DWA-182: Adattatore USB Wireless Dual Band AC 1200 (Broadcom & Realtek)

[Carciofone]

Attenzione: segnalo il link di download dell'ultimo driver Realtek RTL8192CU / RTL8188RU / RTL8192EU Wireless LAN drivers v.1030.2.0731.2015 - Realtek Wireless Lan drivers  - compatibile con DWA-182 C1 e C2 per i Sistemi Operativi Windows XP, Win 8, Win 7, Win 10, Win Vista, Win 8.1 (32 / 64 bit). Riconosce anche tutte queste altre schede wireless con chipset Realtek tra cui ben 16 modelli di schede USB D-Link.

DOWNLOAD

Segnalo inoltre i nuovi driver originali D-Link per DWA-182 in versione:
 1) DWA-182 A1 v.1.04b02
 2) DWA-182 C1 v.3.05

[Carciofone]

Attenzione: disponibile il download dell'ultimo driver Realtek RTL8192CU / RTL8188RU / RTL8192EU Wireless LAN drivers v.1030.8.0203.2016 - Realtek Wireless Lan drivers  - compatibile con DWA-182 C1 e DWA-192 per i Sistemi Operativi Win 8, Win 7, Win 10, Win 8.1 (32 / 64 bit). Riconosce anche tutte queste altre schede wireless con chipset Realtek tra cui ben 16 modelli di schede USB D-Link, ragion per cui è da considerarsi un pacchetto driver di aggiornamento quasi universale.

[Carciofone]

Attenzione: disponibile il download dell'ultimo driver Realtek RTL8192CU / RTL8188RU / RTL8192EU Wireless LAN drivers v.1030.9.0303.2016 - Realtek Wireless Lan drivers  - compatibile con DWA-182 C1 e DWA-192 per i Sistemi Operativi Win 8, Win 7, Win 10, Win 8.1 (32 / 64 bit). Riconosce anche tutte queste altre schede wireless con chipset Realtek tra cui ben 16 modelli di schede USB D-Link, ragion per cui è da considerarsi un pacchetto driver di aggiornamento quasi universale.

[Carciofone]

Attenzione: disponibile il download dell'ultimo driver Realtek RTL8192CU / RTL8188RU / RTL8192EU Wireless LAN drivers v.1030.12.0526.2016 - Realtek Wireless Lan drivers  - compatibile con DWA-182 C1 e DWA-192 per i Sistemi Operativi Win 8, Win 7, Win 10, Win 8.1 (32 / 64 bit). Riconosce anche tutte queste altre schede wireless con chipset Realtek tra cui ben 16 modelli di schede USB D-Link, ragion per cui è da considerarsi un pacchetto driver di aggiornamento quasi universale.

NB: per sola installazione manuale!

[Pondera]

Ristrutturato tutto il 1° messaggio sulle informazioni della scheda tecnica revisione C1 e secondo l'ultimo standard del nostro forum.
Aggiornata la sezione Documentazione riguardante la C1.
Nella sezione Approfondimenti aggiunti scheda tecnica Realtek RTL8812AU, dati tecnici Broadcom BCM43526 ed elenco WikiDevi dei dispositivi USB che lo montano.



Note edizioni driver Linux DWA-182 C1 (RTL8812AU) v4.3.2_11100.20140411 2014/05/28.

D-Link

Codice Seleziona Espandi


DWA-182 C1 Wireless AC1200 Dual Band USB Adapter

Firmware Release Notes

Hardware: C1
Date: 2014/05/28
Driver: v4.3.2_11100.20140411

Enhancements:
(1) Modify install.sh file for install driver.
(2) On Linux, support only Linux kernel 2.6.18 ~ 3.10
(3) Support USB 2.0 ONLY

Problems Resolved:
NA

Known Issues:
NA


Realtek

Codice Seleziona Espandi


Product: RTL8812A USB Software Package - Linux Driver
Version: v4.3.2_11100.20140411

Release History:
v4.2.0_6952.20130315
1. First release.

v4.2.0_7054.20130328
1. Fix LED behavior

v4.2.2_7502.20130517
1. Support 11AC for STA.

v4.2.3_8123.20130705
1. Update PHY parameters to improve throughput.

v4.3.2_11100.20140411
1. To fix p2p issues
2. To improve throughput
3. To update FW

Description:
Realtek provides the solution for WLAN in hardware and software. The software package could be
adopted for Realtek RTL8812A USB WLAN series hardware on Linux based platforms.

Software Version:
RTL8812A USB Linux Driver Version: v4.3.2_11100.20140411

Hardware Supported:
● RTL8812AU

Platform Supported:
● Linux (kernel 2.6.18 ~ 3.10.10)
● Android 1.6 ~ 2.3, 4.0 ~ 4.4

CPU supported:
● x86
● ARM
● MIPS


[Pondera]

Pubblicato driver MAC DWA-182 C1 V1.03b01 UI 5.0.3 2017/01/12 (Mac OS 10.8/9/10/11/12 v1830.10).

Codice Seleziona Espandi


DWA-182 Wireless AC1200 Dual-Band USB Adapter

Verion: 1.03b01
Utility version: 5.0.3
Hardware: C1
Date: 2017/01/12

Driver
MacOS 10.8: 1830.10
MacOS 10.9: 1830.10
MacOS 10.10: 1830.10
MacOS 10.11: 1830.10
MacOS 10.12: 1830.10

Problem Resolved:
None

Enchancement:
1. Support MacOS Sierra (10.12).

---------------------------

Utility version: 5.0.1
Hardware: C1
Date: 2016/03/18

Driver
MacOS 10.7: 1830
MacOS 10.8: 1830
MacOS 10.9: 1830
MacOS 10.10: 1830
MacOS 10.11: 1830

Problem Resolved:
None

Enchancement:
1. Support MacOS 10.11 El Capitan.
2. User Interface enchancement.


[Pondera]

Pubblicato driver DWA-182 A1 V1.04b02 2015/10/20 (Win XP/7/8/8.1-64 v6.30.145.30 2013/02/28 & Vista-64 v6.31.145.1 2013/03/07).
Il driver Vista funziona con le altre versioni successive del S.O. e sembra funzionare con la rimozione sicura USB del sistema. Ma con USB Safely Remove se si rimuove e si riconnette dall'utilità (senza rimuovere fisicamente il dispositivo) viene riconosciuta come ulteriore periferica sconosciuta che necessita di driver d'installazione.

Codice Seleziona Espandi


DWA-182 Windows Driver Release Note

Version 1.04b02
Hardware: A1
Date: 2015/10/20

Driver:
Windows XP x86 - 6.30.145.30 (WHQL pass)
Windows XP x64 - 6.30.145.30 (WHQL pass)
Windows Vista x86 - 6.30.145.1 (WHQL pass)
Windows Vista x64 - 6.30.145.1 (WHQL pass)
Windows 7 x86 - 6.30.145.30 (WHQL pass)
Windows 7 x64 - 6.30.145.30 (WHQL pass)
Windows 8 x86 - 6.30.145.30 (WHQL pass)
Windows 8 x64 - 6.30.145.30 (WHQL pass)
Windows 8.1 x86 - 6.30.145.30 (WHQL pass)
Windows 8.1 x64 - 6.30.145.30 (WHQL pass)


Problems Resolved:

Enhancement:
Update D-Link digital signature

--------------------------------------------------------

Utility: v1.03s0035
Hardware: A1
Date: 05, Feb, 2015

Driver:
    XP x86/x64: 6.30.145.30
    Vista x86/x64: 6.31.145.1
    Win7 x86/x64: 6.30.145.30
    Win8 x86/x64: 6.30.145.30
    Win8.1 x86/x64: 6.30.145.30

Problems Resolved:
Fixed UI can't run without dot net2.0

Enhancements:
Win8.1 x86/x64 support

--------------------------------------------------------

Utility: V1.02 (Build523-S0032) for beta
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.48
    Windows 7 x64 –6.30.145.48
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526

Date: 2014/04/02
-----------------------------------------------------------------------------------------------------------
1. Fixed Ad-hoc can't connect with security type WPA2-Personal issue under win7.
2. Modified default ad-hoc channel to 6.
------------------------------------------------------------------------------------------------------------


Utility: V1.02 (Build523-S0031) for beta
Driver:
    Windows 2000/XP x86 –6.30.145.48
    Windows XP x64 –6.30.145.48
    Windows 7 x86 –6.30.145.48
    Windows 7 x64 –6.30.145.48
    Windows 8 x86 –6.30.145.48
    Windows 8 x64 –6.30.145.48
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/10/25
-----------------------------------------------------------------------------------------------------------
1. Fixed with some 802.11mode, BCM43526 WPS cannot successful
------------------------------------------------------------------------------------------------------------


