do not work.
   2. Firmware.htm -> Check Now button do not work.
   
Known issues:
   1. NO language pack at this stage.


Firmware Version: v1.00NAb01
Hardware Version: A1
Date: Wed, 16, May, 2012
KERNEL: 2.6.31, SVN Revision: 3, Date: Thu, 19 Apr 2012
Application: SVN Revision: 191, Date: Thu, 17 May 2012
WLAN Version: SVN Revision: 66, Date: Wed, 09 May 2012
CheckSum: 0x00FBD62D

Known issues:
   1. WPS on AP Client side do not work.
   2. Firmware.htm -> Check Now button do not work.
   3. NO language pack at this stage.

Notes:
1. First release to pre-test to do FULL SCAN with DIR-615Ix sample


[Pondera]

Ho [...] acquistato il wireless range extender N300 dap 1320 per potenziare il segnale della mia vodafone station 2

Puoi effettuare facilmente il collegamento del DAP-1320 alla VS2 con la funzione di configurazione protetta Wi-Fi (WPS, Wi-Fi Protected Setup).

Segui questa procedura e al passo 2 seleziona WiFi>Collegamento semplificato WPS sul display della VS2 [fonte Guida Vodafone Station 2].

[giov0910]

Ho [...] acquistato il wireless range extender N300 dap 1320 per potenziare il segnale della mia vodafone station 2

Puoi effettuare facilmente il collegamento del DAP-1320 alla VS2 con la funzione di configurazione protetta Wi-Fi (WPS, Wi-Fi Protected Setup).

Segui questa procedura e al passo 2 seleziona WiFi>Collegamento semplificato WPS sul display della VS2 [fonte Guida Vodafone Station 2].

Grazie di cuore, era semplice ma bisognava saperlo. Risolto.

[Pondera]

la smatv tv vede il DAP-1320 ci accede tramite password (come gatewey e dns ho impostato l' ip del DAP-1320) ma dal DAP-1320 riesce a connettersi ad internet

L'ultima versione firmware sembra proprio risolvere un problema simile!

firmware DAP-1320 A1/A2 1.11 build 10 Beta 01 20131024.

Codice Seleziona Espandi


Firmware Version: ver1.11b10beta01
Firmware Date: Thu, 24, Oct, 2013
KERNEL: 2.6.31, SVN Revision: 1571, Date: Wed, 27 Mar 2013
Application: SVN Revision: 2528, Date: Wed, 23 Oct 2013
WLAN Version:  SVN Revision: 2539, Date: Thu, 24 Oct 2013
CheckSum: 0xE04719E5

Fixed bugs:
1. Samsung TV can't connect to internet when it gets ip


[Ammy]

al momento non mi funziona proprio il pc... appena posso provo a fare l' aggiornamento... solo che vi chiedo visto che il DAP 1320 non ha la porta lan e non posso collegarlo tramite cavo.. ...... come lo eseguo?

[Pondera]

Questo dispositivo è il primo del marchio sprovvisto di porta Ethernet LAN. Quindi l'aggiornamento firmware può essere portato a termine solo tramite un collegamento senza fili stabile. La procedura di aggiornamento è nelle domande frequenti che ho riportato nel 1° messaggio.

Inoltre consiglierei di assegnare prima un IP fisso al DAP-1320 da collegare a un router wireless con accesso da PC tramite ultima versione di Internet Explorer o Firefox con Java aggiornato.

Il nuovo firmware ha la nuova interfaccia minimale ed è consigliabile anche una reimpostare (reset) dei parametri di configurazione preselezionati (default), dal tastino sotto al dispositivo (nelle domande frequenti) o dalla configurazione web.

[flaker2]

ciao a tutti. complimenti per la completezza della pagina... nonostante tutto però e una basilare conoscenza delle reti non sono riuscito a risolvere un paio di problemi.  

ho un DAP-1320 (vers.hardware A1, firmware V 11.1) collegato con un Router DSL-2740B (vers.hardware F1, firmware EU-2.04)  distanza tra i 2 inferiore ai 3 metri, senza ostacoli rilevanti (muri molto spessi o elettrodomestici).

PROBLEMA:  ho notato che quando tento di accedere al dap-1320 tramite 192.168.1.x attraverso dispositivi Android o Linux non riesco a connettermi (sia tramite chrome che con mozzilla), mentre con Iphone o Windows riesco ad accedere.   è possibile che vi sia qualche bug con dispositivi android e/o linux???  

2- quando ci consigli di impostare un ip-statico al dispositivo, il dns deve essere necessariamente  l'ip del gateway?!?  perchè??  non posso impostare il dns primario che già è impostato nel router??  ad es. in dns di google  (8.8.8.8)    GRAZIE IN ANTICIPO

3-impostando l'ip statico sul DAP-1320 devo disabilitare il dhcp sul router?!?

[Pondera]

quando tento di accedere al dap-1320 tramite 192.168.1.x attraverso dispositivi Android o Linux non riesco a connettermi (sia tramite chrome che con mozzilla), mentre con Iphone o Windows riesco ad accedere.   è possibile che vi sia qualche bug con dispositivi android e/o linux?

Non credo. Svuota la cache dei browser comunque.
Probabilmente il DAP-1320 ha l'indirizzo IP assegnato dal dispositivo che nella rete svolge la funzione DHCP e semplicemente non hai individuto l'indirizzo IP 192.168.1.x giusto.
Come scritto a pag. 11 del manuale che trovi nel 1° messaggio di questa discussione, puoi accedere al DAP-1320 dal tuo programma di navigazione sulla rete, oltre che con l'indirizzo IP specifico, anche con:

http://dlinkap.local
http://dlinkapwxyz.local (in caso di DAP-1320 multipli nella stessa rete)

"wxyz" sono le ultime quattro cifre dell'indirizzo MAC del DAP-1320 indicate nella scheda di configurazione Wi-Fi.

quando ci consigli di impostare un ip-statico al dispositivo, il dns deve essere necessariamente  l'ip del gateway?!?  perchè??  non posso impostare il dns primario che già è impostato nel router??  ad es. in dns di google  (8.8.8.8)

L'IP statico è consigliabile per avere un indirizzo fisso durante l'aggiornamento firmware.

Per la navigazione sono indispensabili i DNS che si possono inserire in modo:
INDIRETTO - l'indirizzo IP della propria rete privata del modem router wireless che passa agli altri dispositivi o i DNS impostati o quelli automatici del fornitore ADSL;
DIRETTO - gli IP pubblici dei DNS (Google, OpenDNS o del fornitore ADSL).

impostando l'ip statico sul DAP-1320 devo disabilitare il dhcp sul router?

Meglio lasciare un solo dispositivo che assegna in automatico gli IP nella propria rete, di solito il modem router wireless.