DWA-182: Adattatore USB Wireless Dual Band AC 1200 (Broadcom & Realtek)

Aperto da Pondera, 17 Gennaio 2013, 11:28:56

Stampa
Vai giù Pagine 1 2 3 4
Azioni

doc octopus

#40
06 Novembre 2014, 14:27:42
windows 8.1 installato su un Asus N53 (originariamente con Win7).

Lentezza nell'aprire le pagine e disconnessioni, sia a 2,4 che a 5 ghz. Con l'ultimo driver non ufficiale è molto più stabile.

E' collegato con un Netgear R7500.

Pondera

#41
06 Novembre 2014, 16:09:35
Ottimo! Grazie per il riscontro.
A questo punto appena verifico nuovamente i numeri di versione dei driver Realtek realtivi alle edizioni inferiori di Windows 8.x, inserisco il collegamento ai driver Realtek nel 1° messaggio.

Pondera

#42
07 Novembre 2014, 17:11:53
Date le richieste pubblicato nel 1° messaggio ultimo driver [Edimax Installer] DWA-182 C1 Realtek v1026.13.0625.2014 2014/07/30.

Carciofone

#43
07 Novembre 2014, 17:47:00
Bravo Pondera!
Questo driver è in grado di funzionare con ben 18 modelli di schede D-Link USB con chipset Realtek e con oltre un centinaio di schede di moltissimi produttori, compresi Asus, Linksys, Belkin, Netgear ...

Pondera

#44
08 Novembre 2014, 07:39:03
Microsoft Virtual WiFi Miniport Adapter

Il driver Realtek installato tramite il programma di utilità, abilita in automatico (se è installato manualmente non viene abilitata) la possibilità di Windows di usare la scheda adattatore senza fili come punto di accesso installando fra le periferiche l'adattatore WiFi virtuale del sistema operativo. Per i dettagli qui.
Nel caso non servisse, per disabilitare questa funzione, mandare in esecuzione il prompt dei comandi in finestra come amministratore e:

Fonte Microsoft Community
Citazione di: 'Franco Leuzzi'Nella finestra digita:

netsh wlan set hostednetwork mode=disallow

e dai invio.
Chiudi il prompt.

doc octopus

#45
09 Novembre 2014, 20:50:38
provato l'ultimo driver edimax, terribile, si disconnette in continuazione. molto meglio il precedente, che finora non mi ha mai dato problemi

Carciofone

#46
10 Novembre 2014, 10:00:09
Ohibò!
Con che router?
Hai verificato le impostazioni avanzate del driver come sono messe?

doc octopus

#47
02 Gennaio 2015, 11:00:47
Buon anno a tutti e scusate il ritardo con il quale rispondo, ma l'occasione di rifare la prova è arrivata con un format del pc.
Al primo tentativo ho rifatto lo stesso errore di due mesi fa, cioè ho installato i due driver in sequenza e, con il più recente, continuavo ad avere gli stessi problemi. Invece eliminando il driver vecchio prima e poi installando il nuovo dopo i problemi sono spariti. Adesso lo testo qualche giorno e poi riferirò.

edit: dopo alcune prove segnalo che continuo ad avere alcuni problemi con l'ultima release edimax, il più fastidioso è il blu screen con reboot del pc. A questo si aggiunge che non riesco a connettere il pc a 2,4 GHz al Netgear R7500 (chipset Qualcomm-Atheros), mentre con l'Asus rt-ac87u (broadcomm) non ci sono problemi.

Carciofone

#48
03 Gennaio 2015, 08:43:24
Attenzione: segnalo due nuovi pacchetti driver per Windows, Mac OSx e Linux di cui verificare la compatibilità con la DWA-182 Hw v. Cx provenienti dal produttore Edimax.

Driver Windows (XP\Vista\7\8.1) v. 1.0.0.9: download
Driver Windows (XP\Vista\7\8.1) v. 1.0.1.6: download

Driver Mac OSX v. 1.0.1.6: download

Driver Linux v. 1.0.1.6: download

doc octopus

#51
04 Gennaio 2015, 10:44:07
si, li avevo già scaricati dal sito edimax e, per sicurezza, ho controllato il file .inf

Carciofone

#52
27 Marzo 2015, 08:16:37
ATTENZIONE:
Aggiunti al primo post i link di download di due nuovi pacchetti driver per le versioni A1 e C1 della scheda di fattura D-Link:
DWA-182 A1 V1.03s0035 2015/02/05 e DWA-182 C1 V3.03b04 2015/01/23

Pondera

#53
29 Marzo 2015, 07:47:15
Nota edizione DWA-182 C1 V3.03b04 2015/01/23 (Win XP/Vista/7/8/8.1-64 v1026.13.0625.2014 30/07/2014):

Citazione di: Pondera il 24 Marzo 2015, 13:20:45
Codice Seleziona

DWA-182 Firmware Release Note


Firmware: v3.03b04
Hardware: C1
Date: 23, Jan, 2015


Driver:         
XP/XP64:        1026.13.0625.2014
Vista/Vista-64:        1026.13.0625.2014
Win7/Win7-64:        1026.13.0625.2014
Win8/Win8-64:        1026.13.0625.2014
Win8.1/Win8.1-64:    1026.13.0625.2014

Enhancements:
1. Update WHQL driver.

--------------------------------------------------

Firmware: v3.02b05
Hardware: C1
Date: 18, Mar, 2014

Driver:
XP/XP64:    1024.9.1219.2013
Vista/Vista-64:    1024.9.1219.2013
Win7/Win7-64:    1024.9.1219.2013
Win8/Win8-64:    1024.9.1219.2013
Win8.1/Win8-64:    1026.4.1023.2013


Problems Resolved:
Fix Wizard incorrect page information.
(1) When changing USB mode, the connection will be re-connected.
(2) When changing USB mode, the utility will disappear during 10s-15s.
(3) XP/XP64 do not support utility, so users can't use the utility to creat e the WPS connection.
(4) Win8 remove hardware icon might be disappear.
(5) When the security is Shared key, the configuration of Utility profile is not accordant.

Enhancements:
1. NA

--------------------------------------------------

21. v3.01b06beta01:
        Release Date: 11/06/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.22.132.0
        (2) Firmware (WlanDll.dll):XP:v1.42.133.50
                          Vista/Win7/Win8:1.54.133.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1024.4.0910.2013
            Vista/Vista-64:     1024.4.0910.2013
            Win7/Win7-64:        1024.4.0910.2013
            Win8/Win8-64:        1024.4.0910.2013
    Remark:
        (1) Modify swUSB tool for fix high memory state.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
        (4) Win8 remove hardware icon might be disappear.
        (5) When the security is Shared key, the configuration of Utility profile is not accordant.

20. v3.01b06:
        Release Date: 10/30/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.22.132.0
        (2) Firmware (WlanDll.dll):XP:v1.42.133.50
                          Vista/Win7/Win8:1.54.133.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1024.4.0910.2013
            Vista/Vista-64:     1024.4.0910.2013
            Win7/Win7-64:        1024.4.0910.2013
            Win8/Win8-64:        1024.4.0910.2013
    Remark:
        (1) Update WHQL Driver.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
        (4) Win8 remove hardware icon might be disappear.
        (5) When the security is Shared key, the configuration of Utility profile is not accordant.