Utility: V1.02 (Build523-S0030)
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.30(WHQL passed)
    Windows 7 x64 –6.30.145.30(WHQL passed)
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/07/10
-----------------------------------------------------------------------------------------------------------
1. Update Utility Version to V1.02
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0029)
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.30(WHQL passed)
    Windows 7 x64 –6.30.145.30(WHQL passed)
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/06/05
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013060068: [Vista/win7/win8] After WPS successful, DUT did not auto connect to the AP
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0028)
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.30(WHQL passed)
    Windows 7 x64 –6.30.145.30(WHQL passed)
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/06/05
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013060068: [Vista/win7/win8] After WPS successful, DUT did not auto connect to the AP
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0027)
Driver:
    Windows 2000/XP x86 –6.30.145.30(WHQL passed)
    Windows XP x64 –6.30.145.30(WHQL passed)
    Windows 7 x86 –6.30.145.30(WHQL passed)
    Windows 7 x64 –6.30.145.30(WHQL passed)
    Windows 8 x86 –6.30.145.30(WHQL passed)
    Windows 8 x64 –6.30.145.30(WHQL passed)
    Windows Vista x32 –6.31.145.1(WHQL passed)
    Windows Vista x64 –6.31.145.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/05/31
-----------------------------------------------------------------------------------------------------------
1. Update all WHQL drivers
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0026)
Driver:
    Windows 2000/XP x86 –6.30.145.30
    Windows XP x64 –6.30.145.30
    Windows 7 x86 –6.30.145.30
    Windows 7 x64 –6.30.145.30
    Windows 8 x86 –6.30.145.30
    Windows 8 x64 –6.30.145.30
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/05/27
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013050514: [All OS] when WPS process, the LED did not fast blink
2. Fixed BTD2013050515: [All OS] After doing WPS, the LED will not fast blink when data is transferring
3. Fixed BTD2013050654: [All OS] WPS successful, LED did not soild for 5 sec.
4. Fixed BTD2012071059: When WPS fail, LED will on for 5 sec. (XP/Win7)
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build523-S0025)
Driver:
    Windows 2000/XP x86 –6.30.145.30
    Windows XP x64 –6.30.145.30
    Windows 7 x86 –6.30.145.30
    Windows 7 x64 –6.30.145.30
    Windows 8 x86 –6.30.145.30
    Windows 8 x64 –6.30.145.30
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/05/23
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013050555: ANIWConnService.exe have memory leak problem
2. Fixed BTD2013041265: When DUT pluged and bootup the system, the UI can't get correct reg doamin value.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build513-S0024)
Driver:
    Windows 2000/XP x86 –6.30.145.30
    Windows XP x64 –6.30.145.30
    Windows 7 x86 –6.30.145.30
    Windows 7 x64 –6.30.145.30
    Windows 8 x86 –6.30.145.30
    Windows 8 x64 –6.30.145.30
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/05/15
-----------------------------------------------------------------------------------------------------------
1. Fixed BTD2013050042: ANIWConnService keep using CPU over 30%
2. Fixed BTD2013050508: [Win8] UI did not show channel and connect icon when connect to an AP.
3. Fixed BTD2013050646: [Win8] HW PBC did not launch "D-Link Wi-FI protected setup" to do the WPS PBC process
4. Fixed BTD2012071168: [Win7] During WPS process, the "Wireless connection manager" will be closed to avoid crash issue
5. Fixed BTD2012071178: [Win7] default did not launch UI after reboot, user need to launch it manually.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build325-S0023)
Driver:
    Windows 2000/XP x86 –6.30.145.30
    Windows XP x64 –6.30.145.30
    Windows 7 x86 –6.30.145.30
    Windows 7 x64 –6.30.145.30
    Windows 8 x86 –6.30.145.30
    Windows 8 x64 –6.30.145.30
    Windows Vista x32 –6.31.145.1
    Windows Vista x64 –6.31.145.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2013/04/22
-----------------------------------------------------------------------------------------------------------
1. Update XP/Vista/Win7/Win8 drivers
2. When doing WPS, open UI.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build1101-S0022)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1(WHQL passed)
    Windows Vista x64 –6.31.65.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/11/16
-----------------------------------------------------------------------------------------------------------
1. Update SDK to select 5GHz band in higher priority.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build1101-S0021)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1(WHQL passed)
    Windows Vista x64 –6.31.65.1(WHQL passed)

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/11/07
-----------------------------------------------------------------------------------------------------------
1. Fix BTD2012071178: [Vista/Win7] Fixed Admin issue.
2. Update SDK v6.30.10.7
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build914-S0020)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/18
-----------------------------------------------------------------------------------------------------------
1. Fix BTD2012071178: [Win7] default did not launch UI after reboot, user need to launch it manually.
------------------------------------------------------------------------------------------------------------



Utility: V1.01 (Build914-S0019)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/18
-----------------------------------------------------------------------------------------------------------
1. Update version V1.01
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build914-S0018)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/14
-----------------------------------------------------------------------------------------------------------
1. Set Russia ad-hoc mode range 1~13
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build907-S0017)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/14
-----------------------------------------------------------------------------------------------------------
1. Update vista WHQL driver 6.31.65.1
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build907-S0016)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/09/07
-----------------------------------------------------------------------------------------------------------
1. Fixed 5.1.11, 5.1.12, 5.1.13 in the Wi-Fi Protected Setup Test Plan_v2-0-8, the STAUT must be able to join an AP's WLAN through the AP's internal Registrar using PIN method when the AP's WSC State is Not Configured.
2. Fixed 5.1.7, 5.1.8 in the Wi-Fi Protected Setup Test Plan_v2-0-8, after one minutes under WPS PBC, push HW button again, it can't re-count time issue.
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build824-S0015)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/24
-----------------------------------------------------------------------------------------------------------
1. Adjust Signal value
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build814-S0014)
Driver:
    Windows 2000/XP x86 –6.30.61.21(WHQL passed)
    Windows XP x64 –6.30.61.21(WHQL passed)
    Windows 7 x86 –6.30.61.21(WHQL passed)
    Windows 7 x64 –6.30.61.21(WHQL passed)
    Windows Vista x32 –6.31.65.1
    Windows Vista x64 –6.31.65.1

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/16
-----------------------------------------------------------------------------------------------------------
1. Update vista driver 6.31.65.1
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build814-S0013)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/14
------------------------------------------------------------------------------------------------------------
1. Fix: [Win7] After doing WPS, sometimes UI crashed issue.
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build813-S0012)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/13
------------------------------------------------------------------------------------------------------------
1. Fix BTD2012080363: [Win7] After WPS successful, STA did not auto connect to AP
2. Fix: [Win7] After doing WPS, sometimes UI crashed issue.
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build809-S0011)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/10
------------------------------------------------------------------------------------------------------------
1. Fix BTD2012080354: WPS PIN can't work with Dual band AP
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build809-S0010)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/09
------------------------------------------------------------------------------------------------------------
1. Add XP/Win7 WHQL driver
2. Fix BTD2012070361: Adapter disappear after StandBy/Hibernate. (XP/Win7), modified VID/PID command
3. Fix BTD2012071178: Win7] When system UAC is ON, every time system bootup, it will popup UAC dialog when UI is going to launch-check S0009, Win7 x64 will run UI after reboot. Modified Win7 x64 can't run UI automatically after reboot.
4. Fix BTD2012070769: DWA-182 can't function normally on some machine with USB cradle.
5. Adjust Signal value
6. Add initial RSSI.
7. Please enter registry, and search SetIniRSSIF under HKEY_LOCAL_MACHINE folder.
Show initial RSSI: Hexadecimal: 100000
Don't show initial RSSI: Hexadecimal: 0
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build731-S0009)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.21
    Windows 7 x64 –6.30.61.21

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/06
------------------------------------------------------------------------------------------------------------
1. Update Win7 driver 6.30.61.21
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build731-S0008)
Driver:
    Windows 2000/XP x86 –6.30.61.21
    Windows XP x64 –6.30.61.21
    Windows 7 x86 –6.30.61.20
    Windows 7 x64 –6.30.61.20

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/03
------------------------------------------------------------------------------------------------------------
1. Fix BTD2012071671: Sometimes UI will shows warning message when we trying to scan AP with Wireless Connection Wizard. (XP/Win7)
Sol: Choose no security, exist the ssid, and high signal state.
2. Update XP driver 6.30.61.21
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build731-S0007)
Driver:
    Windows 2000/XP x86 –6.30.61.20
    Windows XP x64 –6.30.61.20
    Windows 7 x86 –6.30.61.20
    Windows 7 x64 –6.30.61.20

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/08/01
------------------------------------------------------------------------------------------------------------
1. Update driver 6.30.61.20
2. Change country code for US
3. Fix BTD2012071643: [Win7] When system's WLAN service restart, the UI's tray icon will disappear. This issue can't duplicate on S0007
4. Fix BTD2012071692: Setup's vendor/product name (must be D-Link DWA-182) is wrong at the first page and uninstall finish page.
5. Fix BTD2012071168: [Win7] After doing WPS (AP: security mode: None) successful, use UI to connect to another AP with WPA2 PSK AES will fail.
Sol: When doing WPS, close UI. If a user exits WPS, open UI.(This sol just for win7.)
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build727-S0006)
Driver:
    Windows 2000/XP x86 –6.30.61.17
    Windows XP x64 –6.30.61.17
    Windows 7 x86 –6.30.61.17
    Windows 7 x64 –6.30.61.17

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/27
------------------------------------------------------------------------------------------------------------
1. To modify advanced property of driver, reserving Roaming Decision, and the name of Roaming Decision is changed to Roaming Sensitivity.
2. Fix BTD2012070246: When AP set to HT80, STA connect to AP the UI's channel will show different channel.
3. Fix BTD2012071446: Sometimes UI will become slow or not responding. (XP x86/64)
4. Fix BTD2012071168: [Win7] After doing WPS successful, use UI to connect to another AP with WPA2 PSK AES will fail. This issue can't duplicate on S0006.
5. Fix BTD2012071495: [Win7] UI easy to crash when change adhoc WEP key index.
6. Fix BTD2012071579: [vista] English setup warning message looks strange
7. Fix BTD2012071619: The Wireless Connection Wizard flow was wrong. (XP/Win7)
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build724-S0005)
Driver:
    Windows 2000/XP x86 –6.30.61.17
    Windows XP x64 –6.30.61.17
    Windows 7 x86 –6.30.61.17
    Windows 7 x64 –6.30.61.17

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/24
------------------------------------------------------------------------------------------------------------
1. Add channel
2. Fix disable/enable problem
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build720-S0004)
Driver:
    Windows 2000/XP x86 –6.30.61.17
    Windows XP x64 –6.30.61.17
    Windows 7 x86 –6.30.61.17
    Windows 7 x64 –6.30.61.17

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/20
------------------------------------------------------------------------------------------------------------
1. Add DWA-182_A1_UI no vista strings: Traditional Chinese, Simplified Chinese, and Russia
2. Update driver 6.30.61.17
3. Removed channel, wait for new SDK
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build719-S0003)
Driver:
    Windows 2000/XP x86 –6.30.61.15
    Windows XP x64 –6.30.61.15
    Windows 7 x86 –6.30.61.15
    Windows 7 x64 –6.30.61.15

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/19
------------------------------------------------------------------------------------------------------------
1. Fix BTD2012070246: When AP set to HT40, STA connect to AP the UI's channel will show different channel
2. Fix BTD2012070252: Add Google Chrome/Toolbar Installation in setup
3. Fix BTD2012070285: HW PBC did not launch "D-Link wizard.exe" under Win7 x86/x64, UI need to be run on administrator mode
4. Fix BTD2012070419: set adhoc mode default speed to 11a/b/g
5. Fix BTD2012070557: set default bandwidth HT20/40
6. Add DWA-182_A1_UI no vista strings, except Traditional Chinese, Simplified Chinese, and Russia
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build718-S0002)
Driver:
    Windows 2000/XP x86 –6.30.61.15
    Windows XP x64 –6.30.61.15
    Windows 7 x86 –6.30.61.15
    Windows 7 x64 –6.30.61.15

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/18
------------------------------------------------------------------------------------------------------------
1. Add win7 Extensive Shortcut Menu
2. Fix bug 6: Use UI create a profile with none security, after active the profile's security become "shared"
3. Fix bug 12: Can't connect to AP with WPA2-PSK AES security mode by "Auto" passphrase setting. (XP x86/64)
4. Fix dual-band overlap issue in the PIN mode
------------------------------------------------------------------------------------------------------------



Utility: V1.00 (Build0702-S0001)
Driver:
    Windows 2000/XP x86 –6.62.8.3
    Windows XP x64 –6.62.8.3
    Windows 7 x86 –6.62.8.3
    Windows 7 x64 –6.62.8.3

Hardware: D-Link DWA-182 Wireless AC Dual Band USB Adapter
VID/PID: 2001/3101
Chip: Broadcom BCM43526
Date: 2012/07/02
------------------------------------------------------------------------------------------------------------
1. DWA-182 string for vista: DWA-182 11ac USB dongle doesn't support Windows Vista OS, only supports Windows XP and Windows 7.
------------------------------------------------------------------------------------------------------------
 [First Release]
------------------------------------------------------------------------------------------------------------


Pubblicato anche il driver per dispositivo equivalente NETGEAR A6200 (Win 9x/2K/XP/Vista/7-64 v6.32.145.1 2014/03/26) con installatore solo driver ed installatore utilità di gestione proprietaria. Sono perfettamente compatibili con la D-Link DWA-182 A1 ma, avendo ID dispositivo diverso, bisogna forzare manualmente l'aggiornamento driver dopo l'installazione nella relativa cartella. Si può anche operare sul file bcmwlhigh6.inf per sostituire l'identificativo e la descrizione, anche se poi il sistema non riconoscerà la firma digitale.
Dal 2014 sembra che Broadcom (Avago) non si occupi più di aggiornare i driver per il suo BCM43526. Fra i 9 dispositivi (tutti compatibili) esistenti in commercio basati sul BCM43526 solo i driver dell'A6200 sono stati aggiornati alla versione del 2014 mentre gli altri sono fermi a quella del 2013. Però D-Link, fra tutti, ha provveduto a distribuirli sempre a 32 e 64 bit, ad aggiungere il supporto a Windows 8.1 e ad aggiornare la firma digitale.

[Pondera]

Pubblicato driver DWA-182 C1 V3.06b04 2016/01/21 (Win XP/Vista/7/8/8.1/10-64 v1030.2.731.2015 2015/10/29).

Codice Seleziona Espandi


DWA-182 Firmware Release Note

Version 3.0b04
Hardware: C1
Date: 2016/01/21

Driver:
Windows XP x86 - 1030.2.731.2015 (WHQL pass)
Windows XP x64 - 1030.2.731.2015 (WHQL pass)
Windows Vista x86 - 1030.2.731.2015 (WHQL pass)
Windows Vista x64 - 1030.2.731.2015 (WHQL pass)
Windows 7 x86 - 1030.2.731.2015 (WHQL pass)
Windows 7 x64 - 1030.2.731.2015 (WHQL pass)
Windows 8 x86 - 1030.2.731.2015 (WHQL pass)
Windows 8 x64 - 1030.2.731.2015 (WHQL pass)
Windows 8.1 x86 - 1030.2.731.2015 (WHQL pass)
Windows 8.1 x64 - 1030.2.731.2015 (WHQL pass)
Windows 10 x86 - 1030.2.731.2015 (WHQL pass)
Windows 10 x64 - 1030.2.731.2015 (WHQL pass)

Problems Resolved:
1. Fix USB speed issue: USB speed limited to USB 2.0 standard when operating in 5 GHz band.
2. Update Microsoft WHQL certification

--------------------------------------------------

Version 3.05b01
Hardware: C1
Date: 2015/10/21

Driver:
Windows XP x86 - 1027.6.0417.2015 (WHQL pass)
Windows XP x64 - 1027.6.0417.2015 (WHQL pass)
Windows Vista x86 - 1027.6.0417.2015 (WHQL pass)
Windows Vista x64 - 1027.6.0417.2015 (WHQL pass)
Windows 7 x86 - 1027.6.0417.2015 (WHQL pass)
Windows 7 x64 - 1027.6.0417.2015 (WHQL pass)
Windows 8 x86 - 1027.6.0417.2015 (WHQL pass)
Windows 8 x64 - 1027.6.0417.2015 (WHQL pass)
Windows 8.1 x86 - 1027.6.0417.2015 (WHQL pass)
Windows 8.1 x64 - 1027.6.0417.2015 (WHQL pass)
Windows 10 x86 - 1030.0.0515.2015 (WHQL pass)
Windows 10 x64 - 1030.0.0515.2015 (WHQL pass)

Problems Resolved:
Fixed WPS issue: Unable to connect AP/Router by WPS after un-plug and plug-in dongle.