19. v3.01b05:
        Release Date: 10/16/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.22.132.0
        (2) Firmware (WlanDll.dll):XP:v1.42.133.50
                          Vista/Win7/Win8:1.54.133.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1024.4.0910.2013
            Vista/Vista-64:     1024.4.0910.2013
            Win7/Win7-64:        1024.4.0910.2013
            Win8/Win8-64:        1024.4.0910.2013
    Remark:
        (1) Modify Brazil domain code value.
        (2) Modify String show in Connect Wizard.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
        (4) Win8 remove hardware icon might be disappear.
        (5) When the security is Shared key, the configuration of Utility profile is not accordant.

18. v3.01b04:
        Release Date: 10/09/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.21.132.0
        (2) Firmware (WlanDll.dll):XP:v1.41.133.50
                          Vista/Win7/Win8:1.53.133.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1024.4.0910.2013
            Vista/Vista-64:     1024.4.0910.2013
            Win7/Win7-64:        1024.4.0910.2013
            Win8/Win8-64:        1024.4.0910.2013
    Remark:
        (1) Modify  Taiwan domain code value.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
        (4) Win8 remove hardware icon might be disappear.
        (5) When the security is Shared key, the configuration of Utility profile is not accordant.

17. v3.01b03:
    Release Date: 10/02/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.21.132.0
        (2) Firmware (WlanDll.dll):XP:v1.40.133.50
                          Vista/Win7/Win8:1.52.133.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1024.4.0910.2013
            Vista/Vista-64:     1024.4.0910.2013
            Win7/Win7-64:        1024.4.0910.2013
            Win8/Win8-64:        1024.4.0910.2013
    Remark:
        (1) update driver for modify domain code show in Utility.
        (2) Add new flow page for use manually to establish connect.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
        (4) Win8 remove hardware icon might be disappear.
        (5) When the security is Shared key, the configuration of Utility profile is not accordant.

16. v3.01b02:
    Release Date: 06/25/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.19.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.7.0408.2013
            Vista/Vista-64:     1023.7.0408.2013
            Win7/Win7-64:        1023.7.0408.2013
            Win8/Win8-64:        1023.7.0408.2013
    Remark:
        (1) update WHQL driver.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
        (4) Win8 remove hardware icon might be disappear.
        (5) When the security is Shared key, the configuration of Utility profile is not accordant.

15. v3.01b01:
    Release Date: 05/17/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.19.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.7.0408.2013
            Vista/Vista-64:     1023.7.0408.2013
            Win7/Win7-64:        1023.7.0408.2013
            Win8/Win8-64:        1023.7.0408.2013
    Remark:
        (1) Update Driver for fix DFS+EN300.

    Fix bug:
        (1) There are spaces at the front or the end in password can not create WEP connection.
        (2) Fix driver crash.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
        (4) Win8 remove hardware icon might be disappear.
        (5) All drivers do not pass WHQL.

14. v3.00b07:
    Release Date: 04/24/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.19.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.7.0408.2013
            Vista/Vista-64:     1023.7.0408.2013
            Win7/Win7-64:        1023.7.0408.2013
            Win8/Win8-64:        1023.7.0408.2013
    Remark:
        (1) Update Driver for fix DFS+EN300.

    Fix bug:
        (1) There are spaces at the front or the end in password can not create WEP connection.
        (2) Fix driver crash.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
        (4) Win8 remove hardware icon might be disappear.
        (5) All drivers do not pass WHQL.

13. v3.00b06:
    Release Date: 03/05/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.19.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Fix bug:
        (1) Remove utility shortcut on XP.

    Known Issue:
        (1) When changing USB mode, the connection will be re-connected.
        (2) When changing USB mode, the utility will disappear during 10s-15s.
        (3) WPS can not work on XP.
        (4) Win8 remove hardware icon might be disappear.

12. v3.00b05:
    Release Date: 03/04/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.19.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Remark:
        (1) Update .cat file to pass WHQL

    Known Issue:
        (2) When changing USB mode, the connection will be re-connected.
        (3) When changing USB mode, the utility will disappear during 10s-15s.
        (4) WPS can not work on XP.
        (5) Win8 remove hardware icon might be disappear.

11. v3.00b04:
    Release Date: 02/22/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.19.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Remark:
        (1) Sign installshield execution file.

    Known Issue:
        (1) All drivers do not pass WHQL.
        (2) When changing USB mode, the connection will be re-connected.
        (3) When changing USB mode, the utility will disappear during 10s-15s.
        (4) WPS can not work on XP.
        (5) Win8 remove hardware icon might be disappear.

10. v3.00b03:
    Release Date: 02/20/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.19.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Fix bug:
        (1) WPS2.0 fail.
    Remark:
        (1) Update driver.
    Known Issue:
        (1) All drivers do not pass WHQL.
        (2) When changing USB mode, the connection will be re-connected.
        (3) When changing USB mode, the utility will disappear during 10s-15s.
        (4) WPS can not work on XP.
        (5) Win8 remove hardware icon might be disappear.

9. v3.00b02:
    Release Date: 02/07/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.19.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Fix bug:
        (1) WPS2.0 fail.
    Remark:
        (1) Update driver.
        (2) Change product description.
    Known Issue:
        (1) All drivers do not pass WHQL.
        (2) When changing USB mode, the connection will be re-connected.
        (3) When changing USB mode, the utility will disappear during 10s-15s.
        (4) WPS can not work on XP.
        (5) Win8 remove hardware icon might be disappear.

8. v3.00b01:
    Release Date: 01/31/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.18.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Fix bug:
        (1) Fixed 5G mode - Utility will disappear and appear frequently during the connection.
        (2) Utility - Error message pop-up in Windows XP.
        (3) Incorrect information in Connect Wizard and tip of Tray Icon.
    Remark:
        (1) Remove the utility in XP.
        (2) Change CD version to v3.00 by Dlink request.
    Known Issue:
        (1) All drivers do not pass WHQL.
        (2) When changing USB mode, the connection will be re-connected.
        (3) When changing USB mode, the utility will disappear during 10s-15s.
        (4) WPS can not work on XP.

7. v1.00b07:
    Release Date: 01/28/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.17.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Remark:
        (1) Update SwUSB tool to switch to USB3.0.
        (2) Close CheckUSB tool before hot-plug USB dongle.
    Known Issue:
        (1) All drivers do not pass WHQL.
        (2) When changing USB mode, the connection will be re-connected.
        (3) When changing USB mode, the utility will disappear during 10s-15s.
        (4) For changing USB mode, it has to use WZC to connect on XP.

6. v1.00b06:
    Release Date: 01/25/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.17.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Remark:
        (1) Change the Model name.
        (2) Change PID/VID.
    Fix bug:
        (1) USB can not switch to Usb 3.0 mode when connecting to the ac router.

    Known Issue:
        (1) All drivers do not pass WHQL.
        (2) When changing USB mode, the connection will be re-connected.
        (3) When changing USB mode, the utility will disappear during 10s-15s.
        (4) For changing USB mode, it has to use WZC to connect on XP.