Enhancement:
1. Support Windows 10
2. Improve driver installation procedure: Double click "Setup.exe" and user can select "Upgrade" to replace existing driver or select "Remove" to remove the drivers from computer.

--------------------------------------------------

Version 3.04b02
Hardware: C1
Date: 2015/10/14

Driver:
Windows XP x86 - 1026.13.0.0625.2014 (WHQL pass)
Windows XP x64 - 1026.13.0.0625.2014 (WHQL pass)
Windows Vista x86 - 1026.13.0.0625.2014 (WHQL pass)
Windows Vista x64 - 1026.13.0.0625.2014 (WHQL pass)
Windows 7 x86 - 1026.13.0.0625.2014 (WHQL pass)
Windows 7 x64 - 1026.13.0.0625.2014 (WHQL pass)
Windows 8 x86 - 1026.13.0.0625.2014 (WHQL pass)
Windows 8 x64 - 1026.13.0.0625.2014 (WHQL pass)
Windows 8.1 x86 - 1026.13.0.0625.2014 (WHQL pass)
Windows 8.1 x64 - 1026.13.0.0625.2014 (WHQL pass)


Problems Resolved:

Enhancement:
Update D-Link digital signiture

--------------------------------------------------

Firmware: v3.03b04
Hardware: C1
Date: 23, Jan, 2015


Driver:        
XP/XP64: 1026.13.0625.2014
Vista/Vista-64: 1026.13.0625.2014
Win7/Win7-64: 1026.13.0625.2014
Win8/Win8-64: 1026.13.0625.2014
Win8.1/Win8.1-64: 1026.13.0625.2014

Enhancements:
1. Update WHQL driver.

--------------------------------------------------

Firmware: v3.02b05
Hardware: C1
Date: 18, Mar, 2014

Driver:
XP/XP64: 1024.9.1219.2013
Vista/Vista-64: 1024.9.1219.2013
Win7/Win7-64: 1024.9.1219.2013
Win8/Win8-64: 1024.9.1219.2013
Win8.1/Win8-64: 1026.4.1023.2013


Problems Resolved:
Fix Wizard incorrect page information.
(1) When changing USB mode, the connection will be re-connected.
(2) When changing USB mode, the utility will disappear during 10s-15s.
(3) XP/XP64 do not support utility, so users can't use the utility to creat e the WPS connection.
(4) Win8 remove hardware icon might be disappear.
(5) When the security is Shared key, the configuration of Utility profile is not accordant.

Enhancements:
1. NA

--------------------------------------------------

21. v3.01b06beta01:
        Release Date: 11/06/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.22.132.0
 (2) Firmware (WlanDll.dll):XP:v1.42.133.50
          Vista/Win7/Win8:1.54.133.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1024.4.0910.2013
 Vista/Vista-64: 1024.4.0910.2013
 Win7/Win7-64: 1024.4.0910.2013
 Win8/Win8-64: 1024.4.0910.2013
 Remark:
 (1) Modify swUSB tool for fix high memory state.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
 (4) Win8 remove hardware icon might be disappear.
 (5) When the security is Shared key, the configuration of Utility profile is not accordant.

20. v3.01b06:
        Release Date: 10/30/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.22.132.0
 (2) Firmware (WlanDll.dll):XP:v1.42.133.50
          Vista/Win7/Win8:1.54.133.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1024.4.0910.2013
 Vista/Vista-64: 1024.4.0910.2013
 Win7/Win7-64: 1024.4.0910.2013
 Win8/Win8-64: 1024.4.0910.2013
 Remark:
 (1) Update WHQL Driver.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
 (4) Win8 remove hardware icon might be disappear.
 (5) When the security is Shared key, the configuration of Utility profile is not accordant.

19. v3.01b05:
        Release Date: 10/16/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.22.132.0
 (2) Firmware (WlanDll.dll):XP:v1.42.133.50
          Vista/Win7/Win8:1.54.133.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1024.4.0910.2013
 Vista/Vista-64: 1024.4.0910.2013
 Win7/Win7-64: 1024.4.0910.2013
 Win8/Win8-64: 1024.4.0910.2013
 Remark:
 (1) Modify Brazil domain code value.
 (2) Modify String show in Connect Wizard.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
 (4) Win8 remove hardware icon might be disappear.
 (5) When the security is Shared key, the configuration of Utility profile is not accordant.

18. v3.01b04:
        Release Date: 10/09/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.21.132.0
 (2) Firmware (WlanDll.dll):XP:v1.41.133.50
          Vista/Win7/Win8:1.53.133.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1024.4.0910.2013
 Vista/Vista-64: 1024.4.0910.2013
 Win7/Win7-64: 1024.4.0910.2013
 Win8/Win8-64: 1024.4.0910.2013
 Remark:
 (1) Modify  Taiwan domain code value.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
 (4) Win8 remove hardware icon might be disappear.
 (5) When the security is Shared key, the configuration of Utility profile is not accordant.

17. v3.01b03:
 Release Date: 10/02/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.21.132.0
 (2) Firmware (WlanDll.dll):XP:v1.40.133.50
          Vista/Win7/Win8:1.52.133.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1024.4.0910.2013
 Vista/Vista-64: 1024.4.0910.2013
 Win7/Win7-64: 1024.4.0910.2013
 Win8/Win8-64: 1024.4.0910.2013
 Remark:
 (1) update driver for modify domain code show in Utility.
 (2) Add new flow page for use manually to establish connect.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
 (4) Win8 remove hardware icon might be disappear.
 (5) When the security is Shared key, the configuration of Utility profile is not accordant.

16. v3.01b02:
 Release Date: 06/25/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.19.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.7.0408.2013
 Vista/Vista-64: 1023.7.0408.2013
 Win7/Win7-64: 1023.7.0408.2013
 Win8/Win8-64: 1023.7.0408.2013
 Remark:
 (1) update WHQL driver.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
 (4) Win8 remove hardware icon might be disappear.
 (5) When the security is Shared key, the configuration of Utility profile is not accordant.

15. v3.01b01:
 Release Date: 05/17/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.19.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.7.0408.2013
 Vista/Vista-64: 1023.7.0408.2013
 Win7/Win7-64: 1023.7.0408.2013
 Win8/Win8-64: 1023.7.0408.2013
 Remark:
 (1) Update Driver for fix DFS+EN300.

 Fix bug:
 (1) There are spaces at the front or the end in password can not create WEP connection.
 (2) Fix driver crash.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
 (4) Win8 remove hardware icon might be disappear.
 (5) All drivers do not pass WHQL.

14. v3.00b07:
 Release Date: 04/24/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.19.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.7.0408.2013
 Vista/Vista-64: 1023.7.0408.2013
 Win7/Win7-64: 1023.7.0408.2013
 Win8/Win8-64: 1023.7.0408.2013
 Remark:
 (1) Update Driver for fix DFS+EN300.

 Fix bug:
 (1) There are spaces at the front or the end in password can not create WEP connection.
 (2) Fix driver crash.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) XP/XP64 do not support utility, so users can¡¦t use the utility to create the WPS connection.
 (4) Win8 remove hardware icon might be disappear.
 (5) All drivers do not pass WHQL.

13. v3.00b06:
 Release Date: 03/05/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.19.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Fix bug:
 (1) Remove utility shortcut on XP.

 Known Issue:
 (1) When changing USB mode, the connection will be re-connected.
 (2) When changing USB mode, the utility will disappear during 10s-15s.
 (3) WPS can not work on XP.
 (4) Win8 remove hardware icon might be disappear.

12. v3.00b05:
 Release Date: 03/04/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.19.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Remark:
 (1) Update .cat file to pass WHQL

 Known Issue:
 (2) When changing USB mode, the connection will be re-connected.
 (3) When changing USB mode, the utility will disappear during 10s-15s.
 (4) WPS can not work on XP.
 (5) Win8 remove hardware icon might be disappear.

11. v3.00b04:
 Release Date: 02/22/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.19.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Remark:
 (1) Sign installshield execution file.

 Known Issue:
 (1) All drivers do not pass WHQL.
 (2) When changing USB mode, the connection will be re-connected.
 (3) When changing USB mode, the utility will disappear during 10s-15s.
 (4) WPS can not work on XP.
 (5) Win8 remove hardware icon might be disappear.

10. v3.00b03:
 Release Date: 02/20/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.19.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Fix bug:
 (1) WPS2.0 fail.
 Remark:
 (1) Update driver.
 Known Issue:
 (1) All drivers do not pass WHQL.
 (2) When changing USB mode, the connection will be re-connected.
 (3) When changing USB mode, the utility will disappear during 10s-15s.
 (4) WPS can not work on XP.
 (5) Win8 remove hardware icon might be disappear.

9. v3.00b02:
 Release Date: 02/07/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.19.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Fix bug:
 (1) WPS2.0 fail.
 Remark:
 (1) Update driver.
 (2) Change product description.
 Known Issue:
 (1) All drivers do not pass WHQL.
 (2) When changing USB mode, the connection will be re-connected.
 (3) When changing USB mode, the utility will disappear during 10s-15s.
 (4) WPS can not work on XP.
 (5) Win8 remove hardware icon might be disappear.

8. v3.00b01:
 Release Date: 01/31/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.18.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Fix bug:
 (1) Fixed 5G mode - Utility will disappear and appear frequently during the connection.
 (2) Utility - Error message pop-up in Windows XP.
 (3) Incorrect information in Connect Wizard and tip of Tray Icon.
 Remark:
 (1) Remove the utility in XP.
 (2) Change CD version to v3.00 by Dlink request.
 Known Issue:
 (1) All drivers do not pass WHQL.
 (2) When changing USB mode, the connection will be re-connected.
 (3) When changing USB mode, the utility will disappear during 10s-15s.
 (4) WPS can not work on XP.

7. v1.00b07:
 Release Date: 01/28/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.17.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Remark:
 (1) Update SwUSB tool to switch to USB3.0.
 (2) Close CheckUSB tool before hot-plug USB dongle.
 Known Issue:
 (1) All drivers do not pass WHQL.
 (2) When changing USB mode, the connection will be re-connected.
 (3) When changing USB mode, the utility will disappear during 10s-15s.
 (4) For changing USB mode, it has to use WZC to connect on XP.

6. v1.00b06:
 Release Date: 01/25/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.17.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Remark:
 (1) Change the Model name.
 (2) Change PID/VID.
 Fix bug:
 (1) USB can not switch to Usb 3.0 mode when connecting to the ac router.

 Known Issue:
 (1) All drivers do not pass WHQL.
 (2) When changing USB mode, the connection will be re-connected.
 (3) When changing USB mode, the utility will disappear during 10s-15s.
 (4) For changing USB mode, it has to use WZC to connect on XP.

5. v1.00b05:
 Release Date: 01/15/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.16.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.5.0116.2013
 Vista/Vista-64: 1023.5.0116.2013
 Win7/Win7-64: 1023.5.0116.2013
 Win8/Win8-64: 1023.5.0116.2013
 Remark:
 (1) Update driver.
 (2) Disable device advanced property "Wireless Mode" page

 Known Issue:
 (1) All drivers do not pass WHQL.
 (2) Can not scan channel 52 ~ 64

4. v1.00b04:
 Release Date: 01/03/2013
 Component Version:
 (1) Utility (wirelesscm.exe):5.16.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.3.1203.2012
 Vista/Vista-64: 1023.3.1203.2012
 Win7/Win7-64: 1023.3.1203.2012
 Win8/Win8-64: 1023.4.1218.2012
 Remark:
 (1) Fixed When 5G Channel Width select 20/40/80Mhz unable to connect.

 Known Issue:
 (1) All drivers do not pass WHQL.

3. v1.00b03:
 Release Date: 12/28/2012
 Component Version:
 (1) Utility (wirelesscm.exe):5.16.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.3.1203.2012
 Vista/Vista-64: 1023.3.1203.2012
 Win7/Win7-64: 1023.3.1203.2012
 Win8/Win8-64: 1023.4.1218.2012
 Remark:
 (1) Update Drivers.
 (2) Change PID/VID.
 (3) Change Driver display name.
 (4) Change Model name to DWA-180.

 Known Issue:
 (1) All drivers do not pass WHQL.

2. v1.00b02:
 Release Date: 12/12/2012
 Component Version:
 (1) Utility (wirelesscm.exe):5.16.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.2.1121.2012
 Vista/Vista-64: 1023.2.1121.2012
 Win7/Win7-64: 1023.2.1121.2012
 Win8/Win8-64: 1023.2.1121.2012
 Remark:
 (1) Modify Device description.
 (2) Modify PID/VID value.
 (3) The WZC tray icon in Win8 is not correct if DWA-182 connects to
    the AP which security is WEP.
 Known Issue:
 (1) All drivers do not pass WHQL.

1. v1.00b01:
 Release Date: 11/29/2012
 Component Version:
 (1) Utility (wirelesscm.exe):5.15.132.0
 (2) Firmware (WlanDll.dll):XP:v1.29.132.50
          Vista/Win7/Win8:1.45.132.60
 (3) InstallShield: 2012
 (4) Driver: XP/XP64: 1023.2.1121.2012
 Vista/Vista-64: 1023.2.1121.2012
 Win7/Win7-64: 1023.2.1121.2012
 Win8/Win8-64: 1023.2.1121.2012
 Remark:
 (1) First Release.
 Known Issue:
 (1) Device description is not correct.
 (2) PID/VID value are not correct.
 (3) The WZC tray icon in Win8 is not correct if DWA-182 connects to
    the AP which security is WEP.


Pubblicato anche il driver Realtek multimarca v1030.13.704.2016 2016/12/19 al momento il più aggiornato.

[Carciofone]

Attenzione: segnalo il download dell'ultimo driver Realtek RTL8192CU / RTL8188RU / RTL8192EU Wireless LAN drivers v.1030.21.0302.2017 - Realtek Wireless Lan drivers  - compatibile con DWA-182 C1 e DWA-192 per tutti i Sistemi Operativi Windows XP - 10 (32 / 64 bit). Riconosce anche tutte queste altre schede wireless con chipset Realtek tra cui ben 16 modelli di schede USB D-Link, ragion per cui è da considerarsi un pacchetto driver di aggiornamento universale.

[Carciofone]

Aggiornato il primo post con link funzionanti e l'ultima versione del driver per rev. C1 D1 che risolve il bug del KRACK WPA2.

Changelog:

Codice Seleziona Espandi

DWA-182 AC1900 Wi-Fi USB3.0 Adapter

Driver: 4.01b01
Hardware: D1
Date: 2018/03/16

Note:
This release is to patch the WPA2 Key Reinstallation Attack (KRACK) Security Vulnerabilities affecting this product.

Problems Resolved:
A WPA2 wireless protocol vulnerability was reported to CERT//CC and public disclosed as: VU#228519 - Wi-Fi Protected Access II (WPA2) handshake traffic can be manipulated to induce nonce and session key reuse.

The following CVE IDs have been assigned to VU#228519. These vulnerabilities in the
WPA2 protocol:

·   CVE-2017-13077: reinstallation of the pairwise key in the Four-way handshake
·   CVE-2017-13078: reinstallation of the group key in the Four-way handshake
·   CVE-2017-13079: reinstallation of the integrity group key in the Four-way handshake
·   CVE-2017-13080: reinstallation of the group key in the Group Key handshake
·   CVE-2017-13081: reinstallation of the integrity group key in the Group Key handshake
·   CVE-2017-13082: accepting a retransmitted Fast BSS Transition Re-association Request and reinstalling the pairwise key while processing it
·   CVE-2017-13084: reinstallation of the STK key in the PeerKey handshake
·   CVE-2017-13086: reinstallation of the Tunneled Direct-Link Setup (TDLS) PeerKey (TPK) key in the TDLS handshake
·   CVE-2017-13087: reinstallation of the group key (GTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame
·   CVE-2017-13088: reinstallation of the integrity group key (IGTK) when processing a Wireless Network Management (WNM) Sleep Mode Response frame

-----------------

Version: 4.00b01
Hardware: D1
Date: 2017/09/11

Note:
1st release


[Carciofone]

Attenzione: segnalo il download dell'ultimo driver Realtek RTL8192CU / RTL8188RU / RTL8192EU Wireless LAN drivers 1030.27.0425.2018 WHQL - Realtek Wireless Lan drivers  - compatibile con DWA-182 C1 e DWA-192 per tutti i Sistemi Operativi Windows XP - 10 (32 / 64 bit). Riconosce anche tutte queste altre schede wireless con chipset Realtek tra cui ben 16 modelli di schede USB D-Link, ragion per cui è da considerarsi un pacchetto driver di aggiornamento universale.