5. v1.00b05:
    Release Date: 01/15/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.16.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.5.0116.2013
            Vista/Vista-64:     1023.5.0116.2013
            Win7/Win7-64:        1023.5.0116.2013
            Win8/Win8-64:        1023.5.0116.2013
    Remark:
        (1) Update driver.
        (2) Disable device advanced property "Wireless Mode" page

    Known Issue:
        (1) All drivers do not pass WHQL.
        (2) Can not scan channel 52 ~ 64

4. v1.00b04:
    Release Date: 01/03/2013
    Component Version:
        (1) Utility (wirelesscm.exe):5.16.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.3.1203.2012
            Vista/Vista-64:     1023.3.1203.2012
            Win7/Win7-64:        1023.3.1203.2012
            Win8/Win8-64:        1023.4.1218.2012
    Remark:
        (1) Fixed When 5G Channel Width select 20/40/80Mhz unable to connect.

    Known Issue:
        (1) All drivers do not pass WHQL.

3. v1.00b03:
    Release Date: 12/28/2012
    Component Version:
        (1) Utility (wirelesscm.exe):5.16.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.3.1203.2012
            Vista/Vista-64:     1023.3.1203.2012
            Win7/Win7-64:        1023.3.1203.2012
            Win8/Win8-64:        1023.4.1218.2012
    Remark:
        (1) Update Drivers.
        (2) Change PID/VID.
        (3) Change Driver display name.
        (4) Change Model name to DWA-180.

    Known Issue:
        (1) All drivers do not pass WHQL.

2. v1.00b02:
    Release Date: 12/12/2012
    Component Version:
        (1) Utility (wirelesscm.exe):5.16.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.2.1121.2012
            Vista/Vista-64:     1023.2.1121.2012
            Win7/Win7-64:        1023.2.1121.2012
            Win8/Win8-64:        1023.2.1121.2012
    Remark:
        (1) Modify Device description.
        (2) Modify PID/VID value.
        (3) The WZC tray icon in Win8 is not correct if DWA-182 connects to
            the AP which security is WEP.
    Known Issue:
        (1) All drivers do not pass WHQL.

1. v1.00b01:
    Release Date: 11/29/2012
    Component Version:
        (1) Utility (wirelesscm.exe):5.15.132.0
        (2) Firmware (WlanDll.dll):XP:v1.29.132.50
                          Vista/Win7/Win8:1.45.132.60
        (3) InstallShield: 2012
        (4) Driver: XP/XP64:        1023.2.1121.2012
            Vista/Vista-64:     1023.2.1121.2012
            Win7/Win7-64:        1023.2.1121.2012
            Win8/Win8-64:        1023.2.1121.2012
    Remark:
        (1) First Release.
    Known Issue:
        (1) Device description is not correct.
        (2) PID/VID value are not correct.
        (3) The WZC tray icon in Win8 is not correct if DWA-182 connects to
            the AP which security is WEP.


P.S. Il file netrtwlanu_Non-Coin.inf contiene anche le informazioni per i modelli di altre marche basati su Realtek.
P.P.S. Sono state parificate alla versione corrente del driver per Windows 8.1 tutti gli altri driver per i sistemi Windows precedenti.

Pondera

#54
30 Marzo 2015, 09:55:55
Nota edizione DWA-182 A1 V1.03s0035 2015/02/05 (Win XP/7/8/8.1-64 v6.30.145.30 2013/02/28 & Vista-64 v6.31.145.1 2013/03/07):

Codice Seleziona

DWA-182 Windows Driver Release Note


Utility: v1.03s0035
Hardware: A1
Date: 05, Feb, 2015

Driver:
    XP x86/x64: 6.30.145.30
    Vista x86/x64: 6.31.145.1
    Win7 x86/x64: 6.30.145.30
    Win8 x86/x64: 6.30.145.30
    Win8.1 x86/x64: 6.30.145.30

Problems Resolved:
Fixed UI can't run without dot net2.0

Enhancements:
Win8.1 x86/x64 support

--------------------------------------------------------

Utility: V1.02 (Build523-S0032) for beta
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.48
    Windows 7 x64 –6.30.145.48
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526

Date: 2014/04/02
-----------------------------------------------------------------------------------------------------------
1. Fixed Ad-hoc can't connect with security type WPA2-Personal issue under win7.
2. Modified default ad-hoc channel to 6.
------------------------------------------------------------------------------------------------------------


Utility: V1.02 (Build523-S0031) for beta
Driver:
    Windows 2000/XP x86 –6.30.145.48
    Windows XP x64 –6.30.145.48
    Windows 7 x86 –6.30.145.48
    Windows 7 x64 –6.30.145.48
    Windows 8 x86 –6.30.145.48
    Windows 8 x64 –6.30.145.48
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/10/25
-----------------------------------------------------------------------------------------------------------
1. Fixed with some 802.11mode, BCM43526 WPS cannot successful
------------------------------------------------------------------------------------------------------------