Codice Seleziona Espandi

[Realtek.NTx86.6.3]
;; For 8192C RTK common ================================================================
%RTL8188cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BFF&PID_8160 ; RTK 88CU board for B/G/N      
%RTL8188cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8176 ; RTK 88CU board for B/G/N
%RTL8188cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8176&REV_0200&SS
%RTL8188cu_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_0BDA&PID_8177 ; RTK 88CU board for B/G
%RTL8188cu_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_0BDA&PID_8177&REV_0200&SS
%RTL8188ce_vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8170 ; RTK 88CE_VAU board for B/G/N
%RTL8188ce_vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8170&REV_0200&SS
%RTL8188ce_vau_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_0BDA&PID_817E ; RTK 88CE_VAU board for B/G
%RTL8188ce_vau_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_0BDA&PID_817E&REV_0200&SS
%RTL8192ce_vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817C ; RTK 92CE_VAU board for B/G/N
%RTL8192ce_vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817C&REV_0200&SS
%RTL8188cu_slim_solo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817A ; RTK slim_solo board for B/G/N
%RTL8188cu_slim_solo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817A&REV_0200&SS
%RTL8188cu_slim_solo_lc.DeviceDesc% = RTL8192cu_wow.ndi, USB\VID_0BDA&PID_819A ; LC slim solo for BGN.
%RTL8188cu_slim_solo_lc.DeviceDesc% = RTL8192cu_wow.ndi, USB\VID_0BDA&PID_819A&REV_0200&SS
%RTL8188cu_slim_combo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817B ; RTK slim_combo board for B/G/N
%RTL8188cu_slim_combo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_817B&REV_0200&SS
%RTL8188ru.DeviceDesc% = RTL8192cu8188RU.ndi,USB\VID_0BDA&PID_817F ; RTK 88RU board for B/G/N
%RTL8188ru.DeviceDesc% = RTL8192cu8188RU.ndi,USB\VID_0BDA&PID_817F&REV_0200&SS
%RTL8188ru.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_317F ; RTK 88RU board for B/G/N
%RTL8188ru.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_317F&REV_0200&SS
%RTL8188cus_vl.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_818A ; RTK 88RU board for B/G/N
%RTL8188cus_vl.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_818A&REV_0200&SS
%RTL8188cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_103C&PID_1629 ; HP/Liteon board for B/G/N
%RTL8192cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8192
%RTL8192cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8178 ; RTK 92CU board for B/G/N
%RTL8192cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_8178&REV_0200&SS
%RTK_AZ88vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_13D3&PID_3358 ; AZ 88CE_VAU for B/G/N
%RTK_AZ88vau.DeviceDesc% = RTL8192cu.ndi, USB\VID_13D3&PID_3358&REV_0200&SS
%RTK_AZ88vau_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_13D3&PID_3359 ; AZ 88CE_VAU for B/G
%RTK_AZ88vau_G.DeviceDesc% = RTL8192cu_G.ndi, USB\VID_13D3&PID_3359&REV_0200&SS
%RTK_AZ88cus.DeviceDesc% = RTL8192cu.ndi, USB\VID_13D3&PID_3357 ; AZ 88CUS for B/G/N
%RTK_AZ88cus.DeviceDesc% = RTL8192cu.ndi, USB\VID_13D3&PID_3357&REV_0200&SS
%RTL8188ctv.DeviceDesc% = RTL8192cu.ndi, USB\VID_0BDA&PID_018A ; 8188CTV for BGN test only.

;; For 8192D RTK common ================================================================
%RTL8192du.DeviceDesc% = RTL8192du.ndi, USB\VID_0BDA&PID_8194
%RTL8192du.DeviceDesc%   = RTL8192du.ndi, USB\VID_0BDA&PID_8111
%RTL8192du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_0BDA&PID_8193&MI_00
%RTL8192du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_0BDA&PID_8193&REV_0000&MI_00
%RTL8192du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_0BDA&PID_8193&MI_01
%RTL8192du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_0BDA&PID_8193&REV_0000&MI_01
%RTL8192du2.DeviceDesc% = RTL8192du0.ndi, USB\VID_0BDA&PID_0193&MI_00
%RTL8192du2.DeviceDesc% = RTL8192du0.ndi, USB\VID_0BDA&PID_0193&REV_0000&MI_00
%RTL8192du3.DeviceDesc% = RTL8192du1.ndi, USB\VID_0BDA&PID_0193&MI_01
%RTL8192du3.DeviceDesc% = RTL8192du1.ndi, USB\VID_0BDA&PID_0193&REV_0000&MI_01

;; For 8723 RTK common ================================================================
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_872B
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_8725&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_8725&REV_0200&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_0723&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_0723&REV_0200&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_0724&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_0724&REV_0200&MI_02&SS
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_1724&MI_02
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_1724&REV_0200&MI_02&SS
%RTL8723au.DeviceDesc%   = RTL8723au.ndi, USB\VID_0BDA&PID_A724

;; For 8188E RTK common ================================================================
%RTL8188eu.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_8179
%RTL8188eu.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_8179&REV_0200&SS
%RTL8188ee_vau.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_A179
%RTL8188ee_vau.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_A179&REV_0200&SS
%RTL8188eu_0179.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_0179
%RTL8188eu_0179.DeviceDesc%   = RTL8188eu.ndi, USB\VID_0BDA&PID_0179&REV_0200&SS

;; For 8812A RTK common ================================================================
%RTL8812au.DeviceDesc% = RTL8812au.ndi, USB\VID_0BDA&PID_8812
%RTL8812au_881A.DeviceDesc% = RTL8812au_Vx.ndi, USB\VID_0BDA&PID_881A
%RTL8812au_881B.DeviceDesc% = RTL8812au_Vx.ndi, USB\VID_0BDA&PID_881B
%RTL8812au_881C.DeviceDesc% = RTL8812au_Vx.ndi, USB\VID_0BDA&PID_881C

;; For 8811A RTK common ================================================================
%RTL8811au.DeviceDesc% = RTL8811au.ndi, USB\VID_0BDA&PID_0811
%RTL8811au.DeviceDesc% = RTL8811au.ndi, USB\VID_0BDA&PID_A811
%RTL8811au.DeviceDesc% = RTL8811au.ndi, USB\VID_7392&PID_A813
%RTL8811au_Combo.DeviceDesc% = RTL8821auLC.ndi, USB\VID_0BDA&PID_0823&MI_02
%RTL8811au_Combo.DeviceDesc% = RTL8821auLC.ndi, USB\VID_0BDA&PID_0823&REV_0200&MI_02

;; For 8192E RTK common ================================================================
%RTL8192eu.DeviceDesc% = RTL8192eu.ndi, USB\VID_0BDA&PID_818B
%RTL8192eu.DeviceDesc% = RTL8192eu.ndi, USB\VID_0BDA&PID_818C&MI_02
%RTL8192eu.DeviceDesc% = RTL8192eu.ndi, USB\VID_0BDA&PID_818C&REV_0200&MI_02


;; For 8821B RTK common ================================================================
%RTL8821bu.DeviceDesc% = RTL8821bu.ndi, USB\VID_0BDA&PID_B821
%RTL8821bu.DeviceDesc% = RTL8821bu.ndi, USB\VID_0BDA&PID_B82B

;;----------------------------------------------------------------------------
;; For 8814A RTK common
;;----------------------------------------------------------------------------
%RTL8814au.DeviceDesc% = RTL8814au.ndi, USB\VID_0BDA&PID_8813

;;----------------------------------------------------------------------------
;; For 8723B RTK common
;;----------------------------------------------------------------------------
%RTL8723bu.DeviceDesc% = RTL8723bu.ndi, USB\VID_0BDA&PID_B720&MI_02
%RTL8723bu.DeviceDesc% = RTL8723bu.ndi, USB\VID_0BDA&PID_B720&REV_0200&MI_02


[PCI.NTx86.6.3]
;; For 8192C PCI ================================================================
%PCI.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_ED17
%PCI-2.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_4902
%PCI_Abocom88cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_AB2A
%PCI_Abocom92cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_AB2B
%PCI_Vencer.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_1201

;; For 8192D PCI ================================================================
%PCI_Abocom_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_AB2C&MI_00
%PCI_Abocom_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_AB2C&REV_0000&MI_00
%PCI_Abocom_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_AB2C&MI_01
%PCI_Abocom_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_AB2C&REV_0000&MI_01
%PCI_3_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_4903&MI_00
%PCI_3_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_4903&REV_0000&MI_00
%PCI_3_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_4903&MI_01
%PCI_3_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_4903&REV_0000&MI_01
%PCI_4_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_4904&MI_00
%PCI_4_du0.DeviceDesc% = RTL8192du0.ndi, USB\VID_2019&PID_4904&REV_0000&MI_00
%PCI_4_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_4904&MI_01
%PCI_4_du1.DeviceDesc% = RTL8192du1.ndi, USB\VID_2019&PID_4904&REV_0000&MI_01
%PCIWIDI_92DU.DeviceDesc% = RTL8192du.ndi, USB\VID_2019&PID_AB2D

;; For 8812A ABOCOM ================================================================
%PCI_AB30.DeviceDesc% = RTL8812au.ndi, USB\VID_2019&PID_AB30

;; For 8811A ABOCOM ================================================================
%PCI_AB32.DeviceDesc% = RTL8811au_PCI.ndi, USB\VID_2019&PID_AB32

[Sitecom.NTx86.6.3]
;; For 8192C SITECOM ================================================================
%Sitecom.DeviceDesc% = RTL8192cu.ndi, USB\VID_0DF6&PID_0052
%Sitecom_UN.DeviceDesc% = RTL8192cu.ndi, USB\VID_0DF6&PID_005C
%Sitecom_HG.DeviceDesc% = RTL8192cu.ndi, USB\VID_0DF6&PID_0061
;; For 8812A Sitecom ================================================================
%Sitecom_0074.DeviceDesc% = RTL8812au.ndi, USB\VID_0DF6&PID_0074
;; For 8811A Sitecom ================================================================
%Sitecom_007A.DeviceDesc% = RTL8811au.ndi, USB\VID_0DF6&PID_007A

[EDIMAX.NTx86.6.3]
;; For 8192C EDIMAX ================================================================
%EDIMAX.DeviceDesc% = RTL8192cu.ndi, USB\VID_7392&PID_7811
%EDIMAX300.DeviceDesc% = RTL8192cu.ndi, USB\VID_7392&PID_7822
;; For 8812A Edimax ================================================================
%Edimax_A822.DeviceDesc% = RTL8812au.ndi, USB\VID_7392&PID_A822
;; For 8811A Edimax ================================================================
%Edimax_AC600.DeviceDesc% = RTL8811au.ndi, USB\VID_7392&PID_A811
%Edimax_AC600.DeviceDesc% = RTL8811au.ndi, USB\VID_7392&PID_A812
;; For 8192D EDIMAX ================================================================
%EDIMAX5G.DeviceDesc% = RTL8192du_5G.ndi, USB\VID_0BDA&PID_E194

[ELECOM.NTx86.6.3]
;; For 8192C ELECOM ================================================================
%ELECOM_4009.DeviceDesc% = RTL8192cu.ndi, USB\VID_056E&PID_4009
;; For 8188E ELECOM ================================================================
%ELECOM_4008.DeviceDesc% = RTL8188eu.ndi, USB\VID_056E&PID_4008
;; For 8811A ELECOM ================================================================
%ELECOM_WDC433DU2.DeviceDesc% = RTL8811au.ndi, USB\VID_056E&PID_4007

[Abocom.NTx86.6.3]
;; For 8192C ABOCOM ================================================================
%Abocom.DeviceDesc% = RTL8192cu.ndi, USB\VID_07B8&PID_8189
%Abocom92cu.DeviceDesc% = RTL8192cu.ndi, USB\VID_07B8&PID_8178

;; For 8192D ABOCOM ================================================================
%Abocom_92DU0.DeviceDesc% = RTL8192du0.ndi, USB\VID_07B8&PID_8193&MI_00
%Abocom_92DU0.DeviceDesc% = RTL8192du0.ndi, USB\VID_07B8&PID_8193&REV_0000&MI_00
%Abocom_92DU1.DeviceDesc% = RTL8192du1.ndi, USB\VID_07B8&PID_8193&MI_01
%Abocom_92DU1.DeviceDesc% = RTL8192du1.ndi, USB\VID_07B8&PID_8193&REV_0000&MI_01

;; For 8192E ABOCOM ================================================================
%Abocom_AB33.DeviceDesc% = RTL8192eu.ndi, USB\VID_2019&PID_AB33

;; For 8188E ABOCOM ================================================================
%Abocom_8179.DeviceDesc% = RTL8188eu.ndi, USB\VID_07B8&PID_8179

;; For 8812A ABOCOM ================================================================
%Abocom_8812.DeviceDesc% = RTL8812au.ndi, USB\VID_07B8&PID_8812

;; For 8811A ABOCOM ================================================================
%Abocom_0811.DeviceDesc% = RTL8811au.ndi, USB\VID_07B8&PID_0811

[Amigo.NTx86.6.3]
;; For 8192C AMIGO ================================================================
%Amigo.DeviceDesc% = RTL8192cu.ndi, USB\VID_0EB0&PID_9071

[Hercules.NTx86.6.3]
;; For 8192C HERCULES ================================================================
%Hercules.DeviceDesc% = RTL8192cu.ndi, USB\VID_06F8&PID_E033
%Hercules-E035.DeviceDesc% = RTL8192cu.ndi, USB\VID_06F8&PID_E035

[DLink.NTx86.6.3]
;; For 8192C DLINK ================================================================
%DLink-1.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_330A
%DLink-2.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_3309
%DLink-3.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_3308
%DLink-4.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_3307
%DLink-5.DeviceDesc% = RTL8192cu.ndi, USB\VID_2001&PID_330B

%DLink-DWA151.DeviceDesc% = RTL8192du.ndi, USB\VID_2001&PID_330C


%DLink_2001.DeviceDesc% = RTL8192eu.ndi, USB\VID_3312&PID_2001

;; For 8188E RTK common ================================================================
%DLINK_330F.DeviceDesc%   = RTL8188eu.ndi, USB\VID_2001&PID_330F
%DLINK_3310.DeviceDesc%   = RTL8188eu.ndi, USB\VID_2001&PID_3310
%DLINK_3311.DeviceDesc%   = RTL8188eu.ndi, USB\VID_2001&PID_3311

;; For 8812A DLINK ================================================================
%DLink-DWA183.DeviceDesc% = RTL8812auDLink.ndi, USB\VID_2001&PID_330E
%DLink-DWA182.DeviceDesc% = RTL8812auDLink.ndi, USB\VID_2001&PID_3313
%DLink_3315.DeviceDesc% = RTL8812auDLink.ndi, USB\VID_2001&PID_3315
%DLink_3316.DeviceDesc% = RTL8812auDLink.ndi, USB\VID_2001&PID_3316

;; For 8811A DLINK ================================================================
%DLink-DWA171.DeviceDesc% = RTL8811au.ndi, USB\VID_2001&PID_3314
%DLink_3318.DeviceDesc% = RTL8811au.ndi, USB\VID_2001&PID_3318

[Belkin.NTx86.6.3]
;; For 8192C BELKIN ================================================================
%Belkin.DeviceDesc% = Belkin.ndi, USB\VID_050D&PID_1102
%Belkin-2.DeviceDesc% = Belkin.ndi, USB\VID_050D&PID_2102
%Belkin-3.DeviceDesc% = Belkin.ndi, USB\VID_050D&PID_2103
%Belkin-4.DeviceDesc% = Belkin.ndi, USB\VID_050D&PID_1004

;; For 8192D BELKIN ================================================================
%Belkin-N600DB.DeviceDesc% = BelkinN600.ndi, USB\VID_050D&PID_110A
%Belkin-N450DB.DeviceDesc% = BelkinN450.ndi, USB\VID_050D&PID_1105
%Belkin-N300DB.DeviceDesc% = BelkinN300.ndi, USB\VID_050D&PID_120A

;; For 8812A BELKIN ================================================================
%Belkin-AC950.DeviceDesc% = RTL8812auBelkin.ndi, USB\VID_050D&PID_1109

[BUFFALO.NTx86.6.3]
;; For 8811A BUFFALO ================================================================
%Buffalo-WI-U2-433DM.DeviceDesc% = RTL8811au.ndi, USB\VID_0411&PID_0242 ;For Buffalo WI-U2-433DM

;; For 8812A BUFFALO ================================================================
%Buffalo_025D.DeviceDesc% = RTL8812au.ndi, USB\VID_0411&PID_025D ;For Buffalo WI-U3-866D