Utility: V1.02 (Build523-S0030)
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.30(WHQL passed)
    Windows 7 x64 –6.30.145.30(WHQL passed)
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/07/10
-----------------------------------------------------------------------------------------------------------
1. Update Utility Version to V1.02
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0029)
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.30(WHQL passed)
    Windows 7 x64 –6.30.145.30(WHQL passed)
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/06/05
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013060068: [Vista/win7/win8] After WPS successful, DUT did not auto connect to the AP
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0028)
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.30(WHQL passed)
    Windows 7 x64 –6.30.145.30(WHQL passed)
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/06/05
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013060068: [Vista/win7/win8] After WPS successful, DUT did not auto connect to the AP
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0027)
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.30(WHQL passed)
    Windows 7 x64 –6.30.145.30(WHQL passed)
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/05/31
-----------------------------------------------------------------------------------------------------------
1. Update all WHQL drivers
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0026)
Driver:
    Windows 2000/XP x86 –6.30.145.30
    Windows XP x64 –6.30.145.30
    Windows 7 x86 –6.30.145.30
    Windows 7 x64 –6.30.145.30
    Windows 8 x86 –6.30.145.30
    Windows 8 x64 –6.30.145.30
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/05/27
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013050514: [All OS] when WPS process, the LED did not fast blink
2. Fixed BTD2013050515: [All OS] After doing WPS, the LED will not fast blink when data is transferring
3. Fixed BTD2013050654: [All OS] WPS successful, LED did not soild for 5 sec.
4. Fixed BTD2012071059: When WPS fail, LED will on for 5 sec. (XP/Win7)
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0025)
Driver:
    Windows 2000/XP x86 –6.30.145.30
    Windows XP x64 –6.30.145.30
    Windows 7 x86 –6.30.145.30
    Windows 7 x64 –6.30.145.30
    Windows 8 x86 –6.30.145.30
    Windows 8 x64 –6.30.145.30
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/05/23
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013050555: ANIWConnService.exe have memory leak problem
2. Fixed BTD2013041265: When DUT pluged and bootup the system, the UI can't get correct reg doamin value.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build513-S0024)
Driver:
    Windows 2000/XP x86 –6.30.145.30
    Windows XP x64 –6.30.145.30
    Windows 7 x86 –6.30.145.30
    Windows 7 x64 –6.30.145.30
    Windows 8 x86 –6.30.145.30
    Windows 8 x64 –6.30.145.30
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/05/15
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013050042: ANIWConnService keep using CPU over 30%
2. Fixed BTD2013050508: [Win8] UI did not show channel and connect icon when connect to an AP.
3. Fixed BTD2013050646: [Win8] HW PBC did not launch "D-Link Wi-FI protected setup" to do the WPS PBC process
4. Fixed BTD2012071168: [Win7] During WPS process, the "Wireless connection manager" will be closed to avoid crash issue
5. Fixed BTD2012071178: [Win7] default did not launch UI after reboot, user need to launch it manually.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build325-S0023)
Driver:
    Windows 2000/XP x86 –6.30.145.30
    Windows XP x64 –6.30.145.30
    Windows 7 x86 –6.30.145.30
    Windows 7 x64 –6.30.145.30
    Windows 8 x86 –6.30.145.30
    Windows 8 x64 –6.30.145.30
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/04/22
-----------------------------------------------------------------------------------------------------------
1. Update XP/Vista/Win7/Win8 drivers
2. When doing WPS, open UI.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build1101-S0022)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1(WHQL passed)
    Windows Vista x64 –6.31.65.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/11/16
-----------------------------------------------------------------------------------------------------------
1. Update SDK to select 5GHz band in higher priority.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build1101-S0021)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1(WHQL passed)
    Windows Vista x64 –6.31.65.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/11/07
-----------------------------------------------------------------------------------------------------------
1. Fix BTD2012071178: [Vista/Win7] Fixed Admin issue.
2. Update SDK v6.30.10.7
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build914-S0020)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/18
-----------------------------------------------------------------------------------------------------------
1. Fix BTD2012071178: [Win7] default did not launch UI after reboot, user need to launch it manually.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build914-S0019)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/18
-----------------------------------------------------------------------------------------------------------
1. Update version V1.01
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build914-S0018)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/14
-----------------------------------------------------------------------------------------------------------
1. Set Russia ad-hoc mode range 1~13
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build907-S0017)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/14
-----------------------------------------------------------------------------------------------------------
1. Update vista WHQL driver 6.31.65.1
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build907-S0016)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/07
-----------------------------------------------------------------------------------------------------------
1. Fixed 5.1.11, 5.1.12, 5.1.13 in the Wi-Fi Protected Setup Test Plan_v2-0-8, the STAUT must be able to join an AP's WLAN through the AP's internal Registrar using PIN method when the AP's WSC State is Not Configured.
2. Fixed 5.1.7, 5.1.8 in the Wi-Fi Protected Setup Test Plan_v2-0-8, after one minutes under WPS PBC, push HW button again, it can't re-count time issue.
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build824-S0015)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/24
-----------------------------------------------------------------------------------------------------------
1. Adjust Signal value
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build814-S0014)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/16
-----------------------------------------------------------------------------------------------------------
1. Update vista driver 6.31.65.1
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build814-S0013)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/14
------------------------------------------------------------------------------------------------------------
1. Fix: [Win7] After doing WPS, sometimes UI crashed issue.
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build813-S0012)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/13
------------------------------------------------------------------------------------------------------------
1. Fix BTD2012080363: [Win7] After WPS successful, STA did not auto connect to AP
2. Fix: [Win7] After doing WPS, sometimes UI crashed issue.
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build809-S0011)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/10
------------------------------------------------------------------------------------------------------------
1. Fix BTD2012080354: WPS PIN can't work with Dual band AP
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build809-S0010)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/09
------------------------------------------------------------------------------------------------------------
1. Add XP/Win7 WHQL driver
2. Fix BTD2012070361: Adapter disappear after StandBy/Hibernate. (XP/Win7), modified VID/PID command
3. Fix BTD2012071178: Win7] When system UAC is ON, every time system bootup, it will popup UAC dialog when UI is going to launch-check S0009, Win7 x64 will run UI after reboot. Modified Win7 x64 can't run UI automatically after reboot.
4. Fix BTD2012070769: DWA-182 can't function normally on some machine with USB cradle.
5. Adjust Signal value
6. Add initial RSSI.
7. Please enter registry, and search SetIniRSSIF under HKEY_LOCAL_MACHINE folder.
Show initial RSSI: Hexadecimal: 100000
Don't show initial RSSI: Hexadecimal: 0
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build731-S0009)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/06
------------------------------------------------------------------------------------------------------------
1. Update Win7 driver 6.30.61.21
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build731-S0008)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.20
    Windows 7 x64 –6.30.61.20

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/03
------------------------------------------------------------------------------------------------------------
1. Fix BTD2012071671: Sometimes UI will shows warning message when we trying to scan AP with Wireless Connection Wizard. (XP/Win7)
Sol: Choose no security, exist the ssid, and high signal state.
2. Update XP driver 6.30.61.21
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build731-S0007)
Driver:
    Windows 2000/XP x86 –6.30.61.20
    Windows XP x64 –6.30.61.20
    Windows 7 x86 –6.30.61.20
    Windows 7 x64 –6.30.61.20

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/01
------------------------------------------------------------------------------------------------------------
1. Update driver 6.30.61.20
2. Change country code for US
3. Fix BTD2012071643: [Win7] When system's WLAN service restart, the UI's tray icon will disappear. This issue can't duplicate on S0007
4. Fix BTD2012071692: Setup's vendor/product name (must be D-Link DWA-182) is wrong at the first page and uninstall finish page.
5. Fix BTD2012071168: [Win7] After doing WPS (AP: security mode: None) successful, use UI to connect to another AP with WPA2 PSK AES will fail.
Sol: When doing WPS, close UI. If a user exits WPS, open UI.(This sol just for win7.)
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build727-S0006)
Driver:
    Windows 2000/XP x86 –6.30.61.17
    Windows XP x64 –6.30.61.17
    Windows 7 x86 –6.30.61.17
    Windows 7 x64 –6.30.61.17

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/27
------------------------------------------------------------------------------------------------------------
1. To modify advanced property of driver, reserving Roaming Decision, and the name of Roaming Decision is changed to Roaming Sensitivity.
2. Fix BTD2012070246: When AP set to HT80, STA connect to AP the UI's channel will show different channel.
3. Fix BTD2012071446: Sometimes UI will become slow or not responding. (XP x86/64)
4. Fix BTD2012071168: [Win7] After doing WPS successful, use UI to connect to another AP with WPA2 PSK AES will fail. This issue can't duplicate on S0006.
5. Fix BTD2012071495: [Win7] UI easy to crash when change adhoc WEP key index.
6. Fix BTD2012071579: [vista] English setup warning message looks strange
7. Fix BTD2012071619: The Wireless Connection Wizard flow was wrong. (XP/Win7)
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build724-S0005)
Driver:
    Windows 2000/XP x86 –6.30.61.17
    Windows XP x64 –6.30.61.17
    Windows 7 x86 –6.30.61.17
    Windows 7 x64 –6.30.61.17

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/24
------------------------------------------------------------------------------------------------------------
1. Add channel
2. Fix disable/enable problem
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build720-S0004)
Driver:
    Windows 2000/XP x86 –6.30.61.17
    Windows XP x64 –6.30.61.17
    Windows 7 x86 –6.30.61.17
    Windows 7 x64 –6.30.61.17

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/20
------------------------------------------------------------------------------------------------------------
1. Add DWA-182_A1_UI no vista strings: Traditional Chinese, Simplified Chinese, and Russia
2. Update driver 6.30.61.17
3. Removed channel, wait for new SDK
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build719-S0003)
Driver:
    Windows 2000/XP x86 –6.30.61.15
    Windows XP x64 –6.30.61.15
    Windows 7 x86 –6.30.61.15
    Windows 7 x64 –6.30.61.15

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/19
------------------------------------------------------------------------------------------------------------
1. Fix BTD2012070246: When AP set to HT40, STA connect to AP the UI's channel will show different channel
2. Fix BTD2012070252: Add Google Chrome/Toolbar Installation in setup
3. Fix BTD2012070285: HW PBC did not launch "D-Link wizard.exe" under Win7 x86/x64, UI need to be run on administrator mode
4. Fix BTD2012070419: set adhoc mode default speed to 11a/b/g
5. Fix BTD2012070557: set default bandwidth HT20/40
6. Add DWA-182_A1_UI no vista strings, except Traditional Chinese, Simplified Chinese, and Russia
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build718-S0002)
Driver:
    Windows 2000/XP x86 –6.30.61.15
    Windows XP x64 –6.30.61.15
    Windows 7 x86 –6.30.61.15
    Windows 7 x64 –6.30.61.15

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/18
------------------------------------------------------------------------------------------------------------
1. Add win7 Extensive Shortcut Menu
2. Fix bug 6: Use UI create a profile with none security, after active the profile's security become "shared"
3. Fix bug 12: Can't connect to AP with WPA2-PSK AES security mode by "Auto" passphrase setting. (XP x86/64)
4. Fix dual-band overlap issue in the PIN mode
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build0702-S0001)
Driver:
    Windows 2000/XP x86 –6.62.8.3
    Windows XP x64 –6.62.8.3
    Windows 7 x86 –6.62.8.3
    Windows 7 x64 –6.62.8.3

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/02
------------------------------------------------------------------------------------------------------------
1. DWA-182 string for vista: DWA-182 11ac USB dongle doesn't support Windows Vista OS, only supports Windows XP and Windows 7.
------------------------------------------------------------------------------------------------------------
 [First Release]
------------------------------------------------------------------------------------------------------------


Uniformati alle note edizioni C1 le diciture dei driver A1 nel 1° messaggio.
Aggiornati i collegamenti della sezione Documentazione.

andyonos

#55
20 Ottobre 2015, 17:45:21
Ho acquistato questa chiavetta ma scopro purtroppo solo ora che non esistono i driver per win 10 :-(  
Si hanno previsioni di rilascio?

Sandri

#56
21 Ottobre 2015, 09:28:37
Citazione di: andyonos il 20 Ottobre 2015, 17:45:21Ho acquistato questa chiavetta ma scopro purtroppo solo ora che non esistono i driver per win 10 :-(  
Si hanno previsioni di rilascio?

Ma che versione hardware hai? A1 o C1?

andyonos

#57
21 Ottobre 2015, 10:22:27
Citazione di: Sandri il 21 Ottobre 2015, 09:28:37
Citazione di: andyonos il 20 Ottobre 2015, 17:45:21Ho acquistato questa chiavetta ma scopro purtroppo solo ora che non esistono i driver per win 10 :-(  
Si hanno previsioni di rilascio?

Ma che versione hardware hai? A1 o C1?

ho la C1, ho visto i drivers universali Realteck proverò con quelli... consigli x l'installazione? Io la chiavetta non l'ho ancora tolta dalla scatola... grazie.

Sandri

#58
21 Ottobre 2015, 11:47:20
In realtà la scheda verrà riconosciuta con il suo marchio e modello. Dlink fa semplicemente un adattamento di questo driver per i suoi pacchetti driver.
A seconda del sistema operativo se sei connesso a internet il pc dovrebbe cercare e installare automaticamente i driver adatti al dispositivo su internet a meno che tale ricerca non sia stata disattivata nelle opzioni del pannello di controllo.
Poi se l'installer esegue tutto correttamente bene, altrimenti da Gestione hardware si seleziona la periferica sconosciuta e si procede manualmente alla selezione del driver per il proprio sistema che a quel punto verrà installato correttamente.
Da Windows 7 in avanti le utility proprietarie di gestione della scheda non servono più a nulla.

Carciofone

#59
26 Ottobre 2015, 17:52:05
Attenzione: aggiunto al primo post il link di download dell'ultimo driver Realtek RTL8192CU / RTL8188RU / RTL8192EU Wireless LAN drivers v.1027.4.1120.2014, 1030.1.0715.2015 - Realtek Wireless Lan drivers  - compatibile con DWA-182 C1 e C2 per i Sistemi Operativi Windows XP, Win 8, Win 7, Win 10, Win Vista, Win 8.1 (32 / 64 bit). Riconosce anche tutte queste altre schede wireless con chipset Realtek tra cui ben 16 modelli di schede USB D-Link.

Codice Seleziona
[Realtek.NTx86.6.3]
;; For 8192C RTK common ================================================================
%RTL8188cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BFF&PID_8160 ; RTK 88CU board for B/G/N      
%RTL8188cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8176 ; RTK 88CU board for B/G/N
%RTL8188cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8176&REV_0200&SS
%RTL8188cu_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_0BDA&PID_8177 ; RTK 88CU board for B/G
%RTL8188cu_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_0BDA&PID_8177&REV_0200&SS
%RTL8188ce_vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8170 ; RTK 88CE_VAU board for B/G/N
%RTL8188ce_vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8170&REV_0200&SS
%RTL8188ce_vau_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_0BDA&PID_817E ; RTK 88CE_VAU board for B/G
%RTL8188ce_vau_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_0BDA&PID_817E&REV_0200&SS
%RTL8192ce_vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817C ; RTK 92CE_VAU board for B/G/N
%RTL8192ce_vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817C&REV_0200&SS
%RTL8188cu_slim_solo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817A ; RTK slim_solo board for B/G/N
%RTL8188cu_slim_solo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817A&REV_0200&SS
%RTL8188cu_slim_solo_lc.DeviceDesc% = RTL8192cu_wow.ndi, USB\VID_0BDA&PID_819A ; LC slim solo for BGN.
%RTL8188cu_slim_solo_lc.DeviceDesc% = RTL8192cu_wow.ndi, USB\VID_0BDA&PID_819A&REV_0200&SS
%RTL8188cu_slim_combo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817B ; RTK slim_combo board for B/G/N
%RTL8188cu_slim_combo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817B&REV_0200&SS
%RTL8188ru.DeviceDesc% = RTL8192cu8188RU.ndi,USB\VID_0BDA&PID_817F ; RTK 88RU board for B/G/N
%RTL8188ru.DeviceDesc% = RTL8192cu8188RU.ndi,USB\VID_0BDA&PID_817F&REV_0200&SS
%RTL8188ru.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_317F ; RTK 88RU board for B/G/N
%RTL8188ru.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_317F&REV_0200&SS
%RTL8188cus_vl.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_818A ; RTK 88RU board for B/G/N
%RTL8188cus_vl.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_818A&REV_0200&SS
%RTL8188cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_103C&PID_1629 ; HP/Liteon board for B/G/N
%RTL8192cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8192
%RTL8192cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8178 ; RTK 92CU board for B/G/N
%RTL8192cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8178&REV_0200&SS
%RTK_AZ88vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_13D3&PID_3358 ; AZ 88CE_VAU for B/G/N
%RTK_AZ88vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_13D3&PID_3358&REV_0200&SS
%RTK_AZ88vau_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_13D3&PID_3359 ; AZ 88CE_VAU for B/G
%RTK_AZ88vau_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_13D3&PID_3359&REV_0200&SS
%RTK_AZ88cus.DeviceDesc% = RTL8192cu.ndi, USB\VID_13D3&PID_3357 ; AZ 88CUS for B/G/N
%RTK_AZ88cus.DeviceDesc% = RTL8192cu.ndi, USB\VID_13D3&PID_3357&REV_0200&SS
%RTL8188ctv.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_018A ; 8188CTV for BGN test only.

;; For 8192D RTK common ================================================================
%RTL8192du.DeviceDesc% = RTL8192du.ndi, USB\VID_0BDA&PID_8194
%RTL8192du.DeviceDesc%   = RTL8192du.ndi, USB\VID_0BDA&PID_8111
%RTL8192du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_0BDA&PID_8193&MI_00
%RTL8192du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_0BDA&PID_8193&REV_0000&MI_00
%RTL8192du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_0BDA&PID_8193&MI_01
%RTL8192du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_0BDA&PID_8193&REV_0000&MI_01
%RTL8192du2.DeviceDesc% = RTL8192du0.ndi, USB\VID_0BDA&PID_0193&MI_00
%RTL8192du2.DeviceDesc% = RTL8192du0.ndi, USB\VID_0BDA&PID_0193&REV_0000&MI_00
%RTL8192du3.DeviceDesc% = RTL8192du1.ndi, USB\VID_0BDA&PID_0193&MI_01
%RTL8192du3.DeviceDesc% = RTL8192du1.ndi, USB\VID_0BDA&PID_0193&REV_0000&MI_01

;; For 8723 RTK common ================================================================
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_872B
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_8725&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_8725&REV_0200&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_0723&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_0723&REV_0200&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_0724&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_0724&REV_0200&MI_02&SS
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_1724&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_1724&REV_0200&MI_02&SS
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_A724

;; For 8188E RTK common ================================================================
%RTL8188eu.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_8179
%RTL8188eu.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_8179&REV_0200&SS
%RTL8188ee_vau.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_A179
%RTL8188ee_vau.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_A179&REV_0200&SS
%RTL8188eu_0179.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_0179
%RTL8188eu_0179.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_0179&REV_0200&SS

;; For 8812A RTK common ================================================================
%RTL8812au.DeviceDesc% = RTL8812au.ndi, USB\VID_0BDA&PID_8812
%RTL8812au_881A.DeviceDesc% = RTL8812au_Vx.ndi, USB\VID_0BDA&PID_881A
%RTL8812au_881B.DeviceDesc% = RTL8812au_Vx.ndi, USB\VID_0BDA&PID_881B
%RTL8812au_881C.DeviceDesc% = RTL8812au_Vx.ndi, USB\VID_0BDA&PID_881C

;; For 8811A RTK common ================================================================
%RTL8811au.DeviceDesc% = RTL8811au.ndi, USB\VID_0BDA&PID_0811
%RTL8811au.DeviceDesc% = RTL8811au.ndi, USB\VID_0BDA&PID_A811
%RTL8811au.DeviceDesc% = RTL8811au.ndi, USB\VID_7392&PID_A813
%RTL8811au_Combo.DeviceDesc% = RTL8821auLC.ndi, USB\VID_0BDA&PID_0823&MI_02
%RTL8811au_Combo.DeviceDesc% = RTL8821auLC.ndi, USB\VID_0BDA&PID_0823&REV_0200&MI_02

;; For 8192E RTK common ================================================================
%RTL8192eu.DeviceDesc% = RTL8192eu.ndi, USB\VID_0BDA&PID_818B
%RTL8192eu.DeviceDesc% = RTL8192eu.ndi, USB\VID_0BDA&PID_818C&MI_02
%RTL8192eu.DeviceDesc% = RTL8192eu.ndi, USB\VID_0BDA&PID_818C&REV_0200&MI_02


;; For 8821B RTK common ================================================================
%RTL8821bu.DeviceDesc% = RTL8821bu.ndi, USB\VID_0BDA&PID_B821
%RTL8821bu.DeviceDesc% = RTL8821bu.ndi, USB\VID_0BDA&PID_B82B

;;----------------------------------------------------------------------------
;; For 8814A RTK common
;;----------------------------------------------------------------------------
%RTL8814au.DeviceDesc% = RTL8814au.ndi, USB\VID_0BDA&PID_8813

;;----------------------------------------------------------------------------
;; For 8723B RTK common
;;----------------------------------------------------------------------------
%RTL8723bu.DeviceDesc% = RTL8723bu.ndi, USB\VID_0BDA&PID_B720&MI_02
%RTL8723bu.DeviceDesc% = RTL8723bu.ndi, USB\VID_0BDA&PID_B720&REV_0200&MI_02


[PCI.NTx86.6.3]
;; For 8192C PCI ================================================================
%PCI.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_ED17
%PCI-2.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_4902
%PCI_Abocom88cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_AB2A
%PCI_Abocom92cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_AB2B
%PCI_Vencer.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_1201

;; For 8192D PCI ================================================================
%PCI_Abocom_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_AB2C&MI_00
%PCI_Abocom_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_AB2C&REV_0000&MI_00
%PCI_Abocom_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_AB2C&MI_01
%PCI_Abocom_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_AB2C&REV_0000&MI_01
%PCI_3_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_4903&MI_00
%PCI_3_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_4903&REV_0000&MI_00
%PCI_3_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_4903&MI_01
%PCI_3_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_4903&REV_0000&MI_01
%PCI_4_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_4904&MI_00
%PCI_4_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_4904&REV_0000&MI_00
%PCI_4_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_4904&MI_01
%PCI_4_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_4904&REV_0000&MI_01
%PCIWIDI_92DU.DeviceDesc% = RTL8192du.ndi, USB\VID_2019&PID_AB2D

;; For 8812A ABOCOM ================================================================
%PCI_AB30.DeviceDesc% = RTL8812au.ndi, USB\VID_2019&PID_AB30

;; For 8811A ABOCOM ================================================================
%PCI_AB32.DeviceDesc% = RTL8811au_PCI.ndi, USB\VID_2019&PID_AB32

[Sitecom.NTx86.6.3]
;; For 8192C SITECOM ================================================================
%Sitecom.DeviceDesc% = RTL8192cu.ndi, USB\VID_0DF6&PID_0052
%Sitecom_UN.DeviceDesc% = RTL8192cu.ndi, USB\VID_0DF6&PID_005C
%Sitecom_HG.DeviceDesc% = RTL8192cu.ndi, USB\VID_0DF6&PID_0061
;; For 8812A Sitecom ================================================================
%Sitecom_0074.DeviceDesc% = RTL8812au.ndi, USB\VID_0DF6&PID_0074
;; For 8811A Sitecom ================================================================
%Sitecom_007A.DeviceDesc% = RTL8811au.ndi, USB\VID_0DF6&PID_007A

[EDIMAX.NTx86.6.3]
;; For 8192C EDIMAX ================================================================
%EDIMAX.DeviceDesc% = RTL8192cu.ndi, USB\VID_7392&PID_7811
%EDIMAX300.DeviceDesc% = RTL8192cu.ndi, USB\VID_7392&PID_7822
;; For 8812A Edimax ================================================================
%Edimax_A822.DeviceDesc% = RTL8812au.ndi, USB\VID_7392&PID_A822
;; For 8811A Edimax ================================================================
%Edimax_AC600.DeviceDesc% = RTL8811au.ndi, USB\VID_7392&PID_A811
%Edimax_AC600.DeviceDesc% = RTL8811au.ndi, USB\VID_7392&PID_A812
;; For 8192D EDIMAX ================================================================
%EDIMAX5G.DeviceDesc% = RTL8192du_5G.ndi, USB\VID_0BDA&PID_E194

[ELECOM.NTx86.6.3]
;; For 8192C ELECOM ================================================================
%ELECOM_4009.DeviceDesc% = RTL8192cu.ndi, USB\VID_056E&PID_4009
;; For 8188E ELECOM ================================================================
%ELECOM_4008.DeviceDesc% = RTL8188eu.ndi, USB\VID_056E&PID_4008
;; For 8811A ELECOM ================================================================
%ELECOM_WDC433DU2.DeviceDesc% = RTL8811au.ndi, USB\VID_056E&PID_4007

[Abocom.NTx86.6.3]
;; For 8192C ABOCOM ================================================================
%Abocom.DeviceDesc% = RTL8192cu.ndi, USB\VID_07B8&PID_8189
%Abocom92cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_07B8&PID_8178

;; For 8192D ABOCOM ================================================================
%Abocom_92DU0.DeviceDesc% = RTL8192du0.ndi, USB\VID_07B8&PID_8193&MI_00
%Abocom_92DU0.DeviceDesc% = RTL8192du0.ndi, USB\VID_07B8&PID_8193&REV_0000&MI_00
%Abocom_92DU1.DeviceDesc% = RTL8192du1.ndi, USB\VID_07B8&PID_8193&MI_01
%Abocom_92DU1.DeviceDesc% = RTL8192du1.ndi, USB\VID_07B8&PID_8193&REV_0000&MI_01

;; For 8192E ABOCOM ================================================================
%Abocom_AB33.DeviceDesc% = RTL8192eu.ndi, USB\VID_2019&PID_AB33

;; For 8188E ABOCOM ================================================================
%Abocom_8179.DeviceDesc% = RTL8188eu.ndi, USB\VID_07B8&PID_8179

;; For 8812A ABOCOM ================================================================
%Abocom_8812.DeviceDesc% = RTL8812au.ndi, USB\VID_07B8&PID_8812

;; For 8811A ABOCOM ================================================================
%Abocom_0811.DeviceDesc% = RTL8811au.ndi, USB\VID_07B8&PID_0811

[Amigo.NTx86.6.3]
;; For 8192C AMIGO ================================================================
%Amigo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0EB0&PID_9071

[Hercules.NTx86.6.3]
;; For 8192C HERCULES ================================================================
%Hercules.DeviceDesc% = RTL8192cu.ndi, USB\VID_06F8&PID_E033
%Hercules-E035.DeviceDesc% = RTL8192cu.ndi, USB\VID_06F8&PID_E035

[DLink.NTx86.6.3]
;; For 8192C DLINK ================================================================
%DLink-1.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_330A
%DLink-2.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_3309
%DLink-3.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_3308
%DLink-4.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_3307
%DLink-5.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_330B

%DLink-DWA151.DeviceDesc% = RTL8192du.ndi, USB\VID_2001&PID_330C


%DLink_2001.DeviceDesc% = RTL8192eu.ndi, USB\VID_3312&PID_2001

;; For 8188E RTK common ================================================================
%DLINK_330F.DeviceDesc%   = RTL8188eu.ndi, USB\VID_2001&PID_330F
%DLINK_3310.DeviceDesc%   = RTL8188eu.ndi, USB\VID_2001&PID_3310
%DLINK_3311.DeviceDesc%   = RTL8188eu.ndi, USB\VID_2001&PID_3311

;; For 8812A DLINK ================================================================
%DLink-DWA183.DeviceDesc% = RTL8812auDLink.ndi, USB\VID_2001&PID_330E
%DLink-DWA182.DeviceDesc% = RTL8812auDLink.ndi, USB\VID_2001&PID_3313
%DLink_3315.DeviceDesc% = RTL8812auDLink.ndi, USB\VID_2001&PID_3315
%DLink_3316.DeviceDesc% = RTL8812auDLink.ndi, USB\VID_2001&PID_3316

;; For 8811A DLINK ================================================================
%DLink-DWA171.DeviceDesc% = RTL8811au.ndi, USB\VID_2001&PID_3314
%DLink_3318.DeviceDesc% = RTL8811au.ndi, USB\VID_2001&PID_3318

[Belkin.NTx86.6.3]
;; For 8192C BELKIN ================================================================
%Belkin.DeviceDesc% = Belkin.ndi, USB\VID_050D&PID_1102
%Belkin-2.DeviceDesc% = Belkin.ndi, USB\VID_050D&PID_2102
%Belkin-3.DeviceDesc% = Belkin.ndi, USB\VID_050D&PID_2103
%Belkin-4.DeviceDesc% = Belkin.ndi, USB\VID_050D&PID_1004

;; For 8192D BELKIN ================================================================
%Belkin-N600DB.DeviceDesc% = BelkinN600.ndi, USB\VID_050D&PID_110A
%Belkin-N450DB.DeviceDesc% = BelkinN450.ndi, USB\VID_050D&PID_1105
%Belkin-N300DB.DeviceDesc% = BelkinN300.ndi, USB\VID_050D&PID_120A

;; For 8812A BELKIN ================================================================
%Belkin-AC950.DeviceDesc% = RTL8812auBelkin.ndi, USB\VID_050D&PID_1109

[BUFFALO.NTx86.6.3]
;; For 8811A BUFFALO ================================================================
%Buffalo-WI-U2-433DM.DeviceDesc% = RTL8811au.ndi, USB\VID_0411&PID_0242 ;For Buffalo WI-U2-433DM

;; For 8812A BUFFALO ================================================================
%Buffalo_025D.DeviceDesc% = RTL8812au.ndi, USB\VID_0411&PID_025D ;For Buffalo WI-U3-866D

[Zyxel.NTx86.6.3]
;; For 8192C ZYXEL ================================================================
%Zyxel.DeviceDesc% = RTL8192cu.ndi, USB\VID_0586&PID_341F
;; For 8812A Zyxel ================================================================
%Zyxel_3426.DeviceDesc% = RTL8812au.ndi, USB\VID_0586&PID_3426

[ATKK.NTx86.6.3]
;; For 8192C ATKK ================================================================
%ATKK.DeviceDesc% = RTL8192cu.ndi, USB\VID_07AA&PID_0056

[TRENDnet.NTx86.6.3]
;; For 8192C TREDENT ================================================================
%TRENDnet.DeviceDesc% = RTL8192cu.ndi, USB\VID_20F4&PID_648B
%TRENDnet_2.DeviceDesc% = RTL8192cu.ndi, USB\VID_20F4&PID_624D

;; For 8192D TREDENT ================================================================
%TRENDnet_3_du.DeviceDesc% = RTL8192du.ndi, USB\VID_20F4&PID_664B

;; For 8812 TREDENT ================================================================
%TRENDnet_805B.DeviceDesc% = RTL8812au.ndi, USB\VID_20F4&PID_805B

;; For 8811A Trendnet ================================================================
%TRENDnet_804B.DeviceDesc% = RTL8811au.ndi, USB\VID_20F4&PID_804B

[Feixun.NTx86.6.3]
;; For 8192C FEXIUN ================================================================
%Feixun.DeviceDesc% = RTL8192cu.ndi, USB\VID_4855&PID_0090 ; Feixun 88CUS for B/G/N
%Feixun.DeviceDesc% = RTL8192cu.ndi, USB\VID_4855&PID_0091 ; Feixun 92CU for B/G/N

[NetweeN.NTx86.6.3]
;; For 8192C NETWEEN ================================================================
%NetweeN.DeviceDesc% = RTL8192cu.ndi, USB\VID_4856&PID_0091 ; Feixun 8188CUS for B/G/N

[XAVI.NTx86.6.3]
;; For 8192C XAVI ================================================================
%XAVI.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFF7 ; XAVI 88CUSlim solo for B/G/N
%XAVI.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFF9 ; XAVI 88CUSlim solo for B/G/N
%XAVI.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFFA ; XAVI 88CUSlim solo for B/G/N
%XAVI88cusc.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFF8 ; XAVI 88CUSlim combo for B/G/N
%XAVI88cusc.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFFB ; XAVI 88CUSlim combo for B/G/N
%XAVI88cusc.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFFC ; XAVI 88CUSlim combo for B/G/N

[Netgear.NTx86.6.3]
;; For 8192C NETGEAR ================================================================
;;%Netgear.DeviceDesc% = RTL8192cu.ndi, USB\VID_0846&PID_9041 ; Netgear 88CUSfor B/G/N

;; For 8812A Netgear ================================================================
;;%Netgear-A6200v2.DeviceDesc% = RTL8812au.ndi, USB\VID_0846&PID_9051

;; For 8811A Netgear ================================================================

[Oar_Inc.NTx86.6.3]
;; For 8192C OAR ================================================================
%Oar_Inc.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_AB2E

[ASUS.NTx86.6.3]
;; For 8192C ASUS ================================================================
%ASUS.DeviceDesc% = RTL8192cu.ndi, USB\VID_0B05&PID_17AB
%ASUS-2.DeviceDesc% = RTL8192cu.ndi, USB\VID_0B05&PID_17BA
%ASUS-17C0.DeviceDesc% = RTL8192cu.ndi, USB\VID_0B05&PID_17C0

;; For 8812A ASUS ================================================================
%ASUS_17D2.DeviceDesc% = RTL8812auASUS.ndi, USB\VID_0B05&PID_17D2

[HAWKING.NTx86.6.3]
;; For 8192C HAWKING ================================================================
%Hawking-1.DeviceDesc% = RTL8192cu.ndi, USB\VID_0E66&PID_0019
%Hawking-2.DeviceDesc% = RTL8192cu.ndi, USB\VID_0E66&PID_0020

;; For 8812A ASUS ================================================================
%Hawking_0022.DeviceDesc% = RTL8812au.ndi, USB\VID_0E66&PID_0022

;; For 8811A Hawking ================================================================
%Hawking_0023.DeviceDesc% = RTL8811au.ndi, USB\VID_0E66&PID_0023

[Compare.NTx86.6.3]
;; For 8192C COMPARE ================================================================
%Compare-1.DeviceDesc% = RTL8192cu.ndi, USB\VID_CDAB&PID_8010

[IO_DATA.NTx86.6.3]
;; For 8192C IO_DATA ================================================================
%IO_DATA_094c.DeviceDesc% = RTL8192cu.ndi, USB\VID_04BB&PID_094C
%IO_DATA_0950.DeviceDesc% = RTL8192cu.ndi, USB\VID_04BB&PID_0950

;; For 8812A IO_DATA ================================================================
%IO_DATA_0952.DeviceDesc% = RTL8812au.ndi, USB\VID_04BB&PID_0952

;; For 8811A IO_DATA ================================================================
%IO_DATA_AC433UA.DeviceDesc% = RTL8811au.ndi, USB\VID_04BB&PID_0953
%IO_DATA_0959.DeviceDesc% = RTL8811au_IO_DATA.ndi, USB\VID_04BB&PID_0959

[TPLINK.NTx86.6.3]
;; For 8192C TPLINK ================================================================
%TPLINK-0100.DeviceDesc% = RTL8192cu.ndi, USB\VID_2357&PID_0100

;; For 8812A TPLINK ================================================================
%TPLINK_0101.DeviceDesc% = RTL8812autplink.ndi, USB\VID_2357&PID_0101


[Logitec.NTx86.6.3]
;; For 8192C Logitec ================================================================
%Logitec_016D.DeviceDesc% = RTL8192cu.ndi, USB\VID_0789&PID_016D
;; For 8192D Logitec ================================================================
%Logitec.DeviceDesc% = RTL8192du_5G.ndi, USB\VID_0789&PID_0019

;; For 8812A Logitec ================================================================
%Logitec_016E.DeviceDesc% = RTL8812au.ndi, USB\VID_0789&PID_016E

[NEC.NTx86.6.3]
;; For 8812A NEC ================================================================
%NEC_0408.DeviceDesc% = RTL8812auNEC.ndi, USB\VID_0409&PID_0408

[WD.NTx86.6.3]
;; For 8812A WD ================================================================
%WD_0632.DeviceDesc% = RTL8812au.ndi, USB\VID_1058&PID_0632

[EnGenius.NTx86.6.3]
;; For 8812A EnGenius ================================================================
%EnGenius_0100.DeviceDesc% = RTL8812au.ndi, USB\VID_1740&PID_0100

[Linksys.NTx86.6.3]
;; For 8812A Linksys ================================================================
%Linksys_003F.DeviceDesc% = RTL8812auBelkin.ndi, USB\VID_13B1&PID_003F

[Amped.NTx86.6.3]
;; For 8812A Amped ================================================================
%Amped_9097.DeviceDesc% = RTL8812au.ndi, USB\VID_148F&PID_9097

[ACTIONTEC.NTx86.6.3]
;; For 8192D ACTIONTEC ================================================================
;%ScreenBeam.DeviceDesc% = Actiontec.ndi, USB\VID_1668&PID_8102

[Qihoo.NTx86.6.3]
Stampa
Vai su Pagine 1 2 3 4
Azioni
Licenza Creative Commons
Il contenuto dei messaggi del forum è distribuito con
Licenza Creative Commons Attribuzione Non commerciale 4.0
Tutti i marchi registrati citati appartengono ai legittimi proprietari