[Zyxel.NTx86.6.3]
;; For 8192C ZYXEL ================================================================
%Zyxel.DeviceDesc% = RTL8192cu.ndi, USB\VID_0586&PID_341F
;; For 8812A Zyxel ================================================================
%Zyxel_3426.DeviceDesc% = RTL8812au.ndi, USB\VID_0586&PID_3426

[ATKK.NTx86.6.3]
;; For 8192C ATKK ================================================================
%ATKK.DeviceDesc% = RTL8192cu.ndi, USB\VID_07AA&PID_0056

[TRENDnet.NTx86.6.3]
;; For 8192C TREDENT ================================================================
%TRENDnet.DeviceDesc% = RTL8192cu.ndi, USB\VID_20F4&PID_648B
%TRENDnet_2.DeviceDesc% = RTL8192cu.ndi, USB\VID_20F4&PID_624D

;; For 8192D TREDENT ================================================================
%TRENDnet_3_du.DeviceDesc% = RTL8192du.ndi, USB\VID_20F4&PID_664B

;; For 8812 TREDENT ================================================================
%TRENDnet_805B.DeviceDesc% = RTL8812au.ndi, USB\VID_20F4&PID_805B

;; For 8811A Trendnet ================================================================
%TRENDnet_804B.DeviceDesc% = RTL8811au.ndi, USB\VID_20F4&PID_804B

[Feixun.NTx86.6.3]
;; For 8192C FEXIUN ================================================================
%Feixun.DeviceDesc% = RTL8192cu.ndi, USB\VID_4855&PID_0090 ; Feixun 88CUS for B/G/N
%Feixun.DeviceDesc% = RTL8192cu.ndi, USB\VID_4855&PID_0091 ; Feixun 92CU for B/G/N

[NetweeN.NTx86.6.3]
;; For 8192C NETWEEN ================================================================
%NetweeN.DeviceDesc% = RTL8192cu.ndi, USB\VID_4856&PID_0091 ; Feixun 8188CUS for B/G/N

[XAVI.NTx86.6.3]
;; For 8192C XAVI ================================================================
%XAVI.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFF7 ; XAVI 88CUSlim solo for B/G/N
%XAVI.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFF9 ; XAVI 88CUSlim solo for B/G/N
%XAVI.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFFA ; XAVI 88CUSlim solo for B/G/N
%XAVI88cusc.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFF8 ; XAVI 88CUSlim combo for B/G/N
%XAVI88cusc.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFFB ; XAVI 88CUSlim combo for B/G/N
%XAVI88cusc.DeviceDesc% = RTL8192cu.ndi, USB\VID_04F2&PID_AFFC ; XAVI 88CUSlim combo for B/G/N

[Netgear.NTx86.6.3]
;; For 8192C NETGEAR ================================================================
;;%Netgear.DeviceDesc% = RTL8192cu.ndi, USB\VID_0846&PID_9041 ; Netgear 88CUSfor B/G/N

;; For 8812A Netgear ================================================================
;;%Netgear-A6200v2.DeviceDesc% = RTL8812au.ndi, USB\VID_0846&PID_9051

;; For 8811A Netgear ================================================================

[Oar_Inc.NTx86.6.3]
;; For 8192C OAR ================================================================
%Oar_Inc.DeviceDesc% = RTL8192cu.ndi, USB\VID_2019&PID_AB2E

[ASUS.NTx86.6.3]
;; For 8192C ASUS ================================================================
%ASUS.DeviceDesc% = RTL8192cu.ndi, USB\VID_0B05&PID_17AB
%ASUS-2.DeviceDesc% = RTL8192cu.ndi, USB\VID_0B05&PID_17BA
%ASUS-17C0.DeviceDesc% = RTL8192cu.ndi, USB\VID_0B05&PID_17C0

;; For 8812A ASUS ================================================================
%ASUS_17D2.DeviceDesc% = RTL8812auASUS.ndi, USB\VID_0B05&PID_17D2

[HAWKING.NTx86.6.3]
;; For 8192C HAWKING ================================================================
%Hawking-1.DeviceDesc% = RTL8192cu.ndi, USB\VID_0E66&PID_0019
%Hawking-2.DeviceDesc% = RTL8192cu.ndi, USB\VID_0E66&PID_0020

;; For 8812A ASUS ================================================================
%Hawking_0022.DeviceDesc% = RTL8812au.ndi, USB\VID_0E66&PID_0022

;; For 8811A Hawking ================================================================
%Hawking_0023.DeviceDesc% = RTL8811au.ndi, USB\VID_0E66&PID_0023

[Compare.NTx86.6.3]
;; For 8192C COMPARE ================================================================
%Compare-1.DeviceDesc% = RTL8192cu.ndi, USB\VID_CDAB&PID_8010

[IO_DATA.NTx86.6.3]
;; For 8192C IO_DATA ================================================================
%IO_DATA_094c.DeviceDesc% = RTL8192cu.ndi, USB\VID_04BB&PID_094C
%IO_DATA_0950.DeviceDesc% = RTL8192cu.ndi, USB\VID_04BB&PID_0950

;; For 8812A IO_DATA ================================================================
%IO_DATA_0952.DeviceDesc% = RTL8812au.ndi, USB\VID_04BB&PID_0952

;; For 8811A IO_DATA ================================================================
%IO_DATA_AC433UA.DeviceDesc% = RTL8811au.ndi, USB\VID_04BB&PID_0953
%IO_DATA_0959.DeviceDesc% = RTL8811au_IO_DATA.ndi, USB\VID_04BB&PID_0959

[TPLINK.NTx86.6.3]
;; For 8192C TPLINK ================================================================
%TPLINK-0100.DeviceDesc% = RTL8192cu.ndi, USB\VID_2357&PID_0100

;; For 8812A TPLINK ================================================================
%TPLINK_0101.DeviceDesc% = RTL8812autplink.ndi, USB\VID_2357&PID_0101


[Logitec.NTx86.6.3]
;; For 8192C Logitec ================================================================
%Logitec_016D.DeviceDesc% = RTL8192cu.ndi, USB\VID_0789&PID_016D
;; For 8192D Logitec ================================================================
%Logitec.DeviceDesc% = RTL8192du_5G.ndi, USB\VID_0789&PID_0019

;; For 8812A Logitec ================================================================
%Logitec_016E.DeviceDesc% = RTL8812au.ndi, USB\VID_0789&PID_016E

[NEC.NTx86.6.3]
;; For 8812A NEC ================================================================
%NEC_0408.DeviceDesc% = RTL8812auNEC.ndi, USB\VID_0409&PID_0408

[WD.NTx86.6.3]
;; For 8812A WD ================================================================
%WD_0632.DeviceDesc% = RTL8812au.ndi, USB\VID_1058&PID_0632

[EnGenius.NTx86.6.3]
;; For 8812A EnGenius ================================================================
%EnGenius_0100.DeviceDesc% = RTL8812au.ndi, USB\VID_1740&PID_0100

[Linksys.NTx86.6.3]
;; For 8812A Linksys ================================================================
%Linksys_003F.DeviceDesc% = RTL8812auBelkin.ndi, USB\VID_13B1&PID_003F

[Amped.NTx86.6.3]
;; For 8812A Amped ================================================================
%Amped_9097.DeviceDesc% = RTL8812au.ndi, USB\VID_148F&PID_9097

[ACTIONTEC.NTx86.6.3]
;; For 8192D ACTIONTEC ================================================================
;%ScreenBeam.DeviceDesc% = Actiontec.ndi, USB\VID_1668&PID_8102

[Qihoo.NTx86.6.3]

[Carciofone]

Attenzione: aggiunto al primo post il link di download della versione dei driver D-Link 4.02B01 per la DWA-182 Hw v. Dx .

[antiko]

Salve, alcuni giorni orsono ho acquistato la chiavetta USB in oggetto- Ho installato il drive correttamente e mi sono connesso con il PC windows 10 per diversi giorni senza problemi.
Poi ha smesso di funzionare, un test windows ha detto che potevano esserci problemi di driver.
Ho installato di nuovo da disco, correggendo i driver esistenti. Alla fine i driver sono stati istallati e windows ha visto correttamente di nuovo la chiavetta tra le risorse disponibili.
Ho però visualizzato il messaggio MSR OVER LIMIT".
Cosa significa? cosa devo fare?
grazie mille 

[Pondera]

@antiko
Che revisione hardware è la tua chiavetta? Lo trovi scritto nell'etichetta adesiva sul retro:




Che versione driver hai installato? Dove lo hai scaricato